首頁 音訊 音訊轉換器 音訊 ADC
首頁
音訊
音訊轉換器
音訊 ADC

PCM6340-Q1

現行

具有整合式麥克風偏壓和輸入診斷功能的車用 4 通道音訊 ADC

立即訂購
產品規格表

PCM6340-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of ADC channels 4 Analog inputs 4 Digital audio interface I2S, L, TDM Control interface I2C, SPI Sampling rate (max) (kHz) 768 ADC SNR (typ) (dB) 110 Rating Automotive Analog outputs 0 Operating temperature range (°C) -40 to 125
Number of ADC channels 4 Analog inputs 4 Digital audio interface I2S, L, TDM Control interface I2C, SPI Sampling rate (max) (kHz) 768 ADC SNR (typ) (dB) 110 Rating Automotive Analog outputs 0 Operating temperature range (°C) -40 to 125
WQFN (RTV) 32 25 mm² 5 x 5
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC performance:
    • Line differential input dynamic range: 110 dB
    • Microphone differential input dynamic range: 110 dB
    • THD+N: –95 dB
    • Channel summing mode supports high SNR
  • ADC input voltage:
    • Differential, 10-VRMS full-scale inputs
    • Single-ended, 5-VRMS full-scale inputs
  • ADC sample rate (fS) = 8 kHz to 768 kHz
  • Programmable channel settings:
    • Channel gain: 0 dB to 42 dB, 1-dB steps
    • Digital volume control: –100 dB to 27 dB
    • Gain calibration with 0.1-dB resolution
    • Phase calibration with 163-ns resolution
  • Programmable microphone bias (5 V to 9 V):
    • With integrated efficient boost converter, or
    • With external high voltage HVDD supply
  • Programmable microphone input fault diagnostics:
    • Open inputs or shorted inputs
    • Short to ground, MICBIAS or VBAT
    • Microphone bias over current protection
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • I2C or SPI controls
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply, 3.3-V operation
  • I/O supply operation: 3.3 V or 1.8 V
  • Power consumption:
    • < 20 mW/channel at 48-kHz
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC performance:
    • Line differential input dynamic range: 110 dB
    • Microphone differential input dynamic range: 110 dB
    • THD+N: –95 dB
    • Channel summing mode supports high SNR
  • ADC input voltage:
    • Differential, 10-VRMS full-scale inputs
    • Single-ended, 5-VRMS full-scale inputs
  • ADC sample rate (fS) = 8 kHz to 768 kHz
  • Programmable channel settings:
    • Channel gain: 0 dB to 42 dB, 1-dB steps
    • Digital volume control: –100 dB to 27 dB
    • Gain calibration with 0.1-dB resolution
    • Phase calibration with 163-ns resolution
  • Programmable microphone bias (5 V to 9 V):
    • With integrated efficient boost converter, or
    • With external high voltage HVDD supply
  • Programmable microphone input fault diagnostics:
    • Open inputs or shorted inputs
    • Short to ground, MICBIAS or VBAT
    • Microphone bias over current protection
  • Low-latency signal processing filter selection
  • Programmable HPF and biquad digital filters
  • I2C or SPI controls
  • Audio serial data interface:
    • Format: TDM, I2S, or left-justified (LJ)
    • Word length: 16 bits, 20 bits, 24 bits, or 32 bits
    • Master or slave interface
  • Single-supply, 3.3-V operation
  • I/O supply operation: 3.3 V or 1.8 V
  • Power consumption:
    • < 20 mW/channel at 48-kHz

The 4-channel PCM6x40-Q1 (PCM6240-Q1, PCM6340-Q1) and 6-channel PCM6x60-Q1 (PCM6260-Q1, PCM6360-Q1) are high-performance, audio analog-to-digital converters (ADCs) that support analog input signals up to 10 VRMS. The PCM6x40-Q1 and PCM6x60-Q1 (PCM6xx0-Q1) support line and microphone inputs, and allows for both single-ended and differential input configurations. These devices offer an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allow direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The PCM62x0-Q1 integrate an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3-V supply, whereas the PCM63x0-Q1 directly uses an external high-voltage supply (HVDD), which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The PCM6xx0-Q1 integrate the programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The PCM6xx0-Q1 support time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. These integrated high-performance features, along with a single, 3.3-V supply operation, make the PCM6xx0-Q1 family an excellent choice for space-constrained automotive systems.

The 4-channel PCM6x40-Q1 (PCM6240-Q1, PCM6340-Q1) and 6-channel PCM6x60-Q1 (PCM6260-Q1, PCM6360-Q1) are high-performance, audio analog-to-digital converters (ADCs) that support analog input signals up to 10 VRMS. The PCM6x40-Q1 and PCM6x60-Q1 (PCM6xx0-Q1) support line and microphone inputs, and allows for both single-ended and differential input configurations. These devices offer an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allow direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The PCM62x0-Q1 integrate an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3-V supply, whereas the PCM63x0-Q1 directly uses an external high-voltage supply (HVDD), which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The PCM6xx0-Q1 integrate the programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The PCM6xx0-Q1 support time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. These integrated high-performance features, along with a single, 3.3-V supply operation, make the PCM6xx0-Q1 family an excellent choice for space-constrained automotive systems.
filter 尋找其它 音訊 ADC
下載 觀看有字幕稿的影片 影片

索取更多資訊

提供 PurePath™ Console 3、PCM6340-Q1 GUI 和其他設計資源。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
PCM6240-Q1 現行 具有整合式可編程麥克風偏壓和輸入診斷功能的車用、4 通道音訊 ADC Integrated boost version, can be left unused
PCM6360-Q1 現行 具有整合式麥克風偏壓和輸入診斷功能的車用 6 通道音訊 ADC 6-channel version in the same package with software compatibility

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
類型 標題 日期
* Data sheet PCM6xx0-Q1 Automotive, 4-Channel and 6-Channel, 768-kHz, Audio ADC With Integrated Microphone Bias and Input Fault Diagnostics datasheet (Rev. A) PDF | HTML 2020年 6月 29日
Application note PCM6xx0-Q1 Use-Case Scenarios in Automotive Audio Applications (Rev. A) PDF | HTML 2022年 5月 26日
Application note Scalable Automotive Audio Solutions Using the PCM6xx0-Q1 Family of Products (Rev. A) PDF | HTML 2022年 5月 26日
Application note PCM6xx0-Q1 Power Consumption Matrix Across Various Usage Scenario (Rev. A) PDF | HTML 2021年 9月 21日
Application note Configuring and Operating PCM6xx0-Q1 as Audio Bus Controller PDF | HTML 2021年 6月 10日
Technical article 4 audio trends transforming the automotive industry PDF | HTML 2020年 7月 13日
EVM User's guide PCM6xx0Q1EVM-PDK Evaluation Module (Rev. B) 2020年 6月 30日
Application note PCM62X0 Integrated Analog Anti-Aliasing Filter and Flexible Digital Filter 2020年 6月 15日
Application note PCM62X0-Q1 Sampling Rates and Programmable Processing Blocks Supported 2020年 5月 15日
Application note PCM6xx0 Programmable Biquad Filter Configuration and Applications 2020年 4月 9日
Application note Multiple PCm6xx0 Devices With Shared TDM and I2C Bus PDF | HTML 2020年 4月 8日
Application note PCM6xx0-Q1 Fault Diagnostic Features 2020年 2月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

PCM6360Q1EVM-PDK — 具有整合式麥克風偏壓和輸入診斷的 PCM6360-Q1 6 通道音訊 ADC 評估模組

The PCM6360-Q1 evaluation module (EVM) performance development kit (PDK) allows the user to test the capabilities of the PCM6360-Q1 device, which is a a six-channel, high-performance audio analog-to-digital converter (ADC) that supports analog input signals up to 10 VRMS.

PCM6360-Q1 supports line (...)

使用指南: PDF
TI.com 無法提供
軟體轉碼器

PCMXXXX-DRIVERS — Linux drivers for TI's PCM6xxx, TLV320ADCxxxx and PCM5xxx device families.

PCMxxxx Linux driver supports TI's PCM6xxx, TLV320ADCxxxx and PCM5xxx device families. This Linux driver implements a flexible and configurable register setting for one or multiple devices in a bin file, will enable fast development for applications.
支援產品和硬體

支援產品和硬體

產品
音訊 ADC
PCM6240-Q1 — 具有整合式可編程麥克風偏壓和輸入診斷功能的車用、4 通道音訊 ADC PCM6260-Q1 — 具有整合式可編程麥克風偏壓、升壓和輸入診斷功能的車用 6 通道音訊 ADC PCM6340-Q1 — 具有整合式麥克風偏壓和輸入診斷功能的車用 4 通道音訊 ADC PCM6360-Q1 — 具有整合式麥克風偏壓和輸入診斷功能的車用 6 通道音訊 ADC TLV320ADC5140 — 具有 120 dB SNR 的四通道 768 kHz Burr-Brown™ 音訊類比轉數位轉換器 (ADC)
音訊 DAC
PCM5141 — 具 PCM 介面和完全可編程 miniDSP 的 2V RMS DIRECTPATH 106 dB 音訊立體聲 DAC
瀏覽 下載選項
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

SBAM436 — PCM6xx0-Q1 SIMULATION Models

支援產品和硬體

支援產品和硬體

產品
音訊 ADC
PCM6240-Q1 — 具有整合式可編程麥克風偏壓和輸入診斷功能的車用、4 通道音訊 ADC PCM6260-Q1 — 具有整合式可編程麥克風偏壓、升壓和輸入診斷功能的車用 6 通道音訊 ADC PCM6340-Q1 — 具有整合式麥克風偏壓和輸入診斷功能的車用 4 通道音訊 ADC PCM6360-Q1 — 具有整合式麥克風偏壓和輸入診斷功能的車用 6 通道音訊 ADC
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTV) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片