產品詳細資料

Haptic actuator type ERM, LRA Features Auto resonance Input signal Analog, PWM Vs (min) (V) 2.5 Vs (max) (V) 5.2 Vout (max) (V) 3.6 Peak-to-peak output voltage (max) (V) 10.4 Iq (typ) (mA) 1.7 Shutdown current (ISD) (µA) 0.3 Startup time (ms) 1.3 Operating temperature range (°C) -40 to 85 Rating Catalog
Haptic actuator type ERM, LRA Features Auto resonance Input signal Analog, PWM Vs (min) (V) 2.5 Vs (max) (V) 5.2 Vout (max) (V) 3.6 Peak-to-peak output voltage (max) (V) 10.4 Iq (typ) (mA) 1.7 Shutdown current (ISD) (µA) 0.3 Startup time (ms) 1.3 Operating temperature range (°C) -40 to 85 Rating Catalog
WQFN (RUN) 10 4 mm² 2 x 2
  • Flexible Haptic/Vibra Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • Auto Resonance Tracking for LRA
    • No Frequency Calibration Required
    • Automatic Drive Commutation
    • Automatic Braking Algorithm
    • Wide Input PWM Frequency Range
  • Constant Vibration Strength Over Supply
  • Automatic Input Level Translation
  • 0% to 100% Duty Cycle Control Range
  • Fast Start Up Time
  • Differential Drive from Single-Ended Input
  • Wide Supply Voltage Range of 2.5 V to 5.2 V
  • Immersion TouchSense® 3000 Compatible
  • 1.8-V Compatible, 5-V Tolerant Digital Pins
  • Available in a 2 mm × 2 mm × 0.75 mm Leadless QFN Package (RUN)
  • Flexible Haptic/Vibra Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • Auto Resonance Tracking for LRA
    • No Frequency Calibration Required
    • Automatic Drive Commutation
    • Automatic Braking Algorithm
    • Wide Input PWM Frequency Range
  • Constant Vibration Strength Over Supply
  • Automatic Input Level Translation
  • 0% to 100% Duty Cycle Control Range
  • Fast Start Up Time
  • Differential Drive from Single-Ended Input
  • Wide Supply Voltage Range of 2.5 V to 5.2 V
  • Immersion TouchSense® 3000 Compatible
  • 1.8-V Compatible, 5-V Tolerant Digital Pins
  • Available in a 2 mm × 2 mm × 0.75 mm Leadless QFN Package (RUN)

The DRV2603 is a haptic driver designed specifically to solve common obstacles in driving both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) haptic elements. The DRV2603 is designed for low latency, high efficiency, and more drive strength for actuators commonly used for tactile feedback in the portable market.

LRA actuators typically have a narrow frequency band over which they have an adequate haptic response. This frequency window is typically ±2.5 Hz wide or less, so driving an LRA actuator presents a challenge. The DRV2603 solves this problem by employing auto resonance tracking, which automatically detects and tracks the LRA resonant frequency in real time. This means that any input PWM frequency within the input range (10 kHz to 250 kHz) will automatically produce the correct resonant output frequency. As an additional benefit, the DRV2603 implements an automatic braking algorithm to prevent LRA ringing at the end of waveforms, leaving the user with a crisp haptic sensation.

For both ERM and LRA actuators, the automatic input level translation solves issues with low voltage PWM sources without adding additional external components, so if the digital I/O levels vary, the output voltage does not change. The DRV2603 also has supply correction that ensures no supply regulation is required for constant vibration strength, allowing an efficient, direct-battery connection.

The DRV2603 is a haptic driver designed specifically to solve common obstacles in driving both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) haptic elements. The DRV2603 is designed for low latency, high efficiency, and more drive strength for actuators commonly used for tactile feedback in the portable market.

LRA actuators typically have a narrow frequency band over which they have an adequate haptic response. This frequency window is typically ±2.5 Hz wide or less, so driving an LRA actuator presents a challenge. The DRV2603 solves this problem by employing auto resonance tracking, which automatically detects and tracks the LRA resonant frequency in real time. This means that any input PWM frequency within the input range (10 kHz to 250 kHz) will automatically produce the correct resonant output frequency. As an additional benefit, the DRV2603 implements an automatic braking algorithm to prevent LRA ringing at the end of waveforms, leaving the user with a crisp haptic sensation.

For both ERM and LRA actuators, the automatic input level translation solves issues with low voltage PWM sources without adding additional external components, so if the digital I/O levels vary, the output voltage does not change. The DRV2603 also has supply correction that ensures no supply regulation is required for constant vibration strength, allowing an efficient, direct-battery connection.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 11
類型 標題 日期
* Data sheet DRV2603 Haptic Drive With Auto-Resonance Detection for Linear Resonance Actuators (LRA) datasheet (Rev. C) PDF | HTML 2016年 8月 10日
Application note Haptic Implementation Considerations for Mobile and Wearable Devices (Rev. A) PDF | HTML 2021年 11月 14日
Application note Benefits of Auto-Resonance Tracking (Rev. A) PDF | HTML 2021年 11月 11日
Application note Haptic Energy Consumption (Rev. A) PDF | HTML 2021年 9月 28日
Application note LRA Actuators: How to Move Them? 2014年 11月 3日
Product overview Haptic Solutions for Wearable Devices (Rev. A) 2014年 9月 30日
User guide DRV2603 ERM/LRA Haptic Driver Evaluation Kit (Rev. B) 2013年 9月 24日
Product overview Automotive Haptics Solutions 2013年 9月 16日
Product overview Haptics: Touch feedback that really moves you (Rev. A) 2013年 1月 8日
More literature Haptics: Solutions for ERM and LRA Actuators 2012年 12月 18日
More literature DRV2603EVK-CT Quick Start Guide 2012年 4月 20日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV2603EVM-CT — DRV2603 評估模組

The DRV2603 is a haptic driver designed to control Linear Resonant Actuators (LRA) and Eccentric Rotating Mass (ERM) motors. The DRV2603 provides many features which help eliminate the design complexities of haptic motor control including reduced solution size, high efficiency output drive, (...)

使用指南: PDF
TI.com 無法提供
軟體開發套件 (SDK)

MSP430-HAPTOUCH-SDK — 具有觸覺回饋的 MSP430TCH5E 電容式觸控軟體開發套件

This is a software development kit for the MSP430TCH5E HAPTOUCH booster pack. It also includes MSP430 Launchpad software (for PC communication) and PC applications (to experience PC gaming) with capacitive touch and Immersion Touchsense 2200™ haptics.

Learn more about the MSP430TCH5E HAPTOUCH (...)
使用指南: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RUN) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片