설계 툴
DRV3233-Q1
- AEC-Q100 Test Guidance for automotive applications
- Device ambient temperature: –40°C to +150°C
- Functional Safety-Compliant targeted
- Developed for functional safety applications
- Documentation to aid ISO 26262 system design will be available upon production release
- Systematic capability up to ASIL D targeted
- Three phase half-bridge gate driver
- Drives six N-channel MOSFETs (NMOS)
- 4.5 to 60-V wide operating voltage range
- Bootstrap architecture for high-side gate driver
- Charge pump to support 100% PWM duty cycle and to generate overdrive supply
- Smart Gate Drive architecture
- 45-level configurable peak gate drive current up to 1000 / 2000-mA (source / sink)
- Low-side Current Sense Amplifier
- Sub-1 mV low input offset across temperature
- 9-level adjustable gain
- SPI-based detailed configuration and diagnostics
- DRVOFF pin to disable driver independently
- High voltage wake up pin (nSLEEP)
- Multiple PWM interface options available
- 6x, 3x, 1x PWM Modes
- PWM over SPI
- Supports 3.3-V, and 5-V Logic Inputs
- Optional programmable OTP for reset settings
- Advanced and configurable protection features
- Battery and power supply voltage monitors
- Phase feedback comparator
- MOSFET V DS and R sense over current monitors
- MOSFET V GS gate fault monitors
- Internal regulator and clock monitors
- Analog Built-In-Self-Test (ABIST)
- Device thermal warning and shutdown
- Fault condition indicator pin
The DRV3233 is an integrated smart gate driver for 12-V and 24-V automotive three-phase BLDC applications. The device provides three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The DRV3233 generates the correct gate drive voltages using an integrated bootstrap diode and a GVDD charge pump. The Smart Gate Drive architecture supports configurable peak gate drive current from 0.7-mA up to 1-A source and 2-A sink. The DRV3233 can operate from a single power supply with a wide input range of 4.5 to 60-V. A trickle charge pump allows for the gate drivers to support 100% PWM duty cycle control, and provides overdrive gate drive voltage of external switches.
The DRV3233 provides low-side current sense amplifiers to support resistor based low-side current sensing. The low offset of the amplifiers enables the system to obtain precise motor current measurement.
A wide range of diagnostics and protection features integrated in the DRV3233 enable a robust motor drive system design and help eliminate the needs of external components. The highly configurable device response allows the device to be integrated seamlessly into a variety of system designs.
Request more information
The full data sheet is available. Request now
Evaluation module information is available. Request now
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DRV3233-Q1 Automotive 24/12-V Battery 3-Phase Gate Driver Unit with accurate current sensing and enhanced diagnostics datasheet | PDF | HTML | 2020/12/21 |
| Application brief | Striking a Balance: Automotive Designs for Enhanced Efficiency and EMI Control | PDF | HTML | 2023/10/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PHP) | 48 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치