產品詳細資料

Number of channels 4 Output type Open-collector, Open-drain Propagation delay time (µs) 0.56 Vs (max) (V) 24 Vs (min) (V) 2.2 Rating Space Iq per channel (typ) (mA) 0.055 Vos (offset voltage at 25°C) (max) (mV) 2.5 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 15 VICR (max) (V) 24 VICR (min) (V) 0
Number of channels 4 Output type Open-collector, Open-drain Propagation delay time (µs) 0.56 Vs (max) (V) 24 Vs (min) (V) 2.2 Rating Space Iq per channel (typ) (mA) 0.055 Vos (offset voltage at 25°C) (max) (mV) 2.5 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 15 VICR (max) (V) 24 VICR (min) (V) 0
TSSOP (PW) 14 32 mm² 5 x 6.4
  • VID V62/18613
  • Radiation-Tolerant
    • Single Event Latch-up (SEL) immune to 43MeV-cm2/mg at 125°C
    • ELDRS free to 30krad(Si)
    • Total Ionizing Dose (TID) rlat for every wafer lot up to 30krad(Si)
  • Space enhanced plastic
    • Controlled baseline
    • Gold wire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Supply range: 2.2V to 24V
  • Low quiescent current: 55µA per comparator
  • Input common-mode range includes both rails
  • Low propagation delay: 560ns
  • Low input offset voltage: 300µV
  • Open collector outputs:
    • Up to 24V above negative supply regardless of supply voltage
  • Small packages:
    • Quad: TSSOP-14
  • VID V62/18613
  • Radiation-Tolerant
    • Single Event Latch-up (SEL) immune to 43MeV-cm2/mg at 125°C
    • ELDRS free to 30krad(Si)
    • Total Ionizing Dose (TID) rlat for every wafer lot up to 30krad(Si)
  • Space enhanced plastic
    • Controlled baseline
    • Gold wire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability
    • Enhanced mold compound for low outgassing
  • Supply range: 2.2V to 24V
  • Low quiescent current: 55µA per comparator
  • Input common-mode range includes both rails
  • Low propagation delay: 560ns
  • Low input offset voltage: 300µV
  • Open collector outputs:
    • Up to 24V above negative supply regardless of supply voltage
  • Small packages:
    • Quad: TSSOP-14

The TLV1704-SEP (Quad) device offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in an industry-standard, TSSOP-14 plastic package, making these devices appropriate for applications where size, weight, and design flexibility are important..

The open-collector output offers the advantage of allowing the output to be level shifted to any voltage rail up to 24V above the negative power supply, regardless of the TLV1704-SEP supply voltage. Likewise, the outputs can be wired together to form a single alert signal.

The device is a microPower comparator. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV1704-SEP device well-suited for system diagnostics such as voltage monitoring, current sensing, and zero-cross detection.

The TLV1704-SEP (Quad) device offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in an industry-standard, TSSOP-14 plastic package, making these devices appropriate for applications where size, weight, and design flexibility are important..

The open-collector output offers the advantage of allowing the output to be level shifted to any voltage rail up to 24V above the negative power supply, regardless of the TLV1704-SEP supply voltage. Likewise, the outputs can be wired together to form a single alert signal.

The device is a microPower comparator. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV1704-SEP device well-suited for system diagnostics such as voltage monitoring, current sensing, and zero-cross detection.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 13
類型 標題 日期
* Data sheet TLV1704-SEP 2.2V to 24V, Radiation-Tolerant microPower Quad Comparator in Space Enhanced Plastic datasheet (Rev. B) PDF | HTML 2024年 8月 8日
* Radiation & reliability report TLV1704-SEP Single-Event Effects (SEE) Radiation Report (Rev. A) PDF | HTML 2024年 8月 16日
* Radiation & reliability report TLV1704-SEP Neutron Displacement Damage (NDD) Characterization Report PDF | HTML 2022年 3月 17日
* Radiation & reliability report TLV1704-SEP Production Flow and Reliability Report 2019年 7月 18日
* Radiation & reliability report TLV1704-SEP Radiation Hardened microPower Quad Comparator Plastic TID Report 2018年 11月 11日
Circuit design Comparator with and without hysteresis circuit (Rev. B) PDF | HTML 2024年 10月 15日
Selection guide TI Space Products (Rev. J) 2024年 2月 12日
Technical article 航太級強化產品如何因應低地球軌道應用的挑戰 (Rev. A) PDF | HTML 2024年 1月 11日
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 2022年 9月 15日
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 2022年 3月 7日
Circuit design Space-Grade, 30-krad, High-Side Current Sensing Comparator Circuit PDF | HTML 2021年 4月 8日
Application note Reverse Current Protection Using MOSFET and Comparator to Minimize Power Dissipa 2018年 2月 22日
User guide Universal Operational Amplifier Evaluation Module Selection Guide (Rev. B) 2001年 3月 20日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件,可測試通用運算放大器 (op amp) 參數,並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項,可滿足封裝需求,使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝,包括:

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
開發板

OPAMPEVM-MSOPTSSOP — 採用 MSOP/TSSOP 封裝、適用單路/雙路/四路運算放大器且有/無關斷狀態的通用 EVM

The OPAMPEVM-MSOPTSSOP is a general purpose blank circuit board that simplifies evaluation of surface-mount op amps. The evaluation module board design allows many different circuits to be constructed easily and quickly. The board has three separate circuit development areas that can be snapped (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TLV1704-SEP TINA-TI High-Side Current Sensing Reference Design

SBOMBL5.ZIP (4 KB) - TINA-TI Reference Design
模擬型號

TLV170x and TLV170x-Q1 PSpice Model (Rev. C)

SBOM859C.ZIP (91 KB) - PSpice Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 14 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片