UC2856Q
- Pin-for-Pin Compatible With the UC2846
- 65-ns Typical Delay From Shutdown to
Outputs and 50-ns Typical Delay From
Sync to Outputs - Improved Current Sense Amplifier With
Reduced Noise Sensitivity - Differential Current Sense With 3-V
Common Mode Range - Trimmed Oscillator Discharge Current for
Accurate Deadband Control - Accurate 1-V Shutdown Threshold
- High Current Dual Totem Pole
Outputs (1.5-A peak) - TTL Compatible Oscillator SYNC Pin
Thresholds - 4-kV ESD Protection
The UC2856 is a high performance version of the popular UC2846 series of current mode controllers, and is intended for both design upgrades and new applications where speed and accuracy are important. All input to output delays have been minimized, and the current sense output is slew rate limited to reduce noise sensitivity. Fast 1.5-A peak output stages have been added to allow rapid switching of power FETs.
A low impedance TTL compatible sync output has been implemented with a 3-state function when used as a sync input.
Internal chip grounding has been improved to minimize internal noise caused when driving large capacitive loads. This, in conjunction with the improved differential current sense amplifier, results in enhanced noise immunity.
Other features include a trimmed oscillator current (8%) for accurate frequency and dead time control; a 1 V, 5% shutdown threshold; and 4 kV minimum ESD protection on all pins.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能
技術資料
| 種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
|---|---|---|---|---|---|---|
| * | データシート | UC2856Q: Improved Current Mode PWM Controller データシート (Rev. A) | 2011年 5月 26日 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点