DRV8220
- N-channel H-bridge motor driver
- MOSFET on-resistance: HS + LS 1 Ω
- Drives one bidirectional brushed DC motor
- Two unidirectional brushed DC motors
- One single- or dual-coil latching relay
- Push-pull and bistable solenoids
- Other resistive, inductive, or LED loads
- 4.5-V to 18-V operating supply voltage range
- High output current capability:
- Full-bridge: 1.76-A peak
- Half-bridge: 1.76-A peak per output
- Parallel half-bridge: 3.52-A peak
- Multiple interfaces for flexibility and reduced GPIO
-
Standard PWM Interface (IN1/IN2)
- Supports 1.8-V, 3.3-V, and 5-V logic inputs
- Ultra low-power sleep mode
- 960 nA @ VVM = 12 V, TJ = 25°C
- Timed autosleep mode to reduce GPIO
- Protection features
- Undervoltage lockout (UVLO)
- Overcurrent protection (OCP)
- Thermal shutdown (TSD)
- Family of devices. See Device Comparison for details.
The DRV8220 is an integrated motor driver with four N-channel power FETs, charge pump regulator, and protection circuitry. The charge pump integrates all capacitors to reduce the overall solution size of the motor driver on a PCB and allows for 100% duty cycle operation.
The DRV8220 supports multiple control interface modes including: PWM (IN1/IN2), phase/enable (PH/EN), independent half-bridge, and parallel half-bridge. Each interface supports a low-power sleep mode to achieve ultra-low quiescent current draw by shutting down most of the internal circuitry. The DSG package supports an nSLEEP pin to control sleep mode using a logic signal input.
The device can supply up to 1.76 A of output current. It operates with a supply voltage from 4.5 to 18 V.
The driver offers robust internal protection features include supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD).
The DRV8220 is part of a family of devices which come in pin-to-pin scalable RDS(on) and supply voltage options to support various loads and supply rails with minimal design changes. See Device Comparison for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8220 18-V H-Bridge Motor Driver with PWM, PH/EN, and Half-Bridge Control Interfaces and Low-Power Sleep Mode datasheet (Rev. B) | PDF | HTML | 2021年 8月 13日 |
| Application note | Smoke Alarm Sounder Using the DRV8220 and MSPM0G350x Microcontroller | PDF | HTML | 2024年 12月 22日 | |
| Application note | Automotive Door Handle Design with Position Sensors | PDF | HTML | 2024年 4月 10日 | |
| Technical article | Top 3 design considerations for EV charging | PDF | HTML | 2022年 6月 20日 | |
| Technical article | Benefits of flip chip on leadframe packaging for motor-drive applications | PDF | HTML | 2022年 4月 29日 | |
| Technical article | How to reduce board size and battery consumption in low-voltage H-bridge applicati | PDF | HTML | 2021年 6月 1日 | |
| EVM User's guide | DRV821xEVM and DRV8220EVM User's Guide (Rev. A) | 2020年 12月 17日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DRV8220EVM — 具低功耗休眠模式評估模組的 DRV8220 低電壓全橋馬達驅動器
DRV8220 評估模組 (EVM) 可用於輕鬆評估 DRV8220 馬達驅動器。
DRV8220 整合 N 通道全橋、充電泵浦穩壓器和防護電路。此裝置支援 PWM (IN1/IN2)、相位/啟用 (PH/EN)、獨立半橋及平行半橋控制模式。
EVM 配備了電位計，用於設定輸入控制針腳的工作週期 (PH/IN1、EN/IN2)。
TIDA-010239 — AC Level 2 充電器平台參考設計
TIDA-010237 — AC 和 DC 電流故障偵測參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | Ultra Librarian |
| WSON (DSG) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。