Startseite Sensoren Spezialsensoren Ultraschallsensor-AFEs
Startseite
Sensoren
Spezialsensoren
Ultraschallsensor-AFEs

TUSS4470

AKTIV

Ultraschallsensor-IC mit Direktantrieb und logarithmischem Verstärker

Jetzt bestellen
Datenblatt

TUSS4470

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Type Analog front-end (AFE) Features Direct drive Gain (min) (dB) 19 Gain (max) (dB) 113 Number of input channels 1 Supply voltage (min) (V) 5 Supply voltage (max) (V) 36 Operating temperature range (°C) -25 to 105 Interface type SPI Rating Catalog
Type Analog front-end (AFE) Features Direct drive Gain (min) (dB) 19 Gain (max) (dB) 113 Number of input channels 1 Supply voltage (min) (V) 5 Supply voltage (max) (V) 36 Operating temperature range (°C) -25 to 105 Interface type SPI Rating Catalog
WQFN (RTJ) 20 16 mm² 4 x 4
  • Integrated driver for directly driving transducers and receiver stage with analog output for ultrasound applications
  • 86-dB input dynamic range analog front-end
    • First stage low noise amplifier adjustable to 10, 12.5, 15 and 20 V/V
    • Configurable bandpass filter from 40 KHz to 500 KHz
    • Wide-band logarithmic amplifier
  • Supported transducer frequencies (controlled by external clock)
    • 40 KHz to 1 MHz
    • Pre-driver mode: 40 KHz to 440 KHz
  • For low-power applications
    • Standby mode: 1.7 mA (typical)
    • Sleep mode: 220 µA (typical)
  • Configurable drive stage:
    • Direct drive using internal H-Bridge for transducer excitation
    • Pre-driver configuration to use internal H-bridge to drive external Field Effect Transistors (FETs) for higher current drive
    • Configurable burst patterns using IO1 and IO2 pins
  • Outputs:
    • Voltage output of the demodulated echo envelope on VOUT
    • Input signal zero crossing comparator output on OUT3 pin
    • Programmable VOUT threshold crossing on OUT4 pin
  • Serial Peripheral Interface (SPI) for configuration by microcontroller (MCU)
  • Integrated driver for directly driving transducers and receiver stage with analog output for ultrasound applications
  • 86-dB input dynamic range analog front-end
    • First stage low noise amplifier adjustable to 10, 12.5, 15 and 20 V/V
    • Configurable bandpass filter from 40 KHz to 500 KHz
    • Wide-band logarithmic amplifier
  • Supported transducer frequencies (controlled by external clock)
    • 40 KHz to 1 MHz
    • Pre-driver mode: 40 KHz to 440 KHz
  • For low-power applications
    • Standby mode: 1.7 mA (typical)
    • Sleep mode: 220 µA (typical)
  • Configurable drive stage:
    • Direct drive using internal H-Bridge for transducer excitation
    • Pre-driver configuration to use internal H-bridge to drive external Field Effect Transistors (FETs) for higher current drive
    • Configurable burst patterns using IO1 and IO2 pins
  • Outputs:
    • Voltage output of the demodulated echo envelope on VOUT
    • Input signal zero crossing comparator output on OUT3 pin
    • Programmable VOUT threshold crossing on OUT4 pin
  • Serial Peripheral Interface (SPI) for configuration by microcontroller (MCU)

The TUSS4470 is a highly integrated direct drive analog front end for industrial ultrasonic applications. The transducer drive stage is an internal H-bridge that can be configured to drive the transducer in direct-drive mode to achieve maximum voltage across the transducer. The internal H-bridge can also be configured as a pre-driver for external FETs, enabling higher current and voltage drive for larger transducers.

The receive signal path includes a low-noise linear amplifier, a bandpass filter, followed by a logarithmic gain amplifier for input dependent amplification. The logarithmic amplifier allows for high sensitivity for weak echo signals and offers excellent input dynamic range over full range of reflected echoes.

