DRV8804
The following Figure shows how two DRV81646 devices can be connected in daisy chain to leverage GPIO/ isolation saving. SDO pin of one device is fed to the SDI pin of the following device in the chain
To write to two devices , 8 bits of data need to be written as shown in Figure . Note SDO is sent out on Negedge of SCLK. SDO is ready to be sampled on following posedge of SCLK. The value on SDI pin is also sampled on posedge of SCLK. Note Latch need not be brought low to initiate a shift in of data. A posedge of Latch is needed to Latch the data shifted in to Outputs.
The DRV8804 provides a 4-channel low-side driver with overcurrent protection. The device has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
In the SOIC (DW) package, the DRV8804 can supply up to 1.5A (one channel on) or 800mA (all channels on) continuous output current per channel, at 25°C. In the HTSSOP (PWP) package, the device can supply up to 2A (one channel on) or 1A (four channels on) continuous output current per channel, at 25°C . In the SOT-23-THN (DYZ) package, the DRV8804 can supply up to 1.9A (one channel on) or 900mA (all channels on) continuous output current per chanel, at 25°C with proper PCB heatsinking.
A serial interface is provided including a serial data output, which can be daisy-chained to control multiple devices with one serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8804 is available in a 20-pin, thermally-enhanced SOIC package , 16-pin HTSSOP package and 16-pin SOT-23-THN package (Eco-friendly: RoHS & no Sb/Br).
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8804 Quad Serial Interface Low-Side Driver IC datasheet (Rev. G) | PDF | HTML | 2024/12/10 |
| Application note | Understanding Motor Driver Current Ratings (Rev. A) | PDF | HTML | 2024/07/05 | |
| Application note | Using DRV to Drive Solenoids (Rev. A) | PDF | HTML | 2022/04/24 | |
| Application note | How to Drive Unipolar Stepper Motor with the DRV8xxx | PDF | HTML | 2021/12/03 | |
| Application note | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021/10/14 | |
| Application note | Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) | PDF | HTML | 2021/07/22 | |
| Technical article | Drive unipolar stepper motors as bipolar stepper motors with a simple wiring recon | PDF | HTML | 2020/04/09 | |
| Application note | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018/07/06 | ||
| User guide | DRV8803-04-05-06 EVM GUI (Rev. B) | 2017/04/26 | ||
| More literature | TM4C123x Stepper Motor Control Product Summary | 2015/07/06 | ||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 2004/05/12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8804EVM — DRV8804 평가 모듈
The DRV8804 evaluation module consists of a quad low-side motor driver with serial control interface that can be used to drive a unipolar stepper motor, up to 4 DC motors or other loads like solenoids. With the DRV8804EVM, designers can quickly and easily evaluate the performance of DRV8804 motor (...)
TIDA-00236 — PLC용 저압측 0.5A 8채널 디지털 출력 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 16 | Ultra Librarian |
| SOIC (DW) | 20 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.