產品詳細資料

Number of input channels 1 Operating temperature range (°C) -40 to 125 Vs (min) (V) 3.5 Vs (max) (V) 30 Interface type SPI, OWI and Voltage output Resolution (Bits) 24 Rating Catalog
Number of input channels 1 Operating temperature range (°C) -40 to 125 Vs (min) (V) 3.5 Vs (max) (V) 30 Interface type SPI, OWI and Voltage output Resolution (Bits) 24 Rating Catalog
HTQFP (PHP) 48 81 mm² 9 x 9
  • Analog features
    • Programmable-gain analog front end for LVDT sensors
    • Excitation waveform generator and amplifier
    • Dual 24-bit ADC with amplitude and phase demodulators
    • 24-bit auxilary ADC
    • On-chip internal temperature sensor
    • 14-bit output DAC with programmable gain
    • Built-in diagnostics
  • Digital features
    • ARM® Cortex®-M0 microcontroller
    • 16KB ferroelectric RAM (FRAM) program memory
    • 2KB general-pupose RAM
    • 512B RAM waveform-generator look-up table
    • 8-MHz on-chip oscillator
  • Peripheral features
    • Serial peripheral interface (SPI)
    • One-wire interface (OWI)
    • Ratiometric and absolute voltage output
  • General features
    • Operational supply range: 3.5 V to 30 V
    • Ambient temperature range: –40°C to +125°C
    • DMOS gate controller for extended supply range >30 V
  • Analog features
    • Programmable-gain analog front end for LVDT sensors
    • Excitation waveform generator and amplifier
    • Dual 24-bit ADC with amplitude and phase demodulators
    • 24-bit auxilary ADC
    • On-chip internal temperature sensor
    • 14-bit output DAC with programmable gain
    • Built-in diagnostics
  • Digital features
    • ARM® Cortex®-M0 microcontroller
    • 16KB ferroelectric RAM (FRAM) program memory
    • 2KB general-pupose RAM
    • 512B RAM waveform-generator look-up table
    • 8-MHz on-chip oscillator
  • Peripheral features
    • Serial peripheral interface (SPI)
    • One-wire interface (OWI)
    • Ratiometric and absolute voltage output
  • General features
    • Operational supply range: 3.5 V to 30 V
    • Ambient temperature range: –40°C to +125°C
    • DMOS gate controller for extended supply range >30 V

The PGA970 is a highly integrated system-on-chip LVDT sensor-signal conditioner with advanced signal-processing capabilities. It contains a three-channel, low-noise, programmable-gain, analog front end that allows direct connection to the sense element, followed by three independent 24-bit delta-sigma ADCs.

Further, the device contains a digital signal-demodulation block that interfaces to an integrated ARM-Cortex M0 MCU, allowing implementation of custom sensor-compensation algorithms stored in the device nonvolatile memory. External system communication is achieved by using any of the SPI, OWI, GPIO, or PWM digital interfaces. Analog output is supported through a 14-bit DAC and programmable-gain amplifier offering reference or absolute-voltage output. Sensing-element excitation is achieved by the use of an integrated waveform generator and waveform amplifier. The waveform signal data is user-defined and stored in a designated RAM memory area.

Besides the primary functional components, the PGA970 is equipped with additional support circuitry. The device diagnostics, sensor diagnostics, and integrated temperature sensor provide protection and information about the integrity of the overall system and sensing element. The device also includes a gate-controller circuit which when used with an external depletion MOSFET can regulate the device supply voltage in systems where the supply voltage exceeds 30 V.

The PGA970 is a highly integrated system-on-chip LVDT sensor-signal conditioner with advanced signal-processing capabilities. It contains a three-channel, low-noise, programmable-gain, analog front end that allows direct connection to the sense element, followed by three independent 24-bit delta-sigma ADCs.

Further, the device contains a digital signal-demodulation block that interfaces to an integrated ARM-Cortex M0 MCU, allowing implementation of custom sensor-compensation algorithms stored in the device nonvolatile memory. External system communication is achieved by using any of the SPI, OWI, GPIO, or PWM digital interfaces. Analog output is supported through a 14-bit DAC and programmable-gain amplifier offering reference or absolute-voltage output. Sensing-element excitation is achieved by the use of an integrated waveform generator and waveform amplifier. The waveform signal data is user-defined and stored in a designated RAM memory area.

Besides the primary functional components, the PGA970 is equipped with additional support circuitry. The device diagnostics, sensor diagnostics, and integrated temperature sensor provide protection and information about the integrity of the overall system and sensing element. The device also includes a gate-controller circuit which when used with an external depletion MOSFET can regulate the device supply voltage in systems where the supply voltage exceeds 30 V.

下載
索取更多資訊

提供完整產品規格表。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet PGA970 LVDT Sensor Signal Conditioner datasheet PDF | HTML 2019年 4月 2日

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​