TMAG5170D-Q1
- 3D Hall-effect sensor performance:
- Sensitivity mismatch thermal drift X-Y axes: ±2.3% (Max)
- X-Y angle thermal drift: ±1.2° (Max)
- 20 kSPS conversion rate for single axis
- Fully isolated dual-die with vertically aligned sensing elements
- Functional Safety-Compliant:
- Developed for functional safety applications
- Designed to meet ASIL D requirements when implemented with the appropriate system-level control according to the Functional Safety Manual
- AEC-Q100 qualified for automotive applications:
- Temperature grade 0: –40°C to 150°C
- Configurable 10-MHz serial peripheral interface (SPI) with cyclic redundancy check (CRC)
- Built-in temperature sensor and compensation for multiple magnet types
- Independently selectable X, Y, and Z ranges:
- TMAG5170DA1-Q1: ±25, ±50, ±100 mT
- TMAG5170DA2-Q1: ±75, ±150, ±300 mT
- Autonomous wake-up and sleep mode for threshold detection consuming only 1.5 µA
- Integrated digital filter with up to 32 times sensor data integration
- Conversion trigger through the ALERT, CS, or SPI communications
- Supply voltage range: 2.3 V to 5.5 V
The TMAG5170D-Q1 is a fully redundant, electrically isolated dual die 3D hall effect sensor with a precision signal chain. The two dies are vertically aligned providing superior matching output results with each die being independently configurable, including temperature sensing with temperature drift compensation. Multiple measurement types are supported included 1D linear, 2D angle, 3D joystick and magnetic threshold cross applications.
The TMAG5170D-Q1 contains on-chip diagnostic features required for high reliability automotive and industrial applications, including monitors of both internal and external fault conditions. The device supports multiple power options such as wake-up and sleep mode, allowing designers to optimize system power consumption based on system-level needs.
Integrated angle calculation engine (CORDIC) provides full 360° angular position information for both on-axis and off-axis angle measurements with magnetic gain and offset correction to mitigate the impact of system mechanical error sources. The integrated ALERT function can be used to generate interrupt with either sensor conversion, magnetic threshold cross, or functional safety violation.
索取更多資訊
提供功能安全文件。立即索取
您可能會感興趣的類似產品
功能相同,但引腳輸出與所比較的裝置不同
功能與所比較的裝置相似
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMAG5170DEVM — 適用高精確 3D 線性霍爾效應雙晶粒感測器的 TMAG5170DEVM 評估模組
TMAG5170DEVM 評估模組 (EVM) 是一款容易使用的平台,可評估雙晶粒 TMAG5170D 裝置的主要功能與性能。EVM 包括用來讀取和寫入暫存器,以及檢視和儲存測量結果的圖形使用者介面 (GUI)。此外也隨附 3D 列印旋轉及推送模組,以單一裝置測試角度量測與按鈕的一般功能。
SBAR012 — Angle Error Calculator for Linear 3D Hall-effect Sensors
支援產品和硬體
產品
多軸線性與角度位置感測器
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
支援產品和硬體
產品
霍爾效應鎖存器和開關
線性霍爾效應感測器
多軸線性與角度位置感測器
硬體開發
開發板
軟體
計算工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
TSSOP (PW) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。