Home
Design & development

LMX9830-SW

LMX9830 Application Notes, Software, and Tools

Downloads

LMX9830-SW

Downloads

Overview

LMX9830 - Bluetooth Serial Port Module

The LMX9830 integrates a Bluetooth CMOS radio transceiver that delivers the highest level of RF integration available today and a Bluetooth baseband controller with cost efficient ROM memory.

Besides various serial cable replacement applications, the LMX9830 supports all kinds of embedded data and voice oriented Bluetooth applications, by supporting multiple connections with maximum data throughput and synchronous audio links (SCO).

  • Bluetooth 2.0 pre-certified serial port module
  • Easy to use high level command set – for fast application integration
  • Configurable UART speed up to 921.6 kbps
  • Very high data throughput over SPP
  • Point-to-multipoint piconet support
  • LMX9830 offers an automatic slave operation with transparent UART for plug-and-play serial cable applications
  • Includes GAP, SPP, and SDAP
  • ACL and SCO links
  • Small footprint (6 x 9 x 1.2 mm)
  • BGA 60 package, 0.8 mm pitch
  • Embedded Bluetooth stack and profiles – for minimum host processor intrusion
  • Output power Class 2
  • Receiver sensitivity – 81 dBm
  • Low power consumption
LMX9830 Regulatory Compliance
Approval StandardVersionDate
Bluetooth Compliance:
The LMX9830 is qualified for Bluetooth version 2.0		2.012/06

Contents of Zip file:

 FileDescriptionRevisionDate
LMX9830 Core Device DocumentationLMX9830 Software Users Guide (pdf)This document is the complete software reference manual for the LMX9830. It describes in detail the features and command interface of the device, including Audio and profile support.1.302/07
LMX9830 Application NotesLMX9830 Design Checklist (pdf)This document provides guidelines for designing with the LMX9830 Bluetooth? serial port module, particularly for critical aspects of the PCB layout.1.003/06
LMX9830 Bluetooth Device Address Application Note (pdf)This document describes in detail how to request the Bluetooth Device Address (BD_Addr) required for the LMX9830.1.004/06
Bluetooth Certification Application Note (pdf)This document describes in detail the steps required for Bluetooth and regulatory approvals.1.112/05
Antenna Design Application Note (pdf)This application notes gives a generic overview of different antenna design solutions possible to be used with LMX98300.912/05
Simply Blue Embedded Application Note (AN1711) (pdf)This file includes an application note and example code, how to implement the functions in C to control a Simply Blue module. Please see also Embedded Code Examples.Sept. 0709/07
Simply Blue Bluetooth Profile Application Note (AN1707) (pdf)This document explains profile management and profile support for the Simply Blue Bluetooth modulesSept. 0709/07
Embedded Code Examples (zip)This Zip files includes header files and example code for the LMX9830.Sept. 0709/07
LMX9830 UART Buffer Application NoteThis application describes in detail the internal UART buffer management of the LMX9830.1.012/06
LMX9820A to LMX9830 Conversion DocumentThis document provides the overview of changes required to convert a design from LMX9820A to the LMX9830. Further details for each device are contained within the respective datasheets.1.01/06
LMX9830 Firmware PatchesPatch 2 (v2.12)This patch fixes issues in LMX9830 version 2.12 as described in the Firmware Release noteFW 2.1207/06
Patch 10 (v2.12)This patch is as workaround to recover from an EEPROM lockup scenario. This patch should NOT be stored in EEPROM. Please refer to the Firmware Release notes for more information.FW 2.1209/07
Firmware Release NotesThis document describes the known issues, workarounds and patches available for the LMX9830.1.301/07
LMX9830 SoftwareSimply Blue Commander Version 1.6.0.1 (zip)This tool provides the ability to control the LMX9830 over the command interface. All commands are included. A log window reports all commands and events either interpreted or in pure Hex format. The .dir files include all commands up to firmware version 2.12.1.6.0.101/06
Simply Blue Commander User's Guide (pdf)This document discusses the installation and usage of the Simply Blue Commander.1.009/05
SB Smart (zip)Demo application showing the capability of using LMX9830 for SPP, DUN, DUN GW, Voice GW and Headset profile. Pls refer to SB Smart Users Guide for installation and manual.1.3.0.708/06
SB Smart User Guide (pdf)Installation manual and Users Manual for SB Smart1.608/06
LMX9830DONGLELMX9830DONGLE Hardware User GuideHardware user guide for quick setup and board configuration settings.0.610/05
LMX98xx Quick Setup GuideStep-by-step setup guide for LMX9830 Dongle using Simply Blue Commander. Additionally, setup with another node using National Semiconductor USB dongle reference design and IVT stack.1.010/05
LMX9830 Dongle CD Content (zip)Full image of the CD, shipped with LMX9830DONGLE Kit.3.005/06
LMX98xx Quick Setup GuideStep-by-step setup guide for LMX9830 Dongle using Simply Blue Commander. Additionally, setup with another node using National Semiconductor USB dongle reference design and IVT stack.1.010/05
LMX9830 Dongle CD Content (zip)Full image of the CD, shipped with LMX9830DONGLE Kit.3.005/06

