TXS0101

활성

오픈 드레인 및 푸시-풀 애플리케이션을 위한 1비트 양방향 전압 레벨 시프터

지금 주문

데이터 시트

document-pdfAcrobat TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet (Rev. D) (영어) PDF | HTML

TXS0101

활성

데이터 시트

지금 주문

제품 상세 정보

Technology family

TXS

Bits (#)

1

Data rate (max) (Mbps)

24

High input voltage (min) (V)

1.45

High input voltage (max) (V)

5.5

Vout (min) (V)

1.65

Vout (max) (V)

5.5

IOH (max) (mA)

0

IOL (max) (mA)

0

Supply current (max) (µA)

14.4

Features

Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation

Input type

Transmission Gate

Output type

3-State, Transmission Gate

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

TXS

Bits (#)

1

Data rate (max) (Mbps)

24

High input voltage (min) (V)

1.45

High input voltage (max) (V)

5.5

Vout (min) (V)

1.65

Vout (max) (V)

5.5

IOH (max) (mA)

0

IOL (max) (mA)

0

Supply current (max) (µA)

14.4

Features

Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation

Input type

Transmission Gate

Output type

3-State, Transmission Gate

Rating

Catalog

Operating temperature range (°C)

-40 to 85

DSBGA (YZP)

6

2.1875 mm² 1.75 x 1.25

SOT-23 (DBV)

6

8.12 mm² 2.9 x 2.8

SOT-5X3 (DRL)

6

2.56 mm² 1.6 x 1.6

SOT-SC70 (DCK)

6

4.2 mm² 2 x 2.1

Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- A Port
  - 2500 V Human-Body Model (A114-B)
  - 200 V Machine Model (A115-A)
  - 1500 V Charged-Device Model (C101)
- B Port
  - 8 kV Human-Body Model (A114-B)
  - 200 V Machine Model (A115-A)
  - 1500 V Charged-Device Model (C101)
No Direction-Control Signal Needed
Maximum Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
Available in the Texas Instruments NanoFree™ Package
1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (V_CCA ≤ V_CCB)
V_CC Isolation Feature – If Either V_CC Input Is at GND, Both Ports Are in the High-Impedance State
No Power-Supply Sequencing Required – Either V_CCA or V_CCB Can be Ramped First
I_off Supports Partial-Power-Down Mode Operation

Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- A Port
  - 2500 V Human-Body Model (A114-B)
  - 200 V Machine Model (A115-A)
  - 1500 V Charged-Device Model (C101)
- B Port
  - 8 kV Human-Body Model (A114-B)
  - 200 V Machine Model (A115-A)
  - 1500 V Charged-Device Model (C101)
No Direction-Control Signal Needed
Maximum Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
Available in the Texas Instruments NanoFree™ Package
1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (V_CCA ≤ V_CCB)
V_CC Isolation Feature – If Either V_CC Input Is at GND, Both Ports Are in the High-Impedance State
No Power-Supply Sequencing Required – Either V_CCA or V_CCB Can be Ramped First
I_off Supports Partial-Power-Down Mode Operation

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track V_CCA. V_CCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track V_CCB. V_CCA must be less than or equal to V_CCB. V_CCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low voltage bidirectional translation between any of the 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track V_CCA. V_CCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track V_CCB. V_CCA must be less than or equal to V_CCB. V_CCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low voltage bidirectional translation between any of the 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

filter

기타 자동 방향 전압 변환기 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

TXS0104E

활성

오픈 드레인 및 푸시-풀 애플리케이션을 위한 4비트 양방향 전압 레벨 시프터 Same function for 4-channel voltage translator

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

12개 모두 보기

	유형	직함		날짜
*	Data sheet	TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet (Rev. D)	PDF \| HTML	2017/06/22
	Application note	Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators	PDF \| HTML	2024/07/12
	Application note	Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A)	PDF \| HTML	2024/07/03
	Application brief	Integrated vs. Discrete Open Drain Level Translation	PDF \| HTML	2024/01/09
	Application note	Leveraging Edge Rate Accelerators with Auto-Sensing Level Shifters	PDF \| HTML	2023/09/29
	Application note	Do’s and Don’ts for TXB and TXS Voltage Level-Shifters with Edge Rate Accelerato	PDF \| HTML	2023/06/28
	EVM User's guide	TXS-EVM User's Guide (Rev. B)	PDF \| HTML	2021/06/08
	Selection guide	Voltage Translation Buying Guide (Rev. A)		2021/04/15
	Application note	Effects of pullup and pulldown resistors on TXS and TXB devices (Rev. A)		2018/03/28
	Application note	Factors Affecting VOL for TXS and LSF Auto-bidirectional Translation Devices		2017/11/19
	Application note	Biasing Requirements for TXS, TXB, and LSF Auto-Bidirectional Translators		2017/10/30
	Application note	A Guide to Voltage Translation With TXS-Type Translators		2010/06/29

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

5-8-LOGIC-EVM — 5핀~8핀 DCK, DCT, DCU, DRL 및 DBV 패키지용 일반 논리 평가 모듈

5~8핀 수의 DCK, DCT, DCU, DRL 또는 DBV 패키지가 있는 모든 디바이스를 지원하도록 설계된 유연한 EVM.

사용 설명서: PDF

TI.com에서 구매 불가

평가 보드

TXS-EVM — Translator family evaluation module for single-, dual-, quad- and octal-channel devices

The TXS-EVM is designed to support single, dual, quad and octal channel TXS devices. The TXS devices belong to the auto bidirectional voltage level translation family with an operating voltage between 1.2V and 5.5 V designed to support various generic voltage level translation applications across (...)

사용 설명서: PDF | HTML