LMH9226

ACTIVO

Controlador ADC de 2.3 GHz-2.9 GHz, de extremo único a diferencial y baja potencia con balun integra

alarmNotificaciones Haga su pedido ahora

Detalles del producto

Current consumption (mA) 83 Frequency (min) (MHz) 2300 Frequency (max) (MHz) 2900 Gain (typ) (dB) 17 Noise figure (typ) (dB) 3 OIP3 (typ) (dBm) 35 P1dB (typ) (dBm) 17.5 Frequency of harmonic distortion measurement (GHz) 2.6 Number of channels 1 Operating temperature range (°C) -40 to 105 Type Active Balun Rating Catalog
Current consumption (mA) 83 Frequency (min) (MHz) 2300 Frequency (max) (MHz) 2900 Gain (typ) (dB) 17 Noise figure (typ) (dB) 3 OIP3 (typ) (dBm) 35 P1dB (typ) (dBm) 17.5 Frequency of harmonic distortion measurement (GHz) 2.6 Number of channels 1 Operating temperature range (°C) -40 to 105 Type Active Balun Rating Catalog
WQFN (RRL) 12 4 mm² 2 x 2
  • Single-channel, single-ended input to differential output RF gain block amplifier
  • Supports 2.6-GHz center frequency with
    400-MHz, 1-dB bandwidth
  • 17-dB typical gain across the 1-dB bandwidth into ZLOAD = 50 Ω
  • Noise figure < 3 dB in 1-dB bandwidth
  • 35-dBm OIP3 at 2-dBm two-tone output power into ZLOAD = 50 Ω
  • 17.5-dBm output P1dB into ZLOAD = 50 Ω
  • 275-mW power consumption on 3.3-V single supply
  • Up to TA = 105°C operating temperature
  • Single-channel, single-ended input to differential output RF gain block amplifier
  • Supports 2.6-GHz center frequency with
    400-MHz, 1-dB bandwidth
  • 17-dB typical gain across the 1-dB bandwidth into ZLOAD = 50 Ω
  • Noise figure < 3 dB in 1-dB bandwidth
  • 35-dBm OIP3 at 2-dBm two-tone output power into ZLOAD = 50 Ω
  • 17.5-dBm output P1dB into ZLOAD = 50 Ω
  • 275-mW power consumption on 3.3-V single supply
  • Up to TA = 105°C operating temperature

The LMH9226 is high-performance, single-channel, single-ended, 50-Ω input to differential 50-Ω or 100-Ω output RF gain block amplifier supporting a 2.3-GHz to 2.9-GHz frequency band. The device is well suited to meet requirements for 5G m-MIMO or small cell base station applications. The device integrates the functionality of a single-ended input and output RF gain block followed by a passive balun, where the device is mainly used in the final stage of a receiver signal chain to drive the full-scale voltage of an analog-to-differential converter (ADC) differential input.

The LMH9226 provides 17-dB typical gain with excellent linearity performance of 35-dBm output IP3 at 2.6 GHz, and maintains less than a 3-dB noise figure across the entire 1-dB bandwidth of 400 MHz. The device is internally matched for a 50-Ω impedance at the single-ended input. The differential output can easily interface to a 50-Ω impedance without any external matching circuitry. For 100-Ω impedance matching, an external matching circuitry is required that typically results in a 0.3-dB gain loss at 2.6 GHz.

Operating on a single 3.3-V supply, the device consumes approximately 275 mW of stand-by power, making the device suitable for high-density, 5G, massive multiple-input and multiple-output (MIMO) applications. Also, the device is available in a space-saving, 2-mm × 2-mm, 12-pin WQFN package. The device is rated for an operating temperature of up to 105°C to provide a robust system design. A 1.8-V JEDEC compliant power-down pin is available for fast power-down and power-up of the device that is suitable for time division duplex (TDD) systems.

The LMH9226 is high-performance, single-channel, single-ended, 50-Ω input to differential 50-Ω or 100-Ω output RF gain block amplifier supporting a 2.3-GHz to 2.9-GHz frequency band. The device is well suited to meet requirements for 5G m-MIMO or small cell base station applications. The device integrates the functionality of a single-ended input and output RF gain block followed by a passive balun, where the device is mainly used in the final stage of a receiver signal chain to drive the full-scale voltage of an analog-to-differential converter (ADC) differential input.

The LMH9226 provides 17-dB typical gain with excellent linearity performance of 35-dBm output IP3 at 2.6 GHz, and maintains less than a 3-dB noise figure across the entire 1-dB bandwidth of 400 MHz. The device is internally matched for a 50-Ω impedance at the single-ended input. The differential output can easily interface to a 50-Ω impedance without any external matching circuitry. For 100-Ω impedance matching, an external matching circuitry is required that typically results in a 0.3-dB gain loss at 2.6 GHz.

Operating on a single 3.3-V supply, the device consumes approximately 275 mW of stand-by power, making the device suitable for high-density, 5G, massive multiple-input and multiple-output (MIMO) applications. Also, the device is available in a space-saving, 2-mm × 2-mm, 12-pin WQFN package. The device is rated for an operating temperature of up to 105°C to provide a robust system design. A 1.8-V JEDEC compliant power-down pin is available for fast power-down and power-up of the device that is suitable for time division duplex (TDD) systems.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet LMH9226 Single-Ended to Differential 2.3-GHz to 2.9-GHz RF Amplifier With Balun datasheet PDF | HTML 16 dic 2018
Certificate LMH9226RRLEVM EU Declaration of Conformity (DoC) 28 abr 2020
EVM User's guide LMH9226 Evaluation Module User's Guide 13 dic 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AFE79-LMH9-EVM — Placa de evaluación de diseño de referencia AFE7920 con baluns activos LMH9126, LMH9226, LMH9135 y L

The AFE79-LMH9-EVM evaluation module (EVM) is a board for evaluating the performance of the AFE79xx family of integrated RF sampling transceivers interfaced with the LMH9xxx family of active baluns. The AFE79-LMH9-EVM showcases the AFE7920, LMH9126, LMH9226, LMH9135, and LMH9235. The device is (...)
Guía del usuario: PDF
Placa de evaluación

LMH9226-EVM — Módulo de evaluación LMH9226 de amplificador de 2.6 GHz y terminación única con entrada a salida dif

The LMH9226 evaluation module (EVM) is used to evaluate the LMH9226 device, which is a single-ended input to differential output 19dB gain block amplifier available in 2x2mm2 12-pin RRL package. The device is well suited to support requirements for the next generation 5G m-MIMO Active antenna (...)
Guía del usuario: PDF
Modelo de simulación

LMH9226IRRLR ADS S-Parameter Model

SBOMB32.ZIP (8 KB) - S-Parameter Model
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RRL) 12 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos