首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

TAS2521

現行

具 miniDSP & 18-mW 單聲道耳機驅動器的 2W、單聲道、數位與類比輸入 D 類音訊放大器

立即訂購
產品規格表

TAS2521

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 1.95 Power stage supply (min) (V) 1.5 Load (min) (Ω) 4 Output power (W) 2 SNR (dB) 94 THD + N at 1 kHz (%) 0.012 Iq (typ) (mA) 0.002 Control interface I2C, SPI Closed/open loop Open Analog supply (min) (V) 1.5 Analog supply voltage (max) (V) 1.95 Sampling rate (max) (kHz) 192 PSRR (dB) 47.2 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 1.95 Power stage supply (min) (V) 1.5 Load (min) (Ω) 4 Output power (W) 2 SNR (dB) 94 THD + N at 1 kHz (%) 0.012 Iq (typ) (mA) 0.002 Control interface I2C, SPI Closed/open loop Open Analog supply (min) (V) 1.5 Analog supply voltage (max) (V) 1.95 Sampling rate (max) (kHz) 192 PSRR (dB) 47.2 Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • Digital Input Mono Speaker Amp
  • Instruction-Programmable Embedded miniDSP
  • Supports 8-kHz to 192-kHz Sample Rates
  • Mono Class-D BTL Speaker Driver (2 W Into 4 Ω or 1.7 W Into 8 Ωp)
  • Mono Headphone Driver
  • Two Single-Ended Inputs With Output Mixing and Level Control
  • Embedded Power-on-Reset
  • Integrated LDO
  • Built-in Digital Audio Processing Blocks With User-Programmable
    Biquad Filters
  • Integrated PLL Used for Programmable Digital Audio Processor
  • I2S, Left-Justified, Right-Justified, DSP, and TDM
    Audio Interfaces
  • I2C and SPI control with auto-increment
  • Full Power-Down Control
  • Power Supplies:
    • Analog: 1.5 V–1.95 V
    • Digital Core: 1.65 V–1.95 V
    • Digital I/O: 1.1 V–3.6 V
    • Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD)
  • 24-Pin QFN Package (4mm × 4mm)
  • Digital Input Mono Speaker Amp
  • Instruction-Programmable Embedded miniDSP
  • Supports 8-kHz to 192-kHz Sample Rates
  • Mono Class-D BTL Speaker Driver (2 W Into 4 Ω or 1.7 W Into 8 Ωp)
  • Mono Headphone Driver
  • Two Single-Ended Inputs With Output Mixing and Level Control
  • Embedded Power-on-Reset
  • Integrated LDO
  • Built-in Digital Audio Processing Blocks With User-Programmable
    Biquad Filters
  • Integrated PLL Used for Programmable Digital Audio Processor
  • I2S, Left-Justified, Right-Justified, DSP, and TDM
    Audio Interfaces
  • I2C and SPI control with auto-increment
  • Full Power-Down Control
  • Power Supplies:
    • Analog: 1.5 V–1.95 V
    • Digital Core: 1.65 V–1.95 V
    • Digital I/O: 1.1 V–3.6 V
    • Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD)
  • 24-Pin QFN Package (4mm × 4mm)

The TAS2521 is a low power digital input speaker amp with support for 24-bit digital I2S data mono playback.

In addition to driving a speaker amp upto 4-Ω, the device also features a mono headphone driver and a fully programmable miniDSP for signal processing. The digital audio data format is programmable to work with popular audio standard protocols (I2S, left/right-justified) in master, slave, DSP and TDM modes. The fully programmable miniDSP can support several functions such equalization for audio, multi-band DRC, tone generation and several other user defined functions. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by register control. The audio functions are controlled using the I2C serial bus or SPI bus. The device includes an on-board LDO that runs off the speaker power supply to handle all internal device analog and digital power needs. The included POR as power-on-resetcircuit reliably resets the device into its default state so no external reset is required at normal usage; however, the device does have a reset pin for more complex system initialization needs. The device also includes two analog inputs for mixing and muxing in both speaker and headphone analog paths.

This data manual is designed using PDF document-viewing features that allow quick access to information. For example, performing a global search on "page 0 / register 27" produces all references to this page and register in a list. This makes is easy to traverse the list and find all information related to a page and register. Note that the search string must be of the indicated format. Also, this document includes document hyperlinks to allow the user to quickly find a document reference. To come back to the original page, click the green left arrow near the PDF page number at the bottom of the file. The hot-key for this function is alt-left arrow on the keyboard. Another way to find information quickly is to use the PDF bookmarks.

The TAS2521 is a low power digital input speaker amp with support for 24-bit digital I2S data mono playback.

In addition to driving a speaker amp upto 4-Ω, the device also features a mono headphone driver and a fully programmable miniDSP for signal processing. The digital audio data format is programmable to work with popular audio standard protocols (I2S, left/right-justified) in master, slave, DSP and TDM modes. The fully programmable miniDSP can support several functions such equalization for audio, multi-band DRC, tone generation and several other user defined functions. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by register control. The audio functions are controlled using the I2C serial bus or SPI bus. The device includes an on-board LDO that runs off the speaker power supply to handle all internal device analog and digital power needs. The included POR as power-on-resetcircuit reliably resets the device into its default state so no external reset is required at normal usage; however, the device does have a reset pin for more complex system initialization needs. The device also includes two analog inputs for mixing and muxing in both speaker and headphone analog paths.

