ホーム パワー・マネージメント LED ドライバ バックライト LED ドライバ

CCFL コントローラ、フル・ブリッジ位相シフト・トポロジ

製品詳細

Vin (min) (V) 8 Vin (max) (V) 30 Switching frequency (max) (kHz) 100 Operating temperature range (°C) -40 to 85 Rating Catalog
Vin (min) (V) 8 Vin (max) (V) 30 Switching frequency (max) (kHz) 100 Operating temperature range (°C) -40 to 85 Rating Catalog
TSSOP (DBT) 30 49.92 mm² 7.8 x 6.4
  • 8-V to 30-V Input Voltage Range
  • Full Bridge Topology With Integrated Gate Drives for 4 NMOS Switches
  • Synchronizable Constant Frequency Operation
  • Programmable Phase Delays of Operating Frequency for Master-Slave Operation
  • Lamp Voltage and Lamp Current Regulation
  • Analog and Burst Dimming
  • Configurable Distributed Burst Dimming in Multiple Controller Applications
  • Programmable Voltage Regulation Timeout for Startup and Fault Conditions
  • Open-Lamp and Short-Circuit Protection
  • Internal Over-Temperature Protection
  • Undervoltage Lockout
  • 30-pin TSSOP Package
  • APPLICATIONS
    • CCFL Backlight Power Supplies for Desktop Monitors and LCD TVs
    • CCFL Backlight Power Supplies for Notebook Computers

Distributed Dimming is a registered trademark of Texas Instruments.

  • 8-V to 30-V Input Voltage Range
  • Full Bridge Topology With Integrated Gate Drives for 4 NMOS Switches
  • Synchronizable Constant Frequency Operation
  • Programmable Phase Delays of Operating Frequency for Master-Slave Operation
  • Lamp Voltage and Lamp Current Regulation
  • Analog and Burst Dimming
  • Configurable Distributed Burst Dimming in Multiple Controller Applications
  • Programmable Voltage Regulation Timeout for Startup and Fault Conditions
  • Open-Lamp and Short-Circuit Protection
  • Internal Over-Temperature Protection
  • Undervoltage Lockout
  • 30-pin TSSOP Package
  • APPLICATIONS
    • CCFL Backlight Power Supplies for Desktop Monitors and LCD TVs
    • CCFL Backlight Power Supplies for Notebook Computers

Distributed Dimming is a registered trademark of Texas Instruments.

The TPS68000 device provides a power supply controller solution for CCFL backlight applications in a large variety of applications. The wide input voltage range of 8 V to 30 V makes it suitable to be powered directly from regulated 12-V or 24-V rails, or any other source with output voltages in this range. When using a 10% accurate regulated 5-V rail, it also can be used in notebook computers or other portable battery-powered equipment having lower minimum supply voltages. The controller is capable of driving the gates of all 4 NMOS switches directly without the need for any additional circuitry, like dedicated gate drivers or gate-drive transformers. The wide input voltage range also makes it easy to design CCFL converters with higher input voltages like 120 V or 400 V available at the output of a power factor correction unit. The TPS68000 also supports CCFL converter circuits driving multi-lamp applications, either by using higher power-rated switches and transformers, or using several TPS68000s synchronized. When synchronized, they can be operated either at the same frequency and phase, or phase shifted to minimize RMS input current. Already implemented smart dimming features, such as support of distributed dimming, also help to optimize the performance of multi-controller applications.

To start the lamp, an automatic strike control is implemented. It smoothly increases the lamp voltage by sweeping the operating frequency across the self resonance frequency of the transformer-series capacitor resonant circuit. During this time the maximum lamp voltage is limited and regulated by a voltage control loop until the lamp current increases to a value allowing the current control loop to take over control. The lamp current is regulated over a wide current range. To set the lamp brightness, analog and PWM dimming circuits are implemented. Analog and PWM dimming can be used independent of each other to control lamp brightness over a wide range.

To protect the circuit during fault conditions, for example broken, disconnected, or shorted lamps, overvoltage protection and overcurrent protection circuits are implemented. To protect the TPS68000 from overheating, an internal temperature sensor is implemented that triggers controller turn-off at an excessive device temperature.

The device is packaged in a 30-pin TSSOP package measuring 6,4 mm x 7,8 mm (DBT).

The TPS68000 device provides a power supply controller solution for CCFL backlight applications in a large variety of applications. The wide input voltage range of 8 V to 30 V makes it suitable to be powered directly from regulated 12-V or 24-V rails, or any other source with output voltages in this range. When using a 10% accurate regulated 5-V rail, it also can be used in notebook computers or other portable battery-powered equipment having lower minimum supply voltages. The controller is capable of driving the gates of all 4 NMOS switches directly without the need for any additional circuitry, like dedicated gate drivers or gate-drive transformers. The wide input voltage range also makes it easy to design CCFL converters with higher input voltages like 120 V or 400 V available at the output of a power factor correction unit. The TPS68000 also supports CCFL converter circuits driving multi-lamp applications, either by using higher power-rated switches and transformers, or using several TPS68000s synchronized. When synchronized, they can be operated either at the same frequency and phase, or phase shifted to minimize RMS input current. Already implemented smart dimming features, such as support of distributed dimming, also help to optimize the performance of multi-controller applications.

To start the lamp, an automatic strike control is implemented. It smoothly increases the lamp voltage by sweeping the operating frequency across the self resonance frequency of the transformer-series capacitor resonant circuit. During this time the maximum lamp voltage is limited and regulated by a voltage control loop until the lamp current increases to a value allowing the current control loop to take over control. The lamp current is regulated over a wide current range. To set the lamp brightness, analog and PWM dimming circuits are implemented. Analog and PWM dimming can be used independent of each other to control lamp brightness over a wide range.

To protect the circuit during fault conditions, for example broken, disconnected, or shorted lamps, overvoltage protection and overcurrent protection circuits are implemented. To protect the TPS68000 from overheating, an internal temperature sensor is implemented that triggers controller turn-off at an excessive device temperature.

The device is packaged in a 30-pin TSSOP package measuring 6,4 mm x 7,8 mm (DBT).

ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート Highly Efficient Phase Shift Full Bridge CCFL Controller データシート (Rev. A) 2006年 2月 17日

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報:
  • ファブの拠点
  • 組み立てを実施した拠点