ホーム パワー・マネージメント LED ドライバ 車載 LED ドライバ

可変 LED ドライバ

この製品には新バージョンがあります。

open-in-new 代替品と比較
これまでにご購入されたお客様をサポートする目的でこの製品を引き続き生産しています。新規設計では代替品をご検討ください。
比較対象デバイスと同等の機能で、ピン配置が異なる製品
TPS92620-Q1 アクティブ 車載対応、熱均衡機能搭載、2 チャネル、大電流、40V、ハイサイド LED ドライバ 2 total channels instead of 1, thermal sharing capabilities, and rated for automotive.

製品詳細

Number of channels 1 Topology Current Source Rating Catalog Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Vout (min) (V) -1 Vout (max) (V) 41 Iout (max) (A) 0.5 Iq (typ) (mA) 12 Features Enable/Shutdown, Fault Detection, Thermal shutdown
Number of channels 1 Topology Current Source Rating Catalog Operating temperature range (°C) -40 to 125 Vin (min) (V) 4.5 Vin (max) (V) 40 Vout (min) (V) -1 Vout (max) (V) 41 Iout (max) (A) 0.5 Iq (typ) (mA) 12 Features Enable/Shutdown, Fault Detection, Thermal shutdown
WSON (DRJ) 8 16 mm² 4 x 4
  • Adjustable Constant Current up to 500 mA (±5%)
  • PWM Brightness Regulation
  • Wide Input Voltage Range up to 42 V
  • Low Drop Voltage
  • Open-Load Detection
  • Overtemperature Protection
  • Short-Circuit Proof
  • Reverse-Polarity Proof
  • Wide Temperature Range: –40°C to 150°C
  • Adjustable Constant Current up to 500 mA (±5%)
  • PWM Brightness Regulation
  • Wide Input Voltage Range up to 42 V
  • Low Drop Voltage
  • Open-Load Detection
  • Overtemperature Protection
  • Short-Circuit Proof
  • Reverse-Polarity Proof
  • Wide Temperature Range: –40°C to 150°C

The TL4242 device is an integrated, adjustable, constant-current source that can drive loads up to 500 mA. The output current level can be adjusted through an external resistor. The device is designed to supply high-power LEDs. The TL4242 is provided in the DRJ (WSON) package. Protection circuits prevent damage to the device in case of overload, short circuit, reverse polarity, and overtemperature. The connected LEDs are protected against reverse polarity as well as excess voltages up to 45 V.

The integrated PWM input of the TL4242 permits LED brightness regulation by pulse-width modulation (PWM). Due to the high input impedance of the PWM input, the LED driver can be operated as a protected high-side switch.

The TL4242 is characterized for operation from –40°C to 150°C.

The TL4242 device is an integrated, adjustable, constant-current source that can drive loads up to 500 mA. The output current level can be adjusted through an external resistor. The device is designed to supply high-power LEDs. The TL4242 is provided in the DRJ (WSON) package. Protection circuits prevent damage to the device in case of overload, short circuit, reverse polarity, and overtemperature. The connected LEDs are protected against reverse polarity as well as excess voltages up to 45 V.

The integrated PWM input of the TL4242 permits LED brightness regulation by pulse-width modulation (PWM). Due to the high input impedance of the PWM input, the LED driver can be operated as a protected high-side switch.

The TL4242 is characterized for operation from –40°C to 150°C.

ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート TL4242 500-mA, Adjustable, Constant-Current LED Driver データシート (Rev. B) PDF | HTML 2014年 3月 5日

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