제품 상세 정보

Number of input channels 1 Operating temperature range (°C) -40 to 125 Vs (min) (V) 3.5 Vs (max) (V) 30 Interface type SPI, OWI and Voltage output Resolution (Bits) 24 Rating Catalog
Number of input channels 1 Operating temperature range (°C) -40 to 125 Vs (min) (V) 3.5 Vs (max) (V) 30 Interface type SPI, OWI and Voltage output Resolution (Bits) 24 Rating Catalog
HTQFP (PHP) 48 81 mm² 9 x 9
  • Analog features
    • Programmable-gain analog front end for LVDT sensors
    • Excitation waveform generator and amplifier
    • Dual 24-bit ADC with amplitude and phase demodulators
    • 24-bit auxilary ADC
    • On-chip internal temperature sensor
    • 14-bit output DAC with programmable gain
    • Built-in diagnostics
  • Digital features
    • ARM® Cortex®-M0 microcontroller
    • 16KB ferroelectric RAM (FRAM) program memory
    • 2KB general-pupose RAM
    • 512B RAM waveform-generator look-up table
    • 8-MHz on-chip oscillator
  • Peripheral features
    • Serial peripheral interface (SPI)
    • One-wire interface (OWI)
    • Ratiometric and absolute voltage output
  • General features
    • Operational supply range: 3.5 V to 30 V
    • Ambient temperature range: –40°C to +125°C
    • DMOS gate controller for extended supply range >30 V
  • Analog features
    • Programmable-gain analog front end for LVDT sensors
    • Excitation waveform generator and amplifier
    • Dual 24-bit ADC with amplitude and phase demodulators
    • 24-bit auxilary ADC
    • On-chip internal temperature sensor
    • 14-bit output DAC with programmable gain
    • Built-in diagnostics
  • Digital features
    • ARM® Cortex®-M0 microcontroller
    • 16KB ferroelectric RAM (FRAM) program memory
    • 2KB general-pupose RAM
    • 512B RAM waveform-generator look-up table
    • 8-MHz on-chip oscillator
  • Peripheral features
    • Serial peripheral interface (SPI)
    • One-wire interface (OWI)
    • Ratiometric and absolute voltage output
  • General features
    • Operational supply range: 3.5 V to 30 V
    • Ambient temperature range: –40°C to +125°C
    • DMOS gate controller for extended supply range >30 V

The PGA970 is a highly integrated system-on-chip LVDT sensor-signal conditioner with advanced signal-processing capabilities. It contains a three-channel, low-noise, programmable-gain, analog front end that allows direct connection to the sense element, followed by three independent 24-bit delta-sigma ADCs.

Further, the device contains a digital signal-demodulation block that interfaces to an integrated ARM-Cortex M0 MCU, allowing implementation of custom sensor-compensation algorithms stored in the device nonvolatile memory. External system communication is achieved by using any of the SPI, OWI, GPIO, or PWM digital interfaces. Analog output is supported through a 14-bit DAC and programmable-gain amplifier offering reference or absolute-voltage output. Sensing-element excitation is achieved by the use of an integrated waveform generator and waveform amplifier. The waveform signal data is user-defined and stored in a designated RAM memory area.

Besides the primary functional components, the PGA970 is equipped with additional support circuitry. The device diagnostics, sensor diagnostics, and integrated temperature sensor provide protection and information about the integrity of the overall system and sensing element. The device also includes a gate-controller circuit which when used with an external depletion MOSFET can regulate the device supply voltage in systems where the supply voltage exceeds 30 V.

The PGA970 is a highly integrated system-on-chip LVDT sensor-signal conditioner with advanced signal-processing capabilities. It contains a three-channel, low-noise, programmable-gain, analog front end that allows direct connection to the sense element, followed by three independent 24-bit delta-sigma ADCs.

Further, the device contains a digital signal-demodulation block that interfaces to an integrated ARM-Cortex M0 MCU, allowing implementation of custom sensor-compensation algorithms stored in the device nonvolatile memory. External system communication is achieved by using any of the SPI, OWI, GPIO, or PWM digital interfaces. Analog output is supported through a 14-bit DAC and programmable-gain amplifier offering reference or absolute-voltage output. Sensing-element excitation is achieved by the use of an integrated waveform generator and waveform amplifier. The waveform signal data is user-defined and stored in a designated RAM memory area.

Besides the primary functional components, the PGA970 is equipped with additional support circuitry. The device diagnostics, sensor diagnostics, and integrated temperature sensor provide protection and information about the integrity of the overall system and sensing element. The device also includes a gate-controller circuit which when used with an external depletion MOSFET can regulate the device supply voltage in systems where the supply voltage exceeds 30 V.

다운로드
추가 정보 요청

전체 데이터 시트를 사용할 수 있습니다. 지금 요청

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet PGA970 LVDT Sensor Signal Conditioner datasheet PDF | HTML 2019/04/02

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​