이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
HDC1080
- Relative Humidity Accuracy ±2% (typical)
- Temperature Accuracy ±0.2°C (typical)
- Excellent Stability at High Humidity
- 14 Bit Measurement Resolution
- 100 nA Sleep Mode Current
- Average Supply Current:
- 710 nA @ 1sps, 11 bit RH Measurement
- 1.3 µA @ 1sps, 11 bit RH and Temperature
Measurement
- Supply Voltage 2.7 V to 5.5 V
- Small 3 mm × 3 mm Device Footprint
- I2C Interface
The HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | HDC1080 Low Power, High Accuracy Digital Humidity Sensor with Temperature Sensor datasheet (Rev. A) | PDF | HTML | 2016/01/14 |
| Application note | Is a Protective Cover Needed for Humidity Sensors? | PDF | HTML | 2021/04/21 | |
| Application note | Humidity Sensor: Storage and Handling Guidelines | 2017/08/28 | ||
| Application note | Optimizing Placement and Routing for Humidity Sensors (Rev. A) | 2017/03/06 | ||
| Technical article | Industrial stack lights get smarter with LEDs | PDF | HTML | 2016/08/09 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
HDC1080EVM — HDC1080 저전력 습도 및 온도 센서 평가 모듈
The HDC1080EVM evaluation kit is a plug and play system to test and evaluate the HDC1080 humidity and temperature sensor. The EVM utilizes a USB interface for control and data streaming, and can be to plugged into a PC USB port. With the simple GUI, humidity and temperature measurements can be (...)
사용 설명서: PDF
레퍼런스 디자인
TIDA-00420 — ADC 기반, 디지털 절연, 넓은 입력, 16채널, AC/DC 이진 입력 레퍼런스 설계
This reference design showcases a cost-optimized and scalable ADC-based AC/DC binary input module (BIM) architecture with reinforced isolation. The 16 channels of a 10- or 12-bit SAR ADC are used for sensing multiple binary inputs. The op amps, in addition to keeping the cost per-channel low, (...)
레퍼런스 디자인
TIDA-00979 — 산업 자동화용 RGB LED 신호 타워 레퍼런스 디자인
This reference design is a multi-segment RGB signal tower for industrial process automation. The reference design enables fully flexible control of color and brightness and allows easy modification of the amount of segments. With this smart process condition and safety indicator, (...)
레퍼런스 디자인
TIDA-00666 — 4~20mA 전류 루프 전원 사용 필드 트랜스미터 BLE 연결 레퍼런스 디자인
TIDA-00666 enables Bluetooth Low Energy communication powered from a 2-wire 4- to 20-mA loop. For industrial process control instruments, analog 4- to 20-mA current loops are commonly used for analog signaling, with 4 mA representing the lowest end of the range and 20 mA the highest. This (...)
레퍼런스 디자인
TIDA-00854 — 마이크로파워 전자화학 가스 센서 증폭기 레퍼런스 디자인
This reference design consists of a micropower “Potentistat” type electrochemical sensor circuit for battery operated portable or long-life portable or fixed remote location devices. Using a nanopower amplifier and reference circuit allows the circuit to function continuously and (...)
레퍼런스 디자인
TIDA-01437 — IO-Link 인터페이스를 갖춘 RGB 신호 조명 레퍼런스 디자인
This reference design implements a five-segment LED smart stack light with 20 LEDs used in factory floor and industrial process automation of greater complexity. An IO-Link interface is implemented for controlling the stack light and reading back status information. The design features low power (...)
레퍼런스 디자인
TIDA-010008 — 그리드 애플리케이션의 과도 차단 기능을 위한 평면 클램프 TV 기반 레퍼런스 설계
This reference design features multiple approaches for protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
레퍼런스 디자인
TIDA-00980 — IO 링크 인터페이스를 지원하는 RGB LED 신호 타워 레퍼런스 디자인
The objective of the TIDA-00980 reference design is to develop an embedded firmware to interface and control the functions of a multi-segment RGB signal tower used in factory floor and industrial process automation of greater complexity. This design helps to give more flexible usage along (...)
레퍼런스 디자인
TIDA-00972 — 견고한 2m 회선 통신을 지원하는 ±2% 정확도의 습도 센서 레퍼런스 디자인
The TIDA-00972 reference design provides a sensor module level solution for +/- 2% of accuracy and reliable Relative Humidity (RH) and +/- 0.2 °C accuracy temperature sensing. The sensor module utilizes TI’s digital humidity and temperature sensor HDC1080 together with integrated (...)
레퍼런스 디자인
TIDA-00994 — Wi-Fi® 인터페이스를 지원하는 RGB LED 신호 타워 레퍼런스 디자인
The objective of the TIDA-00994 reference design is to develop an embedded firmware of a multi-segment RGB signal tower used in factory floor and industrial process automation of greater complexity. A Wi-Fi ® interface is implemented to control the stack light and read back status information. (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DMB) | 6 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치