패키징 정보
| 패키지 | 핀 CBGA (GEM) | 192 |
| 작동 온도 범위(°C) -55 to 125 |
| 패키지 수량 | 캐리어 1 | JEDEC TRAY (5+1) |
DAC5670-SP의 주요 특징
- 14-Bit Resolution
- 2.4-GSPS Max Update Rate DAC
- Dual Differential Input Ports
- Even/Odd Demultiplexed Data
- Maximum 1.2 GSPS Each Port,
2.4 GSPS Total - Dual 14-Bit Inputs + 1 Reference
Bit - DDR Output Clock
- DLL Optimized Clock Timing
Synchronized to Reference Bit - LVDS and HyperTransport
Voltage Level Compatible - Internal 100-Ω Terminations for
Data and Reference Bit Inputs
- Selectable 2× Interpolation With
Fs / 2 Mixing - Differential Scalable Current Outputs:
5 to 30 mA - On-Chip 1.2-V Reference
- 3.3-V Analog Supply Operation
- Power Dissipation: 2 W
- 192-Ball CBGA (GEM) Package
- QML-V Qualified, SMD 5962-07247
- Military Temperature Range (–55°C to
125°C Tcase) - APPLICATIONS
- Test and Measurement: Arbitrary
Waveform Generator - Communications
- Engineering evaluation (/EM) samples
are available(1)
- Test and Measurement: Arbitrary
(1) These units are intended for engineering evaluation only. They are processed to a non-compliant flow (that is, no burn-in, and so forth) and are tested to a temperature rating of 25°C only. These units are not suitable for qualification, production, radiation testing, or flight use. Parts are not warranted for performance over the full MIL specified temperature range of –55°C to 125°C or operating life.
All other trademarks are the property of their respective owners.
DAC5670-SP에 대한 설명
The DAC5670 is a 14-bit 2.4-GSPS DAC with dual demultiplexed differential input ports. The DAC5670 is clocked at the DAC sample rate and the two input ports run at a maximum of 1.2 GSPS. An additional reference bit input sequence is used to adjust the output clock delay to the data source, optimizing the internal data latching clock relative to this reference bit with a delay lock loop (DLL). Alternatively, the DLL may be bypassed and the timing interface managed by controlling DATA setup and hold timing to DLYCLK.
The DAC5670 can also accept data up to 1.2 GSPS using only the A input port. In the single port modes, options include: repeating the input sample (A_ONLY mode), 2× interpolation by zero stuff (A_ONLY_ZS mode), or 2× interpolation by repeating and inverting the input sample (A_ONLY_INV). These modes are used to double the input sample rate up to 2.4 GSPS.
The DAC5670 operates with a single 3- to 3.6-V supply voltage. Power dissipation is 2 W at maximum operating conditions. The DAC5670 provides a nominal full-scale differential current-output of 20 mA, supporting both single-ended and differential applications. An on-chip 1.2-V temperature-compensated bandgap reference and control amplifier allows the user to adjust the full-scale output current from the nominal 20 mA to as low as 5 mA or as high as 30 mA.
The output current can be directly fed to the load with no additional external output buffer required. The device has been specifically designed for a differential transformer-coupled output with a 50-Ω doubly-terminated load.
The DAC5670 is available in a 192-ball CBGA package. The device is characterized for operation over the military temperature range (–55°C to 125°C Tcase).
