DRV2605L-Q1

ACTIVO

Controlador háptico automotriz para ERM/LRA con funcionamiento de 2 V, biblioteca de forma de onda y

Detalles del producto

Haptic actuator type ERM, LRA Features Integrated haptic effects, Smart loop Input signal Analog, I2C, PWM Vs (min) (V) 2 Vs (max) (V) 5.2 Vout (max) (V) 5.5 Peak-to-peak output voltage (max) (V) 10.4 Iq (typ) (mA) 0.5 Shutdown current (ISD) (µA) 4 Startup time (ms) 0.7 Operating temperature range (°C) -40 to 105 Rating Automotive
Haptic actuator type ERM, LRA Features Integrated haptic effects, Smart loop Input signal Analog, I2C, PWM Vs (min) (V) 2 Vs (max) (V) 5.2 Vout (max) (V) 5.5 Peak-to-peak output voltage (max) (V) 10.4 Iq (typ) (mA) 0.5 Shutdown current (ISD) (µA) 4 Startup time (ms) 0.7 Operating temperature range (°C) -40 to 105 Rating Automotive
VSSOP (DGS) 10 14.7 mm² 3 x 4.9
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 2: –40°C to 105°C
    • Device HBM ESD Classification Level 1B
    • Device CDM ESD Classification Level C6
  • Flexible Haptic and Vibration Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • I2C-Controlled Digital Playback Engine
    • Waveform Sequencer and Trigger
    • Real-Time Playback Mode through I2C
    • I2C Dual-Mode Drive (Open and Closed Loop)
  • Smart-Loop Architecture (Patent Pending Control Algorithm)
    • Automatic Overdrive and Braking
    • Automatic Resonance Tracking and Reporting (LRA Only)
    • Automatic Actuator Diagnostic
    • Automatic Level Calibration
    • Wide Support for Actuator Models
  • Licensed Immersion TouchSense® 2200 Features:
    • Integrated Immersion Effect Library
    • Audio-to-Vibe
  • Drive Compensation Over Battery Discharge
  • Wide Voltage Operation (2 V to 5.2 V)
  • Efficient Differential Switching Output Drive
  • PWM Input with 0% to 100% Duty-Cycle Control Range
  • Hardware Trigger Input
  • Fast Startup Time
  • 1.8-V Compatible, VDD-Tolerant Digital Interface
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified with the Following Results:
    • Device Temperature Grade 2: –40°C to 105°C
    • Device HBM ESD Classification Level 1B
    • Device CDM ESD Classification Level C6
  • Flexible Haptic and Vibration Driver
    • LRA (Linear Resonance Actuator)
    • ERM (Eccentric Rotating Mass)
  • I2C-Controlled Digital Playback Engine
    • Waveform Sequencer and Trigger
    • Real-Time Playback Mode through I2C
    • I2C Dual-Mode Drive (Open and Closed Loop)
  • Smart-Loop Architecture (Patent Pending Control Algorithm)
    • Automatic Overdrive and Braking
    • Automatic Resonance Tracking and Reporting (LRA Only)
    • Automatic Actuator Diagnostic
    • Automatic Level Calibration
    • Wide Support for Actuator Models
  • Licensed Immersion TouchSense® 2200 Features:
    • Integrated Immersion Effect Library
    • Audio-to-Vibe
  • Drive Compensation Over Battery Discharge
  • Wide Voltage Operation (2 V to 5.2 V)
  • Efficient Differential Switching Output Drive
  • PWM Input with 0% to 100% Duty-Cycle Control Range
  • Hardware Trigger Input
  • Fast Startup Time
  • 1.8-V Compatible, VDD-Tolerant Digital Interface

The DRV2605L-Q1 device is an automotive haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2605L-Q1 device offers a licensed version of TouchSense 2200 software from Immersion which eliminates the requirement to design haptic waveforms because the software includes over 100 licensed effects (6 ERM libraries and 1 LRA library) and audio-to-vibe features.

Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.

The smart-loop architecture inside the DRV2605L-Q1 device allows simple auto-resonant drive for the LRA as well as feedback-optimized ERM drive allowing for automatic overdrive and braking. The smart-loop architecture creates a simplified input waveform interface as well as reliable motor control and consistent motor performance. The DRV2605L-Q1 also allows for open-loop driving through the use of internally-generated PWM. Additionally, the audio-to-vibe mode automatically converts an audio input signal to meaningful tactile effects.

For an important notice regarding Immersion software, see the Legal Notice section.

The DRV2605L-Q1 device is an automotive haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2605L-Q1 device offers a licensed version of TouchSense 2200 software from Immersion which eliminates the requirement to design haptic waveforms because the software includes over 100 licensed effects (6 ERM libraries and 1 LRA library) and audio-to-vibe features.

Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.

The smart-loop architecture inside the DRV2605L-Q1 device allows simple auto-resonant drive for the LRA as well as feedback-optimized ERM drive allowing for automatic overdrive and braking. The smart-loop architecture creates a simplified input waveform interface as well as reliable motor control and consistent motor performance. The DRV2605L-Q1 also allows for open-loop driving through the use of internally-generated PWM. Additionally, the audio-to-vibe mode automatically converts an audio input signal to meaningful tactile effects.

For an important notice regarding Immersion software, see the Legal Notice section.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
DRV2605L ACTIVO Controlador háptico para ERM/LRA con funcionamiento de 2 V, biblioteca de forma de onda y seguimient Catalog version

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Tipo Título Fecha
* Data sheet DRV2605L-Q1 Automotive Haptic Driver for LRA and ERM With Effect Library and Sma datasheet (Rev. B) 23 abr 2018
Application note Benefits of Auto-Resonance Tracking (Rev. A) PDF | HTML 11 nov 2021
Application note Haptic Energy Consumption (Rev. A) PDF | HTML 28 sep 2021
Application note Piezo Haptics With Integrated Waveforms: DRV2605L-Q1 and DRV2700 27 sep 2017
Technical article Four tech trends that improve the driver experience PDF | HTML 06 ene 2017
User guide DRV2605L Multi-Driver ERM, LRA Haptics Evaluation Kit 17 nov 2014
Application note LRA Actuators: How to Move Them? 03 nov 2014
User guide DRV2605LDGS Haptic Driver Mini Board 13 ago 2014
User guide DRV2605L ERM and LRA Haptic Driver Evaluation Kit (Rev. A) 10 jun 2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV2605LDGSEVM-M — Tablero de desconexión con algoritmo de bucle inteligente háptico y biblioteca de efectos TouchSense

The DRV2605LDGSEVM-M is a 16.33x8.97mm breakout board for the DRV2605L Haptic Driver in MSOP package. It contains the DRV2605L with Smart Loop Algorithm, embedded TouchSense 2200(TM) effects library licensed from Immersion, and adds extended actuator support for Eccentric Rotating Mass (ERM) and (...)

Guía del usuario: PDF
Placa de evaluación

DRV2605LEVM-CT — Kit de evaluación de hápticos ERM y LRA DRV2605L

The DRV2605LEVM-CT is a complete reference design for the DRV2605L ERM and LRA haptics driver.  It contains the DRV2605L with Smart Loop Algorithm, embedded TouchSense 2200 effects library licensed from Immersion, and adds extended actuator support for ERMs and LRAs.  The board includes (...)

Guía del usuario: PDF
Diseños de referencia

TIDA-00314 — Diseño de referencia de botones táctiles metálicos con retroalimentación háptica integrada

This reference design uses our inductance-to-digital converter technology to provide a high-precision method to sense button presses on a metal surface and our haptic drivers provide high-quality haptics feedback to the user. TIDA-00314 demonstrates techniques for system design, environmental (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VSSOP (DGS) 10 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos