Inicio Interruptores y multiplexores Interruptores y multiplexores analógicos
Inicio
Interruptores y multiplexores
Interruptores y multiplexores analógicos
NUEVO

TMUXS7614D

PRESENTACIÓN PRELIMINAR

Interruptor de precisión 1:1 (SPST) de ocho canales, 50 V y RON de 1 Ω controlado por SPI con lógica

Haga su pedido ahora
Hoja de datos

TMUXS7614D

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Configuration 1:1 SPST Number of channels 8 Power supply voltage - single (V) 5, 12, 16, 20, 36, 40 Power supply voltage - dual (V) +/- 25, +/-10, +/-15, +/-18, +/-22, +/-5 Protocols SPI Ron (typ) (Ω) 1 CON (typ) (pF) 22 ON-state leakage current (max) (µA) 0.0008 Supply current (typ) (µA) 840 Bandwidth (MHz) 180 Operating temperature range (°C) -40 to 125 Features 1.2-V compatible control inputs, 1.8-V compatible control inputs, Break-before-make Input/output continuous current (max) (mA) 470 Rating Catalog Supply voltage (max) (V) 42 Negative rail supply voltage (max) (V) -25
Configuration 1:1 SPST Number of channels 8 Power supply voltage - single (V) 5, 12, 16, 20, 36, 40 Power supply voltage - dual (V) +/- 25, +/-10, +/-15, +/-18, +/-22, +/-5 Protocols SPI Ron (typ) (Ω) 1 CON (typ) (pF) 22 ON-state leakage current (max) (µA) 0.0008 Supply current (typ) (µA) 840 Bandwidth (MHz) 180 Operating temperature range (°C) -40 to 125 Features 1.2-V compatible control inputs, 1.8-V compatible control inputs, Break-before-make Input/output continuous current (max) (mA) 470 Rating Catalog Supply voltage (max) (V) 42 Negative rail supply voltage (max) (V) -25
FCLGA (ZEM) 30 20 mm² 5 x 4
  • Dual supply range: ±4.5V to ±25V
  • Single supply range: 4.5V to 42V
  • Asymmetric dual supply support (For example: VDD=37.5V, VSS=-12.5V)
  • 1.8V logic compatible
  • SPI supply range: 1.8V – 5.5V
  • SPI Interface with support up to 50MHz
    • Manual mode (Standard SPI or Burst mode)
    • SPI error detection: CRC, invalid read/write, and clock count error
    • Compatible with SPI industry standard modes 0 and 3
  • Ultra high channel density (2.5mm2/ch)
    • Flow through SPI and supply routing for increased board density
    • Integrated decoupling capacitors
  • Precision performance:
    • Low on-resistance: 1Ω (typical)
    • Ultra low on-resistance flatness: 0.001Ω (typical)
    • Low on-leakage current: 13pA (typical), 350pA (maximum)
    • Ultra low charge injection: 2pC (typical)
  • High current support: 470mA per channel (maximum)
  • –40°C to +125°C operating temperature
  • Rail-to-rail operation
  • Bidirectional operation
  • Break-before-make switching
  • ESD protection HBM: 3000V
  • Dual supply range: ±4.5V to ±25V
  • Single supply range: 4.5V to 42V
  • Asymmetric dual supply support (For example: VDD=37.5V, VSS=-12.5V)
  • 1.8V logic compatible
  • SPI supply range: 1.8V – 5.5V
  • SPI Interface with support up to 50MHz
    • Manual mode (Standard SPI or Burst mode)
    • SPI error detection: CRC, invalid read/write, and clock count error
    • Compatible with SPI industry standard modes 0 and 3
  • Ultra high channel density (2.5mm2/ch)
    • Flow through SPI and supply routing for increased board density
    • Integrated decoupling capacitors
  • Precision performance:
    • Low on-resistance: 1Ω (typical)
    • Ultra low on-resistance flatness: 0.001Ω (typical)
    • Low on-leakage current: 13pA (typical), 350pA (maximum)
    • Ultra low charge injection: 2pC (typical)
  • High current support: 470mA per channel (maximum)
  • –40°C to +125°C operating temperature
  • Rail-to-rail operation
  • Bidirectional operation
  • Break-before-make switching
  • ESD protection HBM: 3000V

The TMUXS7614D is a complementary metal-oxide semiconductor (CMOS) switch device with eight independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device works with a single supply (4.5V to 42V), dual supplies (±4.5V to ±25V), or asymmetric supplies (such as VDD = 37.5V, VSS = –12V). The TMUXS7614D supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from VSS to VDD.

The switches of the TMUXS7614D are controlled with a serial peripheral interface (SPI). The SPI interface has many error detection features, such as CRC, invalid read/write, and clock count error detection. The SPI also supports Daisy Chain mode. Coupled with the flow through routing of the SPI pins, this allows for increased channel density in the system. The TMUXS7614D is a part of the precision switches and multiplexers family of devices that have very low on and off leakage currents allowing them to be used in high precision measurement applications.

The TMUXS7614D is a complementary metal-oxide semiconductor (CMOS) switch device with eight independently selectable 1:1, single-pole, single-throw (SPST) switch channels. The device works with a single supply (4.5V to 42V), dual supplies (±4.5V to ±25V), or asymmetric supplies (such as VDD = 37.5V, VSS = –12V). The TMUXS7614D supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins ranging from VSS to VDD.

The switches of the TMUXS7614D are controlled with a serial peripheral interface (SPI). The SPI interface has many error detection features, such as CRC, invalid read/write, and clock count error detection. The SPI also supports Daisy Chain mode. Coupled with the flow through routing of the SPI pins, this allows for increased channel density in the system. The TMUXS7614D is a part of the precision switches and multiplexers family of devices that have very low on and off leakage currents allowing them to be used in high precision measurement applications.

filter Buscar otro/a Interruptores y multiplexores analógicos
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet TMUXS7614D 50V, SPI Controlled, Low-RON, High Density, 1:1 (SPST), 8-Channel Precision Switches with 1.8V Logi datasheet (Rev. B) 30 oct 2024
Application note Using SPI Controlled MUX To Increase Channel Density PDF | HTML 14 jun 2024
Application note When to Replace a Relay With a Multiplexer (Rev. A) PDF | HTML 07 jun 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMUXS7614DEVM — Módulo de evaluación TMUXS7614D

El TMUXS7614DEVM se utiliza para evaluar el rendimiento del TMUXS7614D. El módulo de evaluación (EVM) viene con el dispositivo TMUXS7614D soldado. El EVM permite a los ingenieros evaluar fácilmente el TMUXS7614D para las aplicaciones, es decir, realizar pruebas y mediciones.
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TMUX76XX-8SW-TMUXS7614 IBIS Model

SCDM329.ZIP (37 KB) - IBIS Model
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
FCLGA (ZEM) 30 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos