TXS0101-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results
- Device temperature grade 1: -40°C to +125°C ambient operating temperature range
- Latch-up performance exceeds 100mA per JESD 78, class II
- ESD protection exceeds JESD 22:
- A Port:
- 2500V Human-Body Model (A114-B)
- 200V Machine Model (A115-A)
- 1500V Charged-Device Model (C101)
- B port:
- 8kV Human-Body Model (A114-B)
- 200V Machine Model (A115-A)
- 1500V Charged-Device Model (C101)
- A Port:
- No direction-control signal needed
- Maximum data rates:
- 50Mbps (push pull)
- 2Mbps (open drain)
- 1.2V to 3.6V on A port and 1.65V to 5.5V on B port
- VCCA may be greater than, less than, or equal to VCCB
- VCC isolation feature – if either VCC input is at GND, both ports are in the high-impedance state
- No power-supply sequencing required – either VCCA or VCCB can be ramped first
- Ioff supports partial-power-down mode operation
This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2V to 3.6V. VCCA may be greater than or equal to VCCB as long as VCCA is less than 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for low voltage bidirectional translation between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
To put the device in the high-impedance state during power up or power down, tie OE to GND through a pull-down resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TXS0101-Q1 Automotive 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications datasheet | PDF | HTML | 2024/06/11 |
Application note | Leveraging Edge Rate Accelerators with Auto-Sensing Level Shifters | PDF | HTML | 2023/09/29 | |
Application note | Do’s and Don’ts for TXB and TXS Voltage Level-Shifters with Edge Rate Accelerato | PDF | HTML | 2023/06/28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
5-8-LOGIC-EVM — 5핀~8핀 DCK, DCT, DCU, DRL 및 DBV 패키지용 일반 논리 평가 모듈
TXS-EVM — Translator family evaluation module for single-, dual-, quad- and octal-channel devices
The TXS-EVM is designed to support single, dual, quad and octal channel TXS devices. The TXS devices belong to the auto bidirectional voltage level translation family with an operating voltage between 1.2V and 5.5 V designed to support various generic voltage level translation applications across (...)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
SOT-SC70 (DCK) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치