DRV81004-Q1

ACTIVO

Controlador de lado bajo de 4 canales y 40 V, con 470 mA por canal, con función de retorno de emerge

Detalles del producto

Control interface SPI Control mode PWM Features Limp home, Open-Load Detection, Paralleling of outputs, Reverse Battery Protection Iout/ch (max) (A) 0.4 Number of channels 4 RDS(on) (Ω) 1 Sleep current (mA) 0.005 Vs (min) (V) 3 Vs ABS (max) (V) 40 Operating temperature range (°C) -40 to 125 Rating Automotive
Control interface SPI Control mode PWM Features Limp home, Open-Load Detection, Paralleling of outputs, Reverse Battery Protection Iout/ch (max) (A) 0.4 Number of channels 4 RDS(on) (Ω) 1 Sleep current (mA) 0.005 Vs (min) (V) 3 Vs ABS (max) (V) 40 Operating temperature range (°C) -40 to 125 Rating Automotive
HTSSOP (PWP) 14 32 mm² 5 x 6.4
  • 3V to 40V Analog supply voltage
    • Cranking capability down to 3V
    • Supports LV124 standard
  • 3V to 5.5V Digital supply voltage
    • Compatible with 3.3V and 5V microcontrollers
  • 44V minimum drain to source clamping voltage
  • RDS(ON): 630mΩ typical at 12V, 25 °C

  • Current: 470mA per output at 85 °C, with all channels ON

  • 2 parallel inputs with mapping functionality

  • Fail-safe activation in Limp Home mode

    • Using nSLEEP and IN pins

  • Low-current sleep mode

    • < 3µA using nSLEEP pin

  • 16-bit SPI interface for control and diagnosis

    • Daisy Chain capability

    • Compatible with 8-bit SPI devices

  • Supports various protection features -

    • Reverse battery protection

    • Short circuit to ground and battery protection

    • Stable behavior at under voltage conditions

    • Over Current latch OFF

    • Overtemperature warning

    • Thermal shutdown latch OFF

    • Overvoltage protection

    • Loss of battery and loss of ground protection

    • Electrostatic discharge (ESD) protection

  • Supports several diagnostic features -

    • Diagnostic information via SPI register

    • Over Load detection in ON state

    • Open Load detection in OFF state

    • Input and Output Status Monitor

  • 3V to 40V Analog supply voltage
    • Cranking capability down to 3V
    • Supports LV124 standard
  • 3V to 5.5V Digital supply voltage
    • Compatible with 3.3V and 5V microcontrollers
  • 44V minimum drain to source clamping voltage
  • RDS(ON): 630mΩ typical at 12V, 25 °C

  • Current: 470mA per output at 85 °C, with all channels ON

  • 2 parallel inputs with mapping functionality

  • Fail-safe activation in Limp Home mode

    • Using nSLEEP and IN pins

  • Low-current sleep mode

    • < 3µA using nSLEEP pin

  • 16-bit SPI interface for control and diagnosis

    • Daisy Chain capability

    • Compatible with 8-bit SPI devices

  • Supports various protection features -

    • Reverse battery protection

    • Short circuit to ground and battery protection

    • Stable behavior at under voltage conditions

    • Over Current latch OFF

    • Overtemperature warning

    • Thermal shutdown latch OFF

    • Overvoltage protection

    • Loss of battery and loss of ground protection

    • Electrostatic discharge (ESD) protection

  • Supports several diagnostic features -

    • Diagnostic information via SPI register

    • Over Load detection in ON state

    • Open Load detection in OFF state

    • Input and Output Status Monitor

The DRV81004-Q1 is a four channel low-side driver with integrated protection and diagnostic features. The device is specially designed to control relays in automotive and industrial applications.

A serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct PWM control of the outputs. The device supports Limp Home mode for fail-safe activation.

Each low-side switch of the DRV81004-Q1 has 630mΩ ON resistance. The device can support 470mA current per output when all the eight channels are ON simultaneously. Integrated clamp circuits on each output dissipates the stored energy when turning OFF inductive loads.

The DRV81004-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81004-Q1 an excellent choice for automotive body and powertrain applications.

The DRV81004-Q1 is a four channel low-side driver with integrated protection and diagnostic features. The device is specially designed to control relays in automotive and industrial applications.

A serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct PWM control of the outputs. The device supports Limp Home mode for fail-safe activation.

Each low-side switch of the DRV81004-Q1 has 630mΩ ON resistance. The device can support 470mA current per output when all the eight channels are ON simultaneously. Integrated clamp circuits on each output dissipates the stored energy when turning OFF inductive loads.

The DRV81004-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81004-Q1 an excellent choice for automotive body and powertrain applications.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
NUEVO DRV81008-Q1 ACTIVO Controlador de lado bajo de 8 canales y 40 V, con 330 mA por canal, con función de retorno de emerge Eight channel low side driver with 330mA/channel.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet DRV81004-Q1: 4-channel Low-side Driver for Relay Control datasheet PDF | HTML 22 ago 2024
EVM User's guide DRV81xxx-Q1 Evaluation Module User's Guide PDF | HTML 22 jul 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV81004-Q1EVM — Módulo de evaluación DRV81004-Q1

El módulo de evaluación (EVM) DRV81xxx-Q1 permite una evaluación sencilla de la familia de dispositivos DRV81xxx-Q1. El EVM se programó y configuró para que funcionara desde el primer momento y empezar a accionar las cargas de inmediato. La familia de dispositivos DRV81xxx-Q1 posee varios (...)
Guía del usuario: PDF | HTML
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 14 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos