支援軟體
DRV8840
- Single H-Bridge Current-Control Motor Driver
- 8.2-V to 45-V Operating Supply Voltage Range
- Five Bit Current Control Allows up to 32 Current Levels
- Low MOSFET R DS(on) Typical 0.4 Ω (HS + LS)
- 5-A Maximum Drive Current at 24 V, T A = 25°C
- Built-In 3.3-V Reference Output
- Parallel Digital Control Interface
- Thermal Enhanced Surface Mount Package
- Protection Features:
- Overcurrent Protection (OCP)
- Thermal Shutdown (TSD)
- VM Undervoltage Lockout (UVLO)
- Fault Condition Indication Pin (nFAULT)
The DRV8840 provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has one H-bridge driver, and is intended to drive one DC motor. The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The DRV8840 can supply up to 5-A peak or 3.5-A output current (with proper heatsinking at 24 V and 25°C).
A simple parallel digital control interface is compatible with industry-standard devices. Decay mode is programmable to allow braking or coasting of the motor when disabled.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature.
The DRV8840 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8840 DC Motor Driver IC datasheet (Rev. E) | PDF | HTML | 2023年 3月 23日 |
| Application note | Understanding Motor Driver Current Ratings (Rev. A) | PDF | HTML | 2024年 7月 5日 | |
| Application note | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021年 10月 14日 | |
| Application note | Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) | PDF | HTML | 2021年 7月 22日 | |
| Application note | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021年 1月 19日 | |
| Application note | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018年 7月 6日 | ||
| Technical article | Motor Drive Forum Top FAQs: Understanding current ratings | PDF | HTML | 2015年 7月 23日 | |
| Technical article | Motor Drive forum Top FAQs Part 2: How to estimate motor regeneration and VM pumpi | PDF | HTML | 2015年 7月 13日 | |
| User guide | CPG005_DRV88xx Evaluation Modules | 2011年 4月 27日 | ||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 2004年 5月 12日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DRV8840EVM — 適用於 DRV8840 的評估模組
The DRV8840 evaluation module consists of a 5.0A, single-H-bridge motor driver with a Phase/Enable control interface and a small number external components that can be used to drive a single brushed DC motor. The on-board MSP430 MCU + software/GUI provides signaling and control and supports PWM (...)
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。