程式碼範例或展示
DRV5056-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 0: –40°C to 150°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Functional Safety-Capable
- Unipolar linear hall effect magnetic sensor
- Operates from 3.3-V and 5-V power supplies
- Analog output with 0.6-V quiescent offset:
- Maximizes voltage swing for high accuracy
- Magnetic sensitivity options (at VCC = 5 V):
- A1: 200 mV/mT, 20-mT range
- A2: 100 mV/mT, 39-mT range
- A3: 50 mV/mT, 79-mT range
- A4: 25 mV/mT, 158-mT range
- Fast 20-kHz sensing bandwidth
- Low-noise output with ±1-mA drive
- Compensation for magnet temperature drift
- Standard industry packages:
- Surface-mount SOT-23
- Through-hole TO-92
The DRV5056-Q1 is a linear Hall-effect sensor that responds proportionally to flux density of a magnetic south pole. The device can be used for accurate position sensing in a wide range of applications.
Featuring a unipolar magnetic response, the analog output drives 0.6 V when no magnetic field is present, and increases when a south magnetic pole is applied. This response maximizes the output dynamic range in applications that sense one magnetic pole. Four sensitivity options further maximize the output swing based on the required sensing range.
The device operates from 3.3-V or 5-V power supplies. Magnetic flux perpendicular to the top of the package is sensed, and the two package options provide different sensing directions.
The device uses a ratiometric architecture that can minimize error from VCC tolerance when the external analog-to-digital converter (ADC) uses the same VCC for its reference. Additionally, the device features magnet temperature compensation to counteract how magnets drift for linear performance across a wide –40°C to +150°C temperature range.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV5056-Q1 Automotive Unipolar Ratiometric Linear Hall-Effect Sensor datasheet (Rev. B) | PDF | HTML | 2024年 12月 17日 |
| Functional safety information | DRV5056-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2024年 12月 17日 | |
| Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023年 12月 5日 | |
| User guide | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023年 12月 4日 | |
| Application note | Linear Hall-Effect Sensor Angle Measurement Theory, Implementation... (Rev. B) | PDF | HTML | 2021年 11月 5日 | |
| User guide | HALL-ADAPTER-EVM User's Guide (Rev. C) | PDF | HTML | 2021年 10月 21日 | |
| EVM User's guide | DRV5055-5057EVM User's Guide | 2019年 1月 25日 | ||
| Technical article | Intro to linear Hall effect sensors: Achieve contactless accurate position sensing | PDF | HTML | 2018年 9月 6日 | |
| Application brief | Overview Using Linear Hall Effect Sensors to Measure (Rev. A) | 2018年 8月 22日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
DRV5055-5057EVM — DRV5055、DRV5056 和 DRV5057 線性霍爾效應感測器評估模組
TheDRV505x is a linear Hall Effect magnetic-sense solution that provides ease of use and high performance. The DRV5055-5057EVM is intended to provide basic functional evaluation of this device family. The fixture layout is not intended to be a model for the target circuit, nor is it laid out for (...)
使用指南: PDF
開發板
HALL-ADAPTER-EVM — 霍爾感測器匯接轉接器評估模組
Speed up your switch, latch and linear Hall sensor prototyping and testing with the HALL-ADAPTER-EVM, which provides a fast, easy and inexpensive way to interface with small ICs. You can connect any supported Hall sensor using the included Samtec terminal strips or wire them directly to existing (...)
軟體程式設計工具
SLIC027 — DRV5055-ANGLE-EVM MSP Flasher Batch File
支援產品和硬體
產品
線性霍爾效應感測器
硬體開發
開發板
計算工具
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
支援產品和硬體
產品
多軸線性與角度位置感測器
線性霍爾效應感測器
霍爾效應鎖存器和開關
硬體開發
開發板
軟體
計算工具
計算工具
SBAC231 — DRV5056 Distance Measurement Tool
支援產品和硬體
模擬工具
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
支援產品和硬體
產品
霍爾效應鎖存器和開關
線性霍爾效應感測器
多軸線性與角度位置感測器
硬體開發
開發板
軟體
計算工具
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
| TO-92 (LPG) | 3 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。