DRV8262-Q1

ACTIVO

Controlador de motor de puente en H simple o doble de 70 V y 20 A para automoción con detección de c

Detalles del producto

Number of full bridges 2 Vs (min) (V) 4.5 Vs ABS (max) (V) 70 Peak output current (A) 10 RDS(ON) (HS + LS) (mΩ) 100 Sleep current (µA) 2 Control mode PH/EN, PWM Control interface Hardware (GPIO) Features Current Regulation, Current sense Amplifier, Integrated Current Sensing, Low-Power Sleep Mode Rating Automotive Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 4.5 Vs ABS (max) (V) 70 Peak output current (A) 10 RDS(ON) (HS + LS) (mΩ) 100 Sleep current (µA) 2 Control mode PH/EN, PWM Control interface Hardware (GPIO) Features Current Regulation, Current sense Amplifier, Integrated Current Sensing, Low-Power Sleep Mode Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (DDW) 44 113.4 mm² 14 x 8.1
  • AEC-Q100 Qualified for Automotive
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
    • Single or dual H-bridge motor driver
    • Drives One or two brushed-DC motors
    • One stepper motor
    • One or two thermoelectric coolers (TEC)
  • 4.5V to 60V operating supply voltage range
  • Low RDS(ON):
    • 100mΩ HS + LS (Dual H-Bridge)
    • 50mΩ HS + LS (Single H-Bridge)
  • High output current capability:
    • Dual H-Bridge (24V, 25 °C): 8A peak
    • Single H-Bridge (24V, 25 °C): 16A peak
  • Programmable interface of operation -

    • Phase/Enable (PH/EN)

    • PWM (IN/IN)

  • Integrated current sense and regulation
    • Current sensing for high-side MOSFETs
    • Sense output (IPROPI) for each H-bridge
    • ± 4 % sense accuracy at maximum current
  • Separate logic supply voltage (VCC)
  • Configurable off-Time PWM chopping
    • 7, 16, 24 or 32µs
  • Programmable fault recovery method

  • Supports 1.8V, 3.3V, 5.0V logic inputs
  • Low-current sleep mode (3µA)
  • Protection features
    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)
    • Fault condition output (nFAULT)
  • AEC-Q100 Qualified for Automotive
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
    • Single or dual H-bridge motor driver
    • Drives One or two brushed-DC motors
    • One stepper motor
    • One or two thermoelectric coolers (TEC)
  • 4.5V to 60V operating supply voltage range
  • Low RDS(ON):
    • 100mΩ HS + LS (Dual H-Bridge)
    • 50mΩ HS + LS (Single H-Bridge)
  • High output current capability:
    • Dual H-Bridge (24V, 25 °C): 8A peak
    • Single H-Bridge (24V, 25 °C): 16A peak
  • Programmable interface of operation -

    • Phase/Enable (PH/EN)

    • PWM (IN/IN)

  • Integrated current sense and regulation
    • Current sensing for high-side MOSFETs
    • Sense output (IPROPI) for each H-bridge
    • ± 4 % sense accuracy at maximum current
  • Separate logic supply voltage (VCC)
  • Configurable off-Time PWM chopping
    • 7, 16, 24 or 32µs
  • Programmable fault recovery method

  • Supports 1.8V, 3.3V, 5.0V logic inputs
  • Low-current sleep mode (3µA)
  • Protection features
    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)
    • Fault condition output (nFAULT)

The DRV8262-Q1 is a wide-voltage, high-power, H-bridge motor driver for 24V and 48V automotive applications. The device integrates two H-bridges to drive one or two DC motors or a bipolar stepper motor. The DRV8262-Q1 supports up to 8A peak current in the dual H-bridge mode and up to 16A peak current in the single H-bridge mode. The device also integrates current sensing and regulation, current sense output and protection circuitry.

Integrated current sensing across the high-side MOSFETs allows the driver to regulate the motor current during startup and high load events. A current limit can be set with an adjustable external voltage reference. The device also provides output current proportional to the motor current for each H-bridge. Integrated sensing removes the need for shunt resistors, reducing board area and system cost.

A low-power sleep mode is provided to achieve ultra- low quiescent current. Internal protection features are provided for supply undervoltage lockout (UVLO), charge pump undervoltage (CPUV), output over current (OCP), and device overtemperature (OTSD).

The DRV8262-Q1 is a wide-voltage, high-power, H-bridge motor driver for 24V and 48V automotive applications. The device integrates two H-bridges to drive one or two DC motors or a bipolar stepper motor. The DRV8262-Q1 supports up to 8A peak current in the dual H-bridge mode and up to 16A peak current in the single H-bridge mode. The device also integrates current sensing and regulation, current sense output and protection circuitry.

Integrated current sensing across the high-side MOSFETs allows the driver to regulate the motor current during startup and high load events. A current limit can be set with an adjustable external voltage reference. The device also provides output current proportional to the motor current for each H-bridge. Integrated sensing removes the need for shunt resistors, reducing board area and system cost.

A low-power sleep mode is provided to achieve ultra- low quiescent current. Internal protection features are provided for supply undervoltage lockout (UVLO), charge pump undervoltage (CPUV), output over current (OCP), and device overtemperature (OTSD).

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet DRV8262-Q1 : 60V, Single or Dual H-Bridge Motor Driver with Current Sense Output for 24V and 48V Automotive Applications datasheet PDF | HTML 29 mar 2023
Functional safety information DRV8262-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 16 feb 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8262EVM — Módulo de evaluación DRV8262 para controlador de motor de puente H simple o doble en encapsulado DDW

El módulo de evaluación DRV8262EVM muestra las características y el rendimiento del DRV8262DDWR. Integra dos puentes H para accionar dos motores de corriente continua o un motor paso a paso bipolar. Los dos puentes H se pueden conectar en paralelo para impulsar un motor de CC con una corriente más (...)

Guía del usuario: PDF | HTML
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (DDW) 44 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos