Startseite Taktgeber & Timing Oscillators
Startseite
Taktgeber & Timing
Oscillators
NEU

CDC6C

AKTIV

Low-power, low-jitter, bulk-acoustic-wave (BAW), fixed-frequency LVCMOS oscillator

Jetzt bestellen
Datenblatt

CDC6C

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Output frequency (MHz) 25 Output type LVCMOS Stability (ppm) ±50 Supply voltage (V) 1.8, 2.5, 3.3 Jitter (ps) 0.1 Operating temperature range (°C) -40 to 105
Output frequency (MHz) 25 Output type LVCMOS Stability (ppm) ±50 Supply voltage (V) 1.8, 2.5, 3.3 Jitter (ps) 0.1 Operating temperature range (°C) -40 to 105
VSON (DLE) 4 8 mm² 3.2 x 2.5 VSON (DLF) 4 5 mm² 2.5 x 2 VSON (DLY) 4 1.92 mm² 1.6 x 1.2
  • LVCMOS output Oscillator supporting frequency range from 250kHz to 200MHz
  • ±50ppm total frequency stability inclusive of all factors and including 10 years aging
  • Supply Voltage supports 1.8V to 3.3V ±10%.
  • Very low power consumption: 4.57mA typical and 7.4mA maximum for 25MHz
  • Stand by current 2µA typical helps for battery powered applications
  • Low jitter: < 1ps RMS jitter for Fout ≥ 10MHz
  • Smallest industry standard package: 1.60mm × 1.2mm (DLY), 2.00mm × 1.60mm (DLX), 2.50mm × 2.00mm (DLF), 3.20mm × 2.5mm (DLE)
  • Operating temperature range of -40°C to +105°C
  • Integrated LDO for robust supply noise immunity
  • Start up time < 3ms
    • Contact TI for different start-up times.
  • Orderable options for slow rise and fall time for EMI reduction
  • Contact TI representative for any frequency and samples needed.
  • LVCMOS output Oscillator supporting frequency range from 250kHz to 200MHz
  • ±50ppm total frequency stability inclusive of all factors and including 10 years aging
  • Supply Voltage supports 1.8V to 3.3V ±10%.
  • Very low power consumption: 4.57mA typical and 7.4mA maximum for 25MHz
  • Stand by current 2µA typical helps for battery powered applications
  • Low jitter: < 1ps RMS jitter for Fout ≥ 10MHz
  • Smallest industry standard package: 1.60mm × 1.2mm (DLY), 2.00mm × 1.60mm (DLX), 2.50mm × 2.00mm (DLF), 3.20mm × 2.5mm (DLE)
  • Operating temperature range of -40°C to +105°C
  • Integrated LDO for robust supply noise immunity
  • Start up time < 3ms
    • Contact TI for different start-up times.
  • Orderable options for slow rise and fall time for EMI reduction
  • Contact TI representative for any frequency and samples needed.

Texas Instruments’ high-precision Bulk-Acoustic Wave (BAW) micro-resonator technology is integrated directly into a package allowing for low jitter clock circuitry. BAW is fully designed and manufactured at TI factories like other silicon-based fabrication processes.

The CDC6Cx device is a low jitter, low power, fixed-frequency oscillator which incorporates the BAW as the resonator source. The device is factory-programmed per specific frequency and function pin. With a Frequency control logic and output frequency divider, the CDC6Cx is capable of producing any frequency within the specified range providing a single device family for all frequency needs.

The high-performance clocking, mechanical stability, lower power consumption and small package options for this device are designed for reference clock and core clocks in Industrial, Telecom, Data and Enterprise Network and Personal Electronics end equipments.

Texas Instruments’ high-precision Bulk-Acoustic Wave (BAW) micro-resonator technology is integrated directly into a package allowing for low jitter clock circuitry. BAW is fully designed and manufactured at TI factories like other silicon-based fabrication processes.

The CDC6Cx device is a low jitter, low power, fixed-frequency oscillator which incorporates the BAW as the resonator source. The device is factory-programmed per specific frequency and function pin. With a Frequency control logic and output frequency divider, the CDC6Cx is capable of producing any frequency within the specified range providing a single device family for all frequency needs.

The high-performance clocking, mechanical stability, lower power consumption and small package options for this device are designed for reference clock and core clocks in Industrial, Telecom, Data and Enterprise Network and Personal Electronics end equipments.
filter Andere Oscillators suchen
Herunterladen Video mit Transkript ansehen Video
Weitere Informationen anfordern

Muster sind verfügbar. Jetzt anfordern

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet CDC6Cx Low Power LVCMOS output BAW Oscillator datasheet PDF | HTML 06 Dez 2024
Application note CDC6Cx OPN Decoder PDF | HTML 02 Dez 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

CDC6CEVM — CDC6C evaluation module

The CDC6EVM provides a complete platform to evaluate the clock performance and flexibility of the CDC6C low-power LVCMOS BAW oscillator family. This evaluation module can be used as a flexible clock source for compliance testing, performance evaluation and initial system prototyping. The onboard (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSON (DLE) 4 Ultra Librarian
VSON (DLF) 4 Ultra Librarian
VSON (DLY) 4 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos