首頁 放大器 比較器
首頁
放大器
比較器
最新

TLV4H390-SEP

預覽

航太級強化推拉精密 25µA 四路比較器

立即訂購
產品規格表

TLV4H390-SEP

預覽
產品規格表 立即訂購

產品詳細資料

Number of channels 4 Output type Push-Pull Propagation delay time (µs) 0.1 Vs (max) (V) 5.5 Vs (min) (V) 1.65 Rating Space Features Fail-safe, POR Iq per channel (typ) (mA) 0.016 Vos (offset voltage at 25°C) (max) (mV) 1.5 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 0.005 VICR (max) (V) 5.5 VICR (min) (V) 0
Number of channels 4 Output type Push-Pull Propagation delay time (µs) 0.1 Vs (max) (V) 5.5 Vs (min) (V) 1.65 Rating Space Features Fail-safe, POR Iq per channel (typ) (mA) 0.016 Vos (offset voltage at 25°C) (max) (mV) 1.5 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 0.005 VICR (max) (V) 5.5 VICR (min) (V) 0
SOT-23-THN (DYY) 14 13.692 mm² 4.2 x 3.26
  • VID
    • V62/24636-01XE
    • V62/24636-02XE
  • Radiation - Total Ionizing Dose (TID)
    • TID characterized to 30krad (Si)
    • ELDRS-Free to 30krad (Si)
    • RHA/RLAT to 30krad (Si)
  • Radiation - Single-Event Effects (SEE)
    • SEL Immune to LET = 43MeV·cm 2 /mg
    • SET Characterized to LET = 43MeV·cm 2 /mg
  • Space enhanced plastic
    • Controlled baseline
    • One assembly/test site
    • One fabrication site
    • Extended product life cycle
    • Product traceability
  • 1.65V to 5.5V supply range
  • Precision input offset voltage 300µV
  • Fault-tolerant inputs
  • 100ns typical propagation delay
  • Low quiescent current 25µA per channel
  • Low input bias current 5pA
  • Open-drain output option (TLV4H290-SEP)
  • Push-pull output option (TLV4H390-SEP)
  • Full –55°C to 125°C temperature range
  • 2kV ESD protection
  • VID
    • V62/24636-01XE
    • V62/24636-02XE
  • Radiation - Total Ionizing Dose (TID)
    • TID characterized to 30krad (Si)
    • ELDRS-Free to 30krad (Si)
    • RHA/RLAT to 30krad (Si)
  • Radiation - Single-Event Effects (SEE)
    • SEL Immune to LET = 43MeV·cm 2 /mg
    • SET Characterized to LET = 43MeV·cm 2 /mg
  • Space enhanced plastic
    • Controlled baseline
    • One assembly/test site
    • One fabrication site
    • Extended product life cycle
    • Product traceability
  • 1.65V to 5.5V supply range
  • Precision input offset voltage 300µV
  • Fault-tolerant inputs
  • 100ns typical propagation delay
  • Low quiescent current 25µA per channel
  • Low input bias current 5pA
  • Open-drain output option (TLV4H290-SEP)
  • Push-pull output option (TLV4H390-SEP)
  • Full –55°C to 125°C temperature range
  • 2kV ESD protection

The TLV4H290-SEP and TLV4H390-SEP are quad channel comparators which offer low input offset voltage and an excellent speed-to-power combination with a propagation delay of 100ns. Operating voltage range of 1.65V to 5.5V with a quiescent supply current of 25µA per channel.

This device family includes fault tolerant inputs that allow voltage to be applied to the input pins even when there is no power supply applied to the comparator making them well-suited for applications where power supply sequencing is a challenge. Likewise, these comparators feature no output phase inversion with fault-tolerant inputs that can go up to 6V without damage.

The TLV4H290-SEP comparator has an open-drain output stage that can be pulled below or beyond the supply voltage, making the output appropriate for level translation. The TLV4H390-SEP comparator has a push-pull output stage capable of both sinking and sourcing current.

The TLV4H290-SEP and TLV4H390-SEP are available in a plastic 14-pin SOT-23 package with radiation tolerance up to 43MeV·cm2 /mg.

The TLV4H290-SEP and TLV4H390-SEP are quad channel comparators which offer low input offset voltage and an excellent speed-to-power combination with a propagation delay of 100ns. Operating voltage range of 1.65V to 5.5V with a quiescent supply current of 25µA per channel.

This device family includes fault tolerant inputs that allow voltage to be applied to the input pins even when there is no power supply applied to the comparator making them well-suited for applications where power supply sequencing is a challenge. Likewise, these comparators feature no output phase inversion with fault-tolerant inputs that can go up to 6V without damage.

The TLV4H290-SEP comparator has an open-drain output stage that can be pulled below or beyond the supply voltage, making the output appropriate for level translation. The TLV4H390-SEP comparator has a push-pull output stage capable of both sinking and sourcing current.

The TLV4H290-SEP and TLV4H390-SEP are available in a plastic 14-pin SOT-23 package with radiation tolerance up to 43MeV·cm2 /mg.
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TLV4H290-SEP and TLV4H390-SEP Radiation-Tolerant High-Precision Quad Comparators in Space Enhanced Plastic datasheet (Rev. A) PDF | HTML 2024年 12月 13日
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 2022年 3月 7日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

SURFACE-MOUNT-ADAPTER-EVM — 用於在不同放大器和比較器封裝間轉換的評估模組

SURFACE-MOUNT-ADAPTER-EVM 讓工程師有能力在無需洗板現有電路板的情況下，測試全新的、更小的放大器與比較器封裝。此評估模組 (EVM) 可將最受歡迎的小型封裝轉換為熟悉、更大的體積，如採用 8 針腳、14 針腳和 16 針腳的元件封裝的 SOIC、TSSOP 與 VSSOP。如此可讓工程師在需要調整印刷電路板 (PCB) 佈線圖之前，協助驗證裝置是否能實現設計目標，進而達成省時與省力的目的。完成設計評估後，工程師可使用此 EVM 當作參考，藉以實作可接受較大及較小封裝的雙元件封裝佈線圖，或是透過將較小封裝的佈線圖最佳化以縮小 PCB (...)

使用指南: PDF | HTML
View Options
模擬型號

TLV4H390 PSpice Transient Model

SNOM803.ZIP (47 KB) - PSpice Model
下載
模擬型號

TLV4H390 TINA Model

SNOM802.ZIP (7 KB) - TINA-TI Spice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23-THN (DYY) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片