首頁 放大器 可編程與可變增益放大器 (PGA 與 VGA)
首頁
放大器
可編程與可變增益放大器 (PGA 與 VGA)

PGA281

現行

零漂移高電壓可編程增益放大器

立即訂購
產品規格表

PGA281

現行
產品規格表 立即訂購

產品詳細資料

PGA/VGA PGA Number of channels 1 Vs (min) (V) 10 Vs (max) (V) 36 Input type Differential Output type Differential Vos (offset voltage at 25°C) (typ) (mV) 0.0053 Input offset drift (±) (typ) (µV/°C) 0.03 Input voltage noise (typ) (µV√Hz) 0.022 Interface type GPIO Noise at 1 kHz (typ) (V√Hz) 0.00000002 BW at Acl (MHz) 6 Acl, min spec gain (V/V) 0.125 Architecture CMOS Features EMI filtering Slew rate (typ) (V/µs) 1 Iq per channel (typ) (mA) 3.15 Gain (max) (dB) 42 Gain error (typ) (%) 0.03 Gain drift (max) (ppm/°C) 3 Rating Catalog Operating temperature range (°C) -40 to 125
PGA/VGA PGA Number of channels 1 Vs (min) (V) 10 Vs (max) (V) 36 Input type Differential Output type Differential Vos (offset voltage at 25°C) (typ) (mV) 0.0053 Input offset drift (±) (typ) (µV/°C) 0.03 Input voltage noise (typ) (µV√Hz) 0.022 Interface type GPIO Noise at 1 kHz (typ) (V√Hz) 0.00000002 BW at Acl (MHz) 6 Acl, min spec gain (V/V) 0.125 Architecture CMOS Features EMI filtering Slew rate (typ) (V/µs) 1 Iq per channel (typ) (mA) 3.15 Gain (max) (dB) 42 Gain error (typ) (%) 0.03 Gain drift (max) (ppm/°C) 3 Rating Catalog Operating temperature range (°C) -40 to 125
TSSOP (PW) 16 32 mm² 5 x 6.4
  • Wide Input Range: ±15.5 V at ±18 V Supply
  • Binary Gain Steps: 128 V/V to 1/8 V/V
  • Additional Scaling Factor: 1 V/V and 1 3/8 V/V
  • Low Offset Voltage: 5 µV at G = 128
  • Near-Zero Long-Term Drift of Offset Voltage
  • Near-Zero Gain Drift: 0.5 ppm/°C
  • Excellent Linearity: 1.5 ppm
  • Excellent CMRR: 140 dB
  • High Input Impedance
  • Very Low 1/f Noise
  • Differential Signal Output
  • Overload Detection
  • TSSOP-16 Package
  • Wide Input Range: ±15.5 V at ±18 V Supply
  • Binary Gain Steps: 128 V/V to 1/8 V/V
  • Additional Scaling Factor: 1 V/V and 1 3/8 V/V
  • Low Offset Voltage: 5 µV at G = 128
  • Near-Zero Long-Term Drift of Offset Voltage
  • Near-Zero Gain Drift: 0.5 ppm/°C
  • Excellent Linearity: 1.5 ppm
  • Excellent CMRR: 140 dB
  • High Input Impedance
  • Very Low 1/f Noise
  • Differential Signal Output
  • Overload Detection
  • TSSOP-16 Package

The PGA281 is a high-precision instrumentation amplifier with a digitally-controllable gain and signal-integrity test capability. This device uses proprietary autozeroing techniques to offer low offset voltage, near-zero offset and gain drift, excellent linearity, and nearly no 1/f noise.

The PGA281 is optimized to provide an excellent common-mode rejection of greater than 110 dB (G = 1) over a wide frequency range. Superior common-mode and supply rejection supports high-resolution, precise measurement. The 36-V supply capability and wide, high-impedance input range comply with requirements for universal signal measurement.

The PGA281 offers multiple internal gain options from ⅛ V/V (attenuation) to 176 V/V, making this a universal, high-performance, analog front-end suitable for a wide variety of applications. The fully differential, rail-to-rail output is designed to easily interface a wide range of input signals to the low-voltage domain of high-resolution analog-to-digital converters (ADCs).

The PGA281 is available in a TSSOP-16 package and is specified over a temperature range of –40°C to +105°C.

The PGA281 is a high-precision instrumentation amplifier with a digitally-controllable gain and signal-integrity test capability. This device uses proprietary autozeroing techniques to offer low offset voltage, near-zero offset and gain drift, excellent linearity, and nearly no 1/f noise.

The PGA281 is optimized to provide an excellent common-mode rejection of greater than 110 dB (G = 1) over a wide frequency range. Superior common-mode and supply rejection supports high-resolution, precise measurement. The 36-V supply capability and wide, high-impedance input range comply with requirements for universal signal measurement.

The PGA281 offers multiple internal gain options from ⅛ V/V (attenuation) to 176 V/V, making this a universal, high-performance, analog front-end suitable for a wide variety of applications. The fully differential, rail-to-rail output is designed to easily interface a wide range of input signals to the low-voltage domain of high-resolution analog-to-digital converters (ADCs).

The PGA281 is available in a TSSOP-16 package and is specified over a temperature range of –40°C to +105°C.
filter 尋找其它 可編程與可變增益放大器 (PGA 與 VGA)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
PGA280 現行 零漂移、HV 可編程增益放大器 Quad channel alternative
功能與所比較的裝置相似
PGA855 現行 具有低雜訊、寬頻、全差動輸出可編程增益儀器放大器 Higher bandwidth in smaller package

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet Precision, Zero-Drift, High-Voltage, Programmable Gain Instrumentation Amplifier datasheet (Rev. A) 2013年 6月 21日
Analog Design Journal Precision signal conditioning for safety-enabled AIMs in factory automation 2019年 9月 30日
EVM User's guide PGA281EVM User's Guide 2013年 5月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

PGA281EVM — 適用於零漂移、高電壓可編程增益放大器的評估模組

The PGA281EVM provides basic functional evaluation of the PGA281, a high-precision instrumentation amplifier with pin-programmable gain, attenuation, and error detection.

使用指南: PDF
TI.com 無法提供
模擬型號

PGA281 PSpice Model (Rev. B)

SBOM815B.ZIP (135 KB) - PSpice Model
下載
模擬型號

PGA281 TINA-TI Reference Design

SBOM817.TSC (11220 KB) - TINA-TI Reference Design
下載
模擬型號

PGA281 TINA-TI Spice Model

SBOM818.ZIP (15 KB) - TINA-TI Spice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIPD135 — 10uA-100mA、0.05% 錯誤率、高壓端電流感測解決方案參考設計

This precision verified design provides the theory, component selection, simulation, complete PCB schematic and layout, bill of materials, and measured performance of a split-supply, high-side four decade current sensing solution that can accurately detect load currents from 10uA-100mA. The (...)
使用指南: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片