The drivers can be controlled directly through the microcontroller for complete customization of the burst signal, or can be programmed through SPI with a customizable burst length. The TUSS4470 can support a single transducer to send and receive burst signals, or can set up two transducers to split the send and receive functions.

The TUSS4470 is a highly integrated direct drive analog front end for industrial ultrasonic applications. The transducer drive stage is an internal H-bridge that can be configured to drive the transducer in direct-drive mode to achieve maximum voltage across the transducer. The internal H-bridge can also be configured as a pre-driver for external FETs, enabling higher current and voltage drive for larger transducers.

The receive signal path includes a low-noise linear amplifier, a bandpass filter, followed by a logarithmic gain amplifier for input dependent amplification. The logarithmic amplifier allows for high sensitivity for weak echo signals and offers excellent input dynamic range over full range of reflected echoes.

The drivers can be controlled directly through the microcontroller for complete customization of the burst signal, or can be programmed through SPI with a customizable burst length. The TUSS4470 can support a single transducer to send and receive burst signals, or can set up two transducers to split the send and receive functions.
filter Andere Ultraschallsensor-AFEs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 8
Typ Titel Datum
* Data sheet TUSS4470 Transformer Drive Ultrasonic Sensor IC With Logarithmic Amplifier datasheet (Rev. A) PDF | HTML 19 Mai 2022
Application note Ultrasonic Sensing Basics (Rev. D) PDF | HTML 02 Dez 2021
Application note Ultrasonic Application Optimization and Usage Guide: TUSS4470 and TDC1000 PDF | HTML 18 Jan 2021
Technical article Shrink your solution size with transformer-less ultrasonic ICs PDF | HTML 15 Jun 2020
User guide TUSS44x0 EVM for Ultrasonic Sensors User's Guide (Rev. A) 02 Apr 2020
E-book Ein Techniker-Leitfaden für Industrieroboter-Designs 25 Mär 2020
Application note TUSS44x0 Software Development Guide PDF | HTML 17 Mär 2020
Application note Logarithmic Amplifier for Ultrasonic Sensor Signal Conditioning 13 Mär 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

BOOSTXL-TUSS4470 — TUSS4470-Ultraschallwandler mit Direktantrieb und LDO-Evaluierungsmodul

The TUSS4470 EVM is a collective of the BOOSTXL-TUSS4470 and MSP-EXP430F5529LP, which enables users to fully evaluate the TUSS4470 ultrasonic sensor signal conditioner and H-bridge driver. Transducer compatibility is expanded to open- or closed-top transducers operating between 30 to 1000 kHz. The (...)
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Support-Software

SLDC021 — TUSS Generation III EVM GUI

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Ultraschallsensor-AFEs
TUSS4440 — Ultraschallsensor-IC zur Transformatorsteuerung mit logarithmischem Verstärker TUSS4470 — Ultraschallsensor-IC mit Direktantrieb und logarithmischem Verstärker
Hardware-Entwicklung
Evaluierungsplatine
BOOSTXL-TUSS4440 — TUSS4440 Transformator-gesteuerter Ultraschallwandler mit LDO – Evaluierungsmodul BOOSTXL-TUSS4470 — TUSS4470-Ultraschallwandler mit Direktantrieb und LDO-Evaluierungsmodul
Herunterladen
Support-Software

SLDC023 — TUSS44x0 Energia Library and Code Example

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Ultraschallsensor-AFEs
TUSS4440 — Ultraschallsensor-IC zur Transformatorsteuerung mit logarithmischem Verstärker TUSS4470 — Ultraschallsensor-IC mit Direktantrieb und logarithmischem Verstärker
Herunterladen
Gerberdatei

PGA460 Transducer and Transformer Listing

SLAC787.ZIP (21 KB)
Herunterladen
Gerberdatei

Direct-Drive Ultrasonic Proximity Sensing Module Design Files (TUSS4470PSM)

SLDC022.ZIP (4425 KB)
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN (RTJ) 20 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos