TAC5411-Q1
Códec de audio mono con ADC de rango dinámico de 110 dB, DAC de 120 dB, entrada de HV y diagnóstico
TAC5411-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ TA ≤ +125°C
- ADC Channel
- Performance:
- Line differential input dynamic range: 108dB
- Mic differential input dynamic range: 108dB
- THD+N: –95dB
- Channel summing mode supports high SNR
- Input voltage:
- Differential, 10-VRMS full-scale inputs
- Single-ended, 5-VRMS full-scale inputs
- Sample rate (fS) = 8kHz to 768kHz
- Programmable microphone bias (5V to 10V):
- With an integrated efficient boost converter, or
- With external high voltage HVDD supply
- Programmable microphone input fault diagnostics:
- Open inputs or shorted inputs
- Short to ground, MICBIAS or VBAT
- Microphone bias over current protection
- Performance:
- DAC Channel
- DAC performance:
- DAC to Line Out Dynamic Range: 119dB
- DAC to HP Out Dynamic Range: 115dB
- THD+N: –95dB
- Head Phone/Line Out output voltage:
- Differential, 2-VRMS full-scale
- Single-ended, 1-VRMS full-scale
- DAC sample Rates (fs) = 8KHz to 768KHz
- DAC performance:
- Common Features
- Low Latency Filter Selection
- Programmable HPF and Biquad Filters
- I2C Control Interface
- Audio Serial Interface
- Format: TDM, I2S or Left Justified
- Word Length: 16,20,24 or 32 Bits
- Programmable PLL for Flexible Clocking
- Single Supply Operation: 3.3V
- I/O Supply Operation: 1.2V, 1.8V or 3.3V
The TAC5411-Q1 is a high performance Mono Codec with 10VRMS differential Input, 108dB Mono ADC and 2VRMS Mono DAC Channels. The TAC5411-Q1 supports both differential and Single Ended input and output. Device supports both Microphone and Line In input on ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5411-Q1 can drive up to 62.5mW into a Headphone Load. The device also offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAC5411-Q1 integrates an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3V supply, The device can also directly use an external high-voltage supply (HVDD), which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The TAC5411-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes. It allows for sample rates up to 768kHz. The TAC5411-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C. These integrated high-performance features, along with a single, 3.3V supply operation, makes TAC5411-Q1 an excellent choice for space-constrained automotive systems.
Productos similares que pueden interesarle
Pin por pin con la misma funcionalidad que el dispositivo comparado
Documentación técnica
Tipo | Título | Fecha | ||
---|---|---|---|---|
* | Data sheet | TAC5411-Q1 Automotive Low Power Mono Audio Codec with integrated programmable boost, micbias and diagnostics datasheet | PDF | HTML | 13 ene 2022 |
Application note | TAx5xxx-Q1 Fault Diagnostic Features | PDF | HTML | 15 nov 2023 | |
Application note | Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family | PDF | HTML | 08 nov 2023 | |
Application note | Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family | PDF | HTML | 07 nov 2023 | |
Application note | Analog Input Configurations, Mixing and Muxing of TAx5x1x-Q1 Devices | PDF | HTML | 30 oct 2023 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
TAC5411Q15B5EVM-K — Módulo de evaluación TAC5411-Q1
PUREPATHCONSOLE — Conjunto de aplicaciones de desarrollo gráfico de consola PurePath™ para diseño y desarrollo de sist
PurePath Console’s (...)
PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI
Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
---|---|---|
WQFN (RTV) | 32 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.