首頁 放大器 比較器
首頁
放大器
比較器

TXS03121

現行

奈米功率單比較器

立即訂購
產品規格表

TXS03121

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Output type Open-collector, Open-drain Propagation delay time (µs) 0.7 Vs (max) (V) 5.5 Vs (min) (V) 2.5 Rating Catalog Iq per channel (typ) (mA) 0.005 Vos (offset voltage at 25°C) (max) (mV) 10 Rail-to-rail In to V- Operating temperature range (°C) -40 to 85 Input bias current (±) (max) (nA) 500 VICR (max) (V) 5.5 VICR (min) (V) 0.8
Number of channels 1 Output type Open-collector, Open-drain Propagation delay time (µs) 0.7 Vs (max) (V) 5.5 Vs (min) (V) 2.5 Rating Catalog Iq per channel (typ) (mA) 0.005 Vos (offset voltage at 25°C) (max) (mV) 10 Rail-to-rail In to V- Operating temperature range (°C) -40 to 85 Input bias current (±) (max) (nA) 500 VICR (max) (V) 5.5 VICR (min) (V) 0.8
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • Low Supply Current: 8 µA (Max)
  • Supply Voltage: 2.5 V to 5.5 V
  • Output FET Provides Down Translation
  • Small Package: SOT-563
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance
    • 2500-V Human-Body Model (JESD-A114E)
    • 250-V Machine Model
      (EIA/JESD A115-A)
    • 1500-V Charged-Device Model (JESD22-C101-A Level III)
  • Low Supply Current: 8 µA (Max)
  • Supply Voltage: 2.5 V to 5.5 V
  • Output FET Provides Down Translation
  • Small Package: SOT-563
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance
    • 2500-V Human-Body Model (JESD-A114E)
    • 250-V Machine Model
      (EIA/JESD A115-A)
    • 1500-V Charged-Device Model (JESD22-C101-A Level III)

The TXS03121 is a comparator designed for battery monitoring applications. It can be operated with a voltage of 2.5 V to 5.5 V. The reference voltage is applied to the –IN terminal, whereas the voltage to be monitored is connected to +IN. When the voltage at +IN is greater than the voltage at –IN, the output FET is turned On. When the voltage at +IN is less than the voltage at –IN, the output FET is turned Off. The source (S) of the output FET can be connected to 1.1 V to 3.6 V, which allows the output signal to be level translated to another voltage value. The voltage at V+ must be greater than or equal to the voltage at S. The voltage at S must be greater than or equal to the voltage at D (V+ ≥ VS ≥ VD).

The TXS03121 is a comparator designed for battery monitoring applications. It can be operated with a voltage of 2.5 V to 5.5 V. The reference voltage is applied to the –IN terminal, whereas the voltage to be monitored is connected to +IN. When the voltage at +IN is greater than the voltage at –IN, the output FET is turned On. When the voltage at +IN is less than the voltage at –IN, the output FET is turned Off. The source (S) of the output FET can be connected to 1.1 V to 3.6 V, which allows the output signal to be level translated to another voltage value. The voltage at V+ must be greater than or equal to the voltage at S. The voltage at S must be greater than or equal to the voltage at D (V+ ≥ VS ≥ VD).
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet Comparator With Output Voltage-Level Translation datasheet (Rev. A) 2009年 1月 6日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片