홈 로직 및 전압 변환 전압 변환기 및 레벨 시프터 방향 제어 전압 변환기
홈
로직 및 전압 변환
전압 변환기 및 레벨 시프터
방향 제어 전압 변환기

SN74LXCH8T245

활성

8비트 듀얼 공급 버스 트랜시버 - 구성 가능한 전압 변환 및 3상 출력 포함

지금 주문
데이터 시트

SN74LXCH8T245

활성
데이터 시트 지금 주문

제품 상세 정보

Technology family LXC Applications GPIO, JTAG, SPI, UART Bits (#) 8 High input voltage (min) (V) 0.44 High input voltage (max) (V) 5.5 Vout (min) (V) 1.1 Vout (max) (V) 5.5 Data rate (max) (Mbps) 420 IOH (max) (mA) -32 IOL (max) (mA) 32 Supply current (max) (µA) 12 Features Bus-hold, Integrated pulldown resistors, Output enable, Overvoltage tolerant inputs, Partial power down (Ioff), Vcc disconnect, Vcc isolation Input type Schmitt-Trigger Output type 3-State Rating Catalog Operating temperature range (°C) -40 to 125
Technology family LXC Applications GPIO, JTAG, SPI, UART Bits (#) 8 High input voltage (min) (V) 0.44 High input voltage (max) (V) 5.5 Vout (min) (V) 1.1 Vout (max) (V) 5.5 Data rate (max) (Mbps) 420 IOH (max) (mA) -32 IOL (max) (mA) 32 Supply current (max) (µA) 12 Features Bus-hold, Integrated pulldown resistors, Output enable, Overvoltage tolerant inputs, Partial power down (Ioff), Vcc disconnect, Vcc isolation Input type Schmitt-Trigger Output type 3-State Rating Catalog Operating temperature range (°C) -40 to 125
TSSOP (PW) 24 49.92 mm² 7.8 x 6.4 VQFN (RHL) 24 19.25 mm² 5.5 x 3.5
  • Fully Configurable Dual-Rail Design Allows Each Port to Operate from 1.1 V to 5.5 V
  • Robust, Glitch-Free Power Supply Sequencing
  • Up to 420-Mbps Support for 3.3 V to 5.0 V
  • Bus Hold on Data Inputs Eliminates the Need for External Pull-Up and Pull-Down Resistors
  • Schmitt-Trigger Control Inputs Allow for Slow or Noisy Inputs
  • Control Inputs with Integrated Static Pull-Down Resistors Allow for Floating Control Inputs
  • High Drive Strength (up to 32 mA at 5 V)
  • Low Power Consumption
    • 4-µA Maximum (25°C)
    • 12-µA Maximum (–40°C to 125°C)
  • VCC Isolation and VCC Disconnect feature
    • If Either VCC Supply is < 100 mV All I/O’s Become High-Impedance
    • Ioff-float Supports VCC Disconnect Operation
  • Ioff Supports Partial-Power-Down Mode Operation
  • Compatible with LVC Family Level Shifters
  • Control Logic (DIR and OE) are Referenced to VCCA
  • Operating Temperature from –40°C to +125°C
  • Latch-Up Performance Exceeds 100 mA per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 4000-V Human-Body Model
    • 1000-V Charged-Device Model
  • Fully Configurable Dual-Rail Design Allows Each Port to Operate from 1.1 V to 5.5 V
  • Robust, Glitch-Free Power Supply Sequencing
  • Up to 420-Mbps Support for 3.3 V to 5.0 V
  • Bus Hold on Data Inputs Eliminates the Need for External Pull-Up and Pull-Down Resistors
  • Schmitt-Trigger Control Inputs Allow for Slow or Noisy Inputs
  • Control Inputs with Integrated Static Pull-Down Resistors Allow for Floating Control Inputs
  • High Drive Strength (up to 32 mA at 5 V)
  • Low Power Consumption
    • 4-µA Maximum (25°C)
    • 12-µA Maximum (–40°C to 125°C)
  • VCC Isolation and VCC Disconnect feature
    • If Either VCC Supply is < 100 mV All I/O’s Become High-Impedance
    • Ioff-float Supports VCC Disconnect Operation
  • Ioff Supports Partial-Power-Down Mode Operation
  • Compatible with LVC Family Level Shifters
  • Control Logic (DIR and OE) are Referenced to VCCA
  • Operating Temperature from –40°C to +125°C
  • Latch-Up Performance Exceeds 100 mA per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 4000-V Human-Body Model
    • 1000-V Charged-Device Model

The SN74LXCH8T245 is an 8-bit, dual-supply noninverting bidirectional voltage level translation device with bus-hold circuitry. Ax pins and control pins (DIR and OE) are referenced to VCCA logic levels, and Bx pins are referenced to VCCB logic levels. The A port is able to accept I/O voltages ranging from 1.1 V to 5.5 V, while the B port can accept I/O voltages from 1.1 V to 5.5 V. A high on DIR allows data transmission from A to B and a low on DIR allows data transmission from B to A when OE is set to low. When OE is set to high, both Ax and Bx pins are in the high-impedance state. See Device Functional Modes for a summary of the operation of the control logic.

The SN74LXCH8T245 is an 8-bit, dual-supply noninverting bidirectional voltage level translation device with bus-hold circuitry. Ax pins and control pins (DIR and OE) are referenced to VCCA logic levels, and Bx pins are referenced to VCCB logic levels. The A port is able to accept I/O voltages ranging from 1.1 V to 5.5 V, while the B port can accept I/O voltages from 1.1 V to 5.5 V. A high on DIR allows data transmission from A to B and a low on DIR allows data transmission from B to A when OE is set to low. When OE is set to high, both Ax and Bx pins are in the high-impedance state. See Device Functional Modes for a summary of the operation of the control logic.
filter 기타 방향 제어 전압 변환기 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet SN74LXCH8T245 8-bit Translating Transceiver with Configurable Level Shifting datasheet (Rev. B) PDF | HTML 2021/03/15
Application note Schematic Checklist - A Guide to Designing With Fixed or Direction Control Translators PDF | HTML 2024/10/02
Application note Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators PDF | HTML 2024/07/12
Application note Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024/07/03
Application brief Bringing Together 5G Signal Chains With Level Translation PDF | HTML 2021/03/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

AVCLVCDIRCNTRL-EVM — AVC 및 LVC를 지원하는 방향 제어 양방향 변환 디바이스를 위한 일반 EVM

The generic EVM is designed to support one, two, four and eight channel LVC and AVC direction-controlled translation devices. It also supports the bus hold and automotive -Q1 devices in the same number of channels. The AVC are low voltage translation devices with lower drive strength of 12mA. LVC (...)

사용 설명서: PDF
TI.com에서 구매 불가
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
TSSOP (PW) 24 Ultra Librarian
VQFN (RHL) 24 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상