This data manual is designed using PDF document-viewing features that allow quick access to information. For example, performing a global search on "page 0 / register 27" produces all references to this page and register in a list. This makes is easy to traverse the list and find all information related to a page and register. Note that the search string must be of the indicated format. Also, this document includes document hyperlinks to allow the user to quickly find a document reference. To come back to the original page, click the green left arrow near the PDF page number at the bottom of the file. The hot-key for this function is alt-left arrow on the keyboard. Another way to find information quickly is to use the PDF bookmarks.
filter 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TAS2505 現行 具音訊處理和單聲道耳機放大器的 2W、單聲道、數位與字類比輸入 D 級音訊放大器 Different DSP

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet Digital Input Class-D Speaker Amplifier with Embedded miniDSP and Mono Headphone datasheet (Rev. A) 2013年 2月 24日
Application note Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) 2019年 8月 26日
Application note AN-1849 An Audio Amplifier Power Supply Design (Rev. C) 2019年 6月 27日
User guide TAS25xx Codec Control EVM (Rev. A) 2017年 10月 31日
Application note AN-1737 Managing EMI in Class D Audio Applications (Rev. A) 2013年 5月 1日
User guide TAS2521 Application Reference Guide 2013年 2月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發模組 (EVM) 的 GUI

SLAC772 — TAS25xx Codec Control EVM GUI

支援產品和硬體

支援產品和硬體

產品
喇叭放大器
TAS2505 — 具音訊處理和單聲道耳機放大器的 2W、單聲道、數位與字類比輸入 D 級音訊放大器 TAS2521 — 具 miniDSP & 18-mW 單聲道耳機驅動器的 2W、單聲道、數位與類比輸入 D 類音訊放大器
硬體開發
開發板
TAS2505EVM — TAS2505 2W D 類音訊放大器評估模組
下載
模擬型號

TAS2521 IBIS Model

SLAM180.ZIP (125 KB) - IBIS Model
下載
計算工具

COEFFICIENT-CALC — Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

支援產品和硬體

支援產品和硬體

產品
音訊轉碼器
TLV320AIC26 — 具有耳機/喇叭放大器和 12 位元測量 ADC 的低功耗單聲道 ADC/立體聲 DAC TLV320AIC28 — 具 6 個音訊輸入和耳機/揚聲器放大器的低功耗單聲道 ADC/立體聲道 DAC TLV320AIC29 — 具 6 個音訊輸入和耳機/揚聲器放大器的低功耗單聲道 ADC/立體聲道 DAC TLV320AIC3007 — 具整合式 D 類放大器的低功耗立體聲道轉碼器 TLV320AIC31 — 具 6 輸入、6 輸出整合式耳機/揚聲器放大器以及 3D 效果的低功耗立體聲道轉碼器 TLV320AIC3100 — 具音訊處理和單聲道 D 類放大器的低功耗音訊轉碼器 TLV320AIC3101 — 具 6 個輸入、6 個輸出、喇叭/HP 放大器和強化數位效果的低功耗立體聲道轉碼器 TLV320AIC3104 — 具 6 個輸入、6 個輸出、HP 放大器和強化數位效果的低功耗立體聲道轉碼器 TLV320AIC3105 — 具 6 個輸入、6 個輸出、HP 放大器和強化數位效果的低功耗立體聲道轉碼器 TLV320AIC3106 — 具 10 輸入 7 輸出、耳機放大器和強化數位效果的低功耗立體聲道音訊轉碼器 TLV320AIC3107 — 具整合式單聲道 D 類放大器的低功耗立體聲道轉碼器 TLV320AIC3110 — 具 1.3W 立體聲道 D 類揚聲器放大器的低功耗音訊轉碼器 TLV320AIC3111 — 具嵌入式 miniDSP 和立體聲道 D 類揚聲器放大器的低功耗音訊轉碼器 TLV320AIC3120 — 具 miniDSP 和 2.5-W 單聲道 D 類揚聲器放大器的低功耗音訊轉碼器 TLV320AIC32 — 具有 6 輸入、6 輸出、耳機/喇叭放大器和 3D 效果的低功耗立體聲轉碼器 TLV320AIC3204 — 採用 PowerTune™ 技術的超低功耗立體聲道音訊轉碼器 TLV320AIC3206 — 具 DirectPath™ HP 放大器的超低功耗立體聲道轉碼器 TLV320AIC3254 — 具可編程 miniDSP 的超低功耗立體聲音訊轉碼器 TLV320AIC3256 — 具 miniDSP 和 DirectPath™ HP 放大器的超低功耗立體聲道轉碼器 TLV320AIC33 — 具有 10 輸入、7 輸出、耳機/喇叭放大器和增強數位效果的低功耗立體聲轉碼器 TLV320AIC34 — 低功耗 4 通道轉碼器 TSC2100 — 具有配備 HP/喇叭放大器的立體聲 DAC/單聲道 ADC 的 4 線觸控螢幕控制器 TSC2101 — 具有 HP/喇叭放大器立體聲 DAC/單聲道 ADC 的 4 線觸控螢幕控制器 TSC2102 — 具有附 HP 放大器的立體聲 DAC 的 4 線觸控螢幕控制器 TSC2117 — 具低功耗單聲道 ADC/立體聲 DAC 的 4 線觸摸式螢幕控制器 TSC2301 — 4 線觸控螢幕控制器、具 HP 放大器的標準轉碼器 (鍵盤 Int.+ 6 GPIO)
音訊 ADC
TLV320ADC3001 — 92dB SNR 低功耗立體聲道 ADC (ADC3001) TLV320ADC3101 — 具數位麥克風支援和 miniDSP 的 92-dB SNR 低功耗立體聲道 ADC
喇叭放大器
TAS2505 — 具音訊處理和單聲道耳機放大器的 2W、單聲道、數位與字類比輸入 D 級音訊放大器 TAS2505-Q1 — 具音訊處理功能的車用 2-W、單聲道、數位或類比輸入 D 類放大器 TAS2521 — 具 miniDSP & 18-mW 單聲道耳機驅動器的 2W、單聲道、數位與類比輸入 D 類音訊放大器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片