程式碼範例或展示
DRV5057-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 0: –40°C to 150°C
- PWM-output linear Hall effect magnetic sensor
- Operates from 3.3-V and 5-V power supplies
- 2-kHz clock output with 50% quiescent duty cycle
- Magnetic sensitivity options (at VCC = 5 V):
- A1: 2%D/mT, ±21-mT range
- A2: 1%D/mT, ±42-mT range
- A3: 0.5%D/mT, ±84-mT range
- A4: 0.25%D/mT, ±168-mT range
- Open-drain output with 20-mA sink capability
- Compensation for magnet temperature drift
- Industry standard package:
- Surface-mount SOT-23
The DRV5057-Q1 is a linear Hall effect sensor that responds proportionally to magnetic flux density. The device can be used for accurate position sensing in a wide range of applications.
The device operates from 3.3-V or 5-V power supplies. When no magnetic field is present, the output produces a clock with a 50% duty cycle. The output duty cycle changes linearly with the applied magnetic flux density, and four sensitivity options maximize the output dynamic range based on the required sensing range. North and south magnetic poles produce unique outputs. The typical pulse-width modulation (PWM) carrier frequency is 2 kHz.
Magnetic flux perpendicular to the top of the package is sensed, and the two package options provide different sensing directions.
Because the PWM signal is based on edge-to-edge timing, signal integrity is maintained in the presence of voltage noise or ground potential mismatch. This signal is suitable for distance transmission in noisy environments, and the always-present clock allows the system controller to confirm there are good interconnects. Additionally, the device features magnet temperature compensation to counteract how magnets drift for linear performance across a wide –40°C to +150°C temperature range.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV5057-Q1 Automotive Linear Hall Effect Sensor With PWM Output datasheet | PDF | HTML | 2019年 8月 13日 |
| Application brief | Absolute Angle Measurements for Rotational Motion Using Hall-Effect Sensors (Rev. B) | PDF | HTML | 2024年 5月 24日 | |
| Application note | Linear Hall-Effect Sensor Array Design (Rev. B) | PDF | HTML | 2024年 5月 24日 | |
| Application brief | Tracking Slide-By Displacement With Linear Hall-Effect Sensors (Rev. B) | PDF | HTML | 2024年 5月 21日 | |
| Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023年 12月 5日 | |
| User guide | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023年 12月 4日 | |
| Application note | Linear Hall-Effect Sensor Angle Measurement Theory, Implementation... (Rev. B) | PDF | HTML | 2021年 11月 5日 | |
| Application brief | Overview Using Linear Hall Effect Sensors to Measure (Rev. A) | 2018年 8月 22日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DRV5055-5057EVM — DRV5055、DRV5056 和 DRV5057 線性霍爾效應感測器評估模組
TheDRV505x is a linear Hall Effect magnetic-sense solution that provides ease of use and high performance. The DRV5055-5057EVM is intended to provide basic functional evaluation of this device family. The fixture layout is not intended to be a model for the target circuit, nor is it laid out for (...)
使用指南: PDF
開發板
HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組
Speed up your switch, latch and linear Hall sensor prototyping and testing with the HALL-ADAPTER-EVM, which provides a fast, easy and inexpensive way to interface with small ICs. You can connect any supported Hall sensor using the included Samtec terminal strips or wire them directly to existing (...)
軟體程式設計工具
SLIC027 — DRV5055-ANGLE-EVM MSP Flasher Batch File
支援產品和硬體
產品
線性霍爾效應感測器
硬體開發
開發板
計算工具
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
支援產品和硬體
產品
多軸線性與角度位置感測器
線性霍爾效應感測器
霍爾效應鎖存器和開關
硬體開發
開發板
軟體
計算工具
模擬工具
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
支援產品和硬體
產品
霍爾效應鎖存器和開關
線性霍爾效應感測器
多軸線性與角度位置感測器
硬體開發
開發板
軟體
計算工具
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。