CC1000은(는) 새 설계에 권장하지 않습니다.
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
CC1101 활성 저전력 1GHz 미만 무선 트랜시버 This product has improved performance and errata fixes.

제품 상세 정보

Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transceiver TX power (max) (dBm) 10 Sensitivity (best) (dBm) -110 RX current (lowest) (mA) 7.4 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
Protocols Proprietary Modulation scheme 2(G)FSK Frequency bands 300-1000 Type Transceiver TX power (max) (dBm) 10 Sensitivity (best) (dBm) -110 RX current (lowest) (mA) 7.4 Data rate (max) (Mbps) 0.0768 Rating Catalog Operating temperature range (°C) -40 to 85
TSSOP (PW) 28 62.08 mm² 9.7 x 6.4
  • True single chip UHF RF transceiver
  • Very low current consumption
  • Frequency range 300 - 1000 MHz
  • Integrated bit synchroniser
  • High sensitivity (typical -110 dBm at 2.4 kBaud)
  • Programmable output power -20 to 10 dBm
  • Small size (TSSOP-28 or UltraCSP™ package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • No external RF switch / IF filter required
  • RSSI output
  • Single port antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development kit available
  • Easy-to-use software for generating the CC1000 configuration data
  • Applications
    • Very low power UHF wireless data transmitters and receivers
    • 315 / 433 / 868 and 915 MHz ISM/SRD band systems
    • RKE - Two-way Remote Keyless Entry
    • Home automation
    • Wireless alarm and security systems
    • AMR - Automatic Meter Reading
    • Low power telemetry
    • Game Controllers and advanced toys

  • True single chip UHF RF transceiver
  • Very low current consumption
  • Frequency range 300 - 1000 MHz
  • Integrated bit synchroniser
  • High sensitivity (typical -110 dBm at 2.4 kBaud)
  • Programmable output power -20 to 10 dBm
  • Small size (TSSOP-28 or UltraCSP™ package)
  • Low supply voltage (2.1 V to 3.6 V)
  • Very few external components required
  • No external RF switch / IF filter required
  • RSSI output
  • Single port antenna connection
  • FSK data rate up to 76.8 kBaud
  • Complies with EN 300 220 and FCC CFR47 part 15
  • Programmable frequency in 250 Hz steps makes crystal temperature drift compensation possible without TCXO
  • Suitable for frequency hopping protocols
  • Development kit available
  • Easy-to-use software for generating the CC1000 configuration data
  • Applications
    • Very low power UHF wireless data transmitters and receivers
    • 315 / 433 / 868 and 915 MHz ISM/SRD band systems
    • RKE - Two-way Remote Keyless Entry
    • Home automation
    • Wireless alarm and security systems
    • AMR - Automatic Meter Reading
    • Low power telemetry
    • Game Controllers and advanced toys

CC1000 is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1000 can be programmed via a serial bus, thus making CC1000 a very flexible and easy to use transceiver. In a typical system CC1000 will be used together with a microcontroller and a few external passive components.

CC1000 is based on Chipcon’s SmartRF® technology in 0.35 µm CMOS.

CC1000 is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-1000 MHz range.

The main operating parameters of CC1000 can be programmed via a serial bus, thus making CC1000 a very flexible and easy to use transceiver. In a typical system CC1000 will be used together with a microcontroller and a few external passive components.

CC1000 is based on Chipcon’s SmartRF® technology in 0.35 µm CMOS.

다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기
유형 직함 날짜
* Data sheet Single-Chip Very Low Power RF Transceiver datasheet (Rev. A) 2007/02/07
* Radiation & reliability report CC1000 Reliability Report 2006/04/28
* Errata CC1000 Errata Notes 2006/01/31

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치