首頁 馬達驅動器 電磁線圈驅動器
首頁
馬達驅動器
電磁線圈驅動器

DRV8803

現行

60V, 2.3A 4 channel low-side driver with PWM control and overcurrent protection

立即訂購
產品規格表

DRV8803

現行
產品規格表 立即訂購

產品詳細資料

Control interface Hardware (GPIO) Control mode PWM Vs (max) (V) 60 Vs (min) (V) 8.2 Vs ABS (max) (V) 65 Peak output current (A) 2.3 Operating temperature range (°C) -40 to 125 Rating Catalog Topology LSS
Control interface Hardware (GPIO) Control mode PWM Vs (max) (V) 60 Vs (min) (V) 8.2 Vs ABS (max) (V) 65 Peak output current (A) 2.3 Operating temperature range (°C) -40 to 125 Rating Catalog Topology LSS
HTSSOP (PWP) 16 32 mm² 5 x 6.4 SOIC (DW) 20 131.84 mm² 12.8 x 10.3
  • 4-Channel Protected Low-Side Driver
    • Four NMOS FETs With Overcurrent Protection
    • Integrated Inductive Clamp Diodes
    • Parallel Interface
  • DW Package: 1.5-A (Single Channel On) /
    800-mA (Four Channels On) Maximum Drive
    Current per Channel (at 25°C)
  • PWP Package: 2-A (Single Channel On) /
    1-A (Four Channels On) Maximum Drive Current
    per Channel (at 25°C, With Proper PCB
    Heatsinking)
  • 8.2-V to 60-V Operating Supply Voltage Range
  • Thermally Enhanced Surface Mount Package
  • 4-Channel Protected Low-Side Driver
    • Four NMOS FETs With Overcurrent Protection
    • Integrated Inductive Clamp Diodes
    • Parallel Interface
  • DW Package: 1.5-A (Single Channel On) /
    800-mA (Four Channels On) Maximum Drive
    Current per Channel (at 25°C)
  • PWP Package: 2-A (Single Channel On) /
    1-A (Four Channels On) Maximum Drive Current
    per Channel (at 25°C, With Proper PCB
    Heatsinking)
  • 8.2-V to 60-V Operating Supply Voltage Range
  • Thermally Enhanced Surface Mount Package

The DRV8803 provides a 4-channel low side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.

In the SOIC (DW) package, the DRV8803 can supply up to 1.5-A (one channel on) or 800-mA (all channels on) continuous output current per channel, at 25°C. In the HTSSOP (PWP) package, it can supply up to 2-A (one channel on) or 1-A (four channels on) continuous output current per channel, at 25°C with proper PCB heatsinking.

The device is controlled through a simple parallel interface.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout and overtemperature and faults are indicated by a fault output pin.

The DRV8803 is available in a 20-pin thermally-enhanced SOIC package and a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).

The DRV8803 provides a 4-channel low side driver with overcurrent protection. It has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.

In the SOIC (DW) package, the DRV8803 can supply up to 1.5-A (one channel on) or 800-mA (all channels on) continuous output current per channel, at 25°C. In the HTSSOP (PWP) package, it can supply up to 2-A (one channel on) or 1-A (four channels on) continuous output current per channel, at 25°C with proper PCB heatsinking.

The device is controlled through a simple parallel interface.

Internal shutdown functions are provided for over current protection, short circuit protection, undervoltage lockout and overtemperature and faults are indicated by a fault output pin.

The DRV8803 is available in a 20-pin thermally-enhanced SOIC package and a 16-pin HTSSOP package (Eco-friendly: RoHS & no Sb/Br).
filter 尋找其它 電磁線圈驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11
類型 標題 日期
* Data sheet DRV8803 Quad Low-Side Driver IC datasheet (Rev. C) PDF | HTML 2015年 11月 30日
Application note Understanding Motor Driver Current Ratings (Rev. A) PDF | HTML 2024年 7月 5日
Application note Using DRV to Drive Solenoids (Rev. A) PDF | HTML 2022年 4月 24日
Application note How to Drive Unipolar Stepper Motor with the DRV8xxx PDF | HTML 2021年 12月 3日
Application note Best Practices for Board Layout of Motor Drivers (Rev. B) PDF | HTML 2021年 10月 14日
Application note Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) PDF | HTML 2021年 7月 22日
Technical article Drive unipolar stepper motors as bipolar stepper motors with a simple wiring recon PDF | HTML 2020年 4月 9日
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 2018年 7月 6日
User guide DRV8803-04-05-06 EVM GUI (Rev. B) 2017年 4月 26日
More literature TM4C123x Stepper Motor Control Product Summary 2015年 7月 6日
Application brief PowerPAD™ Made Easy (Rev. B) 2004年 5月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV8803EVM — DRV8803 評估模組

DRV8803 評估模組包含具有平行控制介面的四路低壓側馬達驅動器，其可用於驅動單極步進馬達、多達四個 DC 馬達或其他負載，例如電磁閥。憑借 DRV8803EVM，設計人員能在其特定應用中快速、輕鬆地評估 DRV8803 馬達驅動器的性能。此 EVM 配有板載 MSP430 微處理器，該微處理器已預先編程，適合獨立操作。MSP430 的電壓調節由 TPS7A4001 負責。此 EVM 可在 8.2V 至 60V 的電源電壓下運作。

使用指南: PDF
TI.com 無法提供
參考設計

TIDA-00737 — 適用於自動功率因數控制器的電容組控制和 HMI 子系統參考設計

This reference design demonstrates the working of various functional blocks of an automatic power factor controller (PFC) used in MV/LV electrical distribution. This includes accurate measurement and computation of voltages, currents, power and power factor, display of measured parameters (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010008 — 適合於電網應用之瞬態保護的平箝制 TVS 架構參考設計

This reference design features multiple approaches for  protecting AC or DC analog input, DC analog output, AC or DC binary input, digital output with a high side or low side driver, LCD bias supply, USB interfaces (power and data) and onboard power supplies with 24, 12 or 5V input used in (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00319 — 高速數位輸出 PLC 模組參考設計

This high-speed digital output reference design for programmable logic controllers (PLCs) illustrates low-cost, simple high-speed single-ended digital output module using standard low-side driver and backplane powered using isolated power stage. High-speed digital output modules are required for (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00320 — 適用於 PLC 的八通道平行 0.5A 低壓側數位輸出模組參考設計

Digital Output Modules are a standard component in a PLC/PAC or DCS to control actuators, motors and other resistive, capacitive or inductive loads. Customers will benefit from this integrated protected low side driver with parallel interface as it makes the MCU interface easy to test together with (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 16 Ultra Librarian
SOIC (DW) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片