LMK3C0105
- Integrated BAW resonator, no need for external reference
- Flexible frequency generation:
- 100MHz to 400MHz dual Fractional Output Dividers (FODs)
- Two channel dividers: up to three unique output frequencies from 2.5MHz to 200MHz
- Example: OUTA/B/C/D/E = 25MHz
- Example: OUTA/B = 100MHz, OUTC/D = 50MHz, OUTE = 25MHz
- 1.8V/2.5V/3.3V LVCMOS outputs supported up to 200MHz
- Generation of up to 5 LVCMOS clocks on OUTA through OUTE pins
- ±25ppm total output frequency stability
- 2 functional modes: I2C or preprogrammed OTP
- –40°C to 85°C ambient temperature.
- Mixed SSC and non-SSC output support
- Programmable SSC modulation depth
- Preprogrammed: –0.1%, –0.25%, –0.3% and –0.5% down spread
- Register programmable: –0.1% to –3% down spread or ±0.05% to ±1.5% center spread
- VDD = VDDO = 1.8V/2.5V/3.3V ± 5%
- <5ms start-up time
- <50ps output-to-output skew when the outputs are from the same FOD
- Fail-safe input and VDD pins
The LMK3C0105 is a 5-output reference-less clock generator with SSC support. The device is based on TI proprietary Bulk Acoustic Wave (BAW) technology and provides ±25ppm clock outputs without any crystal or external clock reference. The device can provide 5 SSC clocks, 5 non-SSC clocks, or mixed SSC and non-SSC clocks at the same time. Up to three different output frequencies can be generated across the five outputs. Each output channel can select either FOD as the frequency source to generate four LVCMOS clocks; the REF_CTRL pin functions as a fifth LVCMOS clock output, and can select either FOD as the source.
The device can be easily configured through either GPIO pins or the I2C interface. The LMK3C0105 has very good PSNR and does not require any external LDO. Refer to Power Supply Recommendations for detailed guidelines on power supply filtering and sourcing from a DC/DC supply.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LMK3C0105 Reference-less 5-LVCMOS-Output Programmable BAW Clock Generator datasheet | PDF | HTML | 2024/12/09 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TICSPRO-SW — 텍사스 인스트루먼트 클록 및 신시사이저(TICS) Pro 소프트웨어
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
TQFN (RER) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.