For partner products, please refer to our Bluetooth partners for pricing and delivery information:

Bluetooth DeviceDescriptionBluetooth Solution
Puck-I Bluetooth Classic Module - https://katalog.we-online.de/en/wco/WIRL-BTCL
(through Würth Elektronik eiSos)		Bluetooth 1.1 and 2.0 Certified Full serial port modulesIntegrated chip antenna or SMA connectors.

Supported profiles: SPP, DUN, FAX, FTP, HSP, HFP, OPP, SYNC, BIP, BPP UART interface with programmable baud rate

Downloads

Software development kit (SDK)

LMX9830-SW — LMX9830 Application Notes, Software, and Tools

Supported products & hardware

Supported products & hardware

Products
Unassigned wireless connectivity
LMX9830 — Wireless MCU and Smart RF Transceiver Module
Download options

LMX9830-SW — LMX9830 Application Notes, Software, and Tools

close
Latest version
Version: 01.00.00.00
Release date: Apr 23, 2012
open-in-new

View all versions

download

LMX9830 Application Notes, Software, and Tools (zip)  — 29850 K

MD5 checksum
Products
Unassigned wireless connectivity
LMX9830 — Wireless MCU and Smart RF Transceiver Module

Release Information

The design resource accessed as www.ti.com/lit/zip/snwc001 or www.ti.com/lit/xx/snwc001/snwc001.zip has been migrated to a new user experience at www.ti.com/tool/download/SNWC001. Please update any bookmarks accordingly.

Additional resources you might need

Design tool

PLLATINUMSIM-SW — PLLatinum Sim Tool

Supported products & hardware

Supported products & hardware

Products
Clock buffers
CDCDB2000 — DB2000QL compliant 20-output clock buffer for PCIe® Gen 1 to Gen 5 CDCDB400 — 4-output clock buffer for PCIe® Gen 1 to Gen 6 CDCDB800 — 8-output clock buffer for PCIe® Gen 1 to Gen 6 CDCDB803 — 8-output clock buffer for PCIe® Gen 1 to Gen 6 with selectable SMBus addresses CDCLVC1102 — Low jitter, 1:2 LVCMOS fan-out clock buffer CDCLVC1103 — Low jitter, 1:3 LVCMOS fan-out clock buffer CDCLVC1104 — Low jitter, 1:4 LVCMOS fan-out clock buffer CDCLVC1106 — Low jitter, 1:6 LVCMOS fan-out clock buffer CDCLVC1108 — Low jitter, 1:8 LVCMOS fan-out clock buffer CDCLVC1110 — Low jitter, 1:10 LVCMOS fan-out clock buffer CDCLVC1112 — Low jitter, 1:12 LVCMOS fan-out clock buffer CDCLVC1310 — Universal input, 10-output low impedance LVCMOS buffer CDCLVD110A — 1-to-10 LVDS clock buffer up to 1100-MHz with minimum skew for clock distribution CDCLVD1204 — Low jitter, 2-input selectable 1:4 universal-to-LVDS buffer CDCLVD1208 — Low jitter, 2-input selectable 1:8 universal-to-LVDS buffer CDCLVD1212 — Low jitter, 2-input selectable 1:12 universal-to-LVDS buffer CDCLVD1213 — Low jitter, 1:4 universal-to-LVDS buffer with selectable output divider CDCLVD1216 — Low jitter, 2-input selectable 1:16 universal-to-LVDS buffer CDCLVD2102 — Low jitter, dual 1:2 universal-to-LVDS buffer CDCLVD2104 — Low jitter, dual 1:4 universal-to-LVDS buffer CDCLVD2106 — Low jitter, dual 1:6 universal-to-LVDS buffer CDCLVD2108 — Low jitter, dual 1:8 universal-to-LVDS buffer CDCLVP110 — 1:10 LVPECL/HSTL to LVPECL clock driver CDCLVP1102 — Low jitter 1:2 universal-to-LVPECL buffer CDCLVP111 — 1:10 LVPECL buffer with selectable input CDCLVP111-EP — HiRel, 1:10 LVPECL buffer with selectable input CDCLVP111-SP — 1:10 high speed clock buffer with selectable input clock driver CDCLVP1204 — Low-jitter, two-input, selectable 1:4 universal-to-LVPECL buffer CDCLVP1208 — Low jitter, 2-input selectable 1:8 universal-to-LVPECL buffer CDCLVP1212 — Low jitter, 2-input selectable 1:12 universal-to-LVPECL buffer CDCLVP1216 — Low jitter, 2-input selectable 1:16 universal-to-LVPECL buffer CDCLVP2102 — Low jitter, dual 1:2 universal-to-LVPECL buffer CDCLVP2104 — Low jitter, dual 1:4 universal-to-LVPECL buffer CDCLVP2106 — Low jitter, dual 1:6 universal-to-LVPECL buffer CDCLVP2108 — Low jitter, dual 1:8 universal-to-LVPECL buffer CDCLVP215 — Dual 1:5 high speed LVPECL fan out buffer LMK00301 — 3-GHz, 10-output differential fanout buffer / level translator LMK00304 — 3.1-GHz differential clock buffer/level translator with 4 configurable outputs LMK00306 — 3.1-GHz differential clock buffer/level translator with 6 configurable outputs LMK00308 — 3.1-GHz differential clock buffer/level translator with 8 configurable outputs LMK00334 — 4-output PCIe® Gen1/Gen2/Gen3/Gen4/Gen5 clock buffer and level translator LMK00334-Q1 — Automotive 4-output PCIe® Gen1/Gen2/Gen3/Gen4/Gen5 clock buffer and level translator LMK00338 — 8-output PCIe® Gen1/Gen2/Gen3/Gen4/Gen5 clock buffer and level translator LMK1C1102 — 2-channel output LVCMOS 1.8-V buffer LMK1C1103 — 3-channel output LVCMOS 1.8-V buffer LMK1C1104 — 4-channel output LVCMOS 1.8-V buffer LMK1C1106 — 6-channel output LVCMOS 1.8-V buffer LMK1C1108 — 8-channel output LVCMOS 1.8-V buffer LMK1D1204 — 4-channel output LVDS 1.8-V buffer LMK1D1204P — 4-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer with pin control LMK1D1208 — 8-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer LMK1D1208I — 8-channel output, 1.8-V, 2.5-V, and 3.3-V LVDS buffer with I²C LMK1D1208P — 8-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer with pin control LMK1D1212 — 12-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer LMK1D1216 — 16-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer LMK1D2102 — Dual bank 2-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer LMK1D2102L — Low additive jitter LVDS buffer LMK1D2104 — Dual bank 4-channel output 1.8V, 2.5V and 3.3V LVDS buffer LMK1D2104L — Dual bank 4-channel output LVDS 1.8V, 2.5V, and 3.3V buffer with 0.7V output common mode option LMK1D2106 — Dual bank 6-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer LMK1D2106L — Dual bank 2-channel output LVDS 1.8V, 2.5V and 3.3V buffer with 0.7V output common mode option LMK1D2108 — Dual bank 8-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer
Clock generators
LMK03318 — Ultra-low jitter clock generator family with single PLL LMK03328 — Ultra-low jitter clock generator family with two independent PLLs LMK3C0105 — 5 output reference-less clock generator with bulk acoustic wave (BAW) LMK3H0102 — Bulk acoustic wave (BAW)-based PCIe Gen 1 to Gen 6-compliant referenceless clock generator
Clock jitter cleaners
LMK04803 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 1.9-GHz VCO LMK04805 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 2.2-GHz VCO LMK04806 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 2.5-GHz VCO LMK04808 — Low-noise clock jitter cleaner with dual loop PLLs and integrated 2.9-GHz VCO LMK04816 — Three input low-noise clock jitter cleaner with dual loop PLLs LMK04821 — Ultra low jitter synthesizer and jitter cleaner with JESD204B support LMK04826 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 1840 to1970-MHz VCO0 LMK04828 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 2370 to 2630-MHz VCO0. LMK04828-EP — Ultra low-noise JESD204B compliant clock jitter cleaner with temperature range -55 to 105c LMK04832 — Ultra-low-noise, 3.2-GHz, 15-output, JESD204B clock jitter cleaner with dual loop LMK04832-SEP — Radiation-tolerant, 30-krad, ultra-low-noise, 3.2-GHz 15-output JESD204C clock jitter cleaner LMK04832-SP — Radiation-hardened-assured (RHA), ultra-low-noise, 3.2-GHz, 15-output clock jitter cleaner
Oscillators
LMK60A0-148351 — 148.352-MHz, LVDS, high-performance, low jitter, differential oscillator LMK60A0-148M — 148.5-MHz, LVDS, high-performance, low jitter, differential oscillator LMK60E0-156257 — 156.257-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK60E0-156M — 156.5-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK60E0-212M — 212.5-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK60E2-100M — 100.0-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK60E2-125M — 125-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK60E2-150M — 150-MHz, LVPECL, ±50 ppm, low jitter, standard oscillator LMK60E2-156M — 156.25-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK60I2-100M — 100-MHz, HCSL, ±50 ppm, high-performance, low-jitter oscillator LMK60I2-322M — 322.27-MHz, HCSL, ±50 ppm, high-performance, low-jitter oscillator LMK61A2-100M — 100-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-125M — 125-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-156M — 156.25-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-312M — 312.5-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-644M — LVDS ultra-low jitter programmable oscillator with internal EEPROM LMK61E0-050M — 50-MHz, LVPECL ±25 ppm, ultra-low jitter, standard differential oscillator LMK61E0-155M — 155.52-MHz, LVPECL ±25 ppm, ultra-low jitter, standard differential oscillator LMK61E0-156M — 156.25-MHz, ±25 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E07 — Multi-signal format, ultra-low jitter programmable oscillator with internal EEPROM LMK61E08 — Ultra-low jitter programmable oscillator with internal EEPROM LMK61E0M — LVCMOS ultra-low jitter programmable oscillator with internal EEPROM LMK61E2 — 156.250-MHz, ±50 ppm, ultra-low jitter, integrated EEPROM, fully programmable oscillator LMK61E2-100M — 100-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E2-125M — 125-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E2-156M — 156.25-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E2-312M — 312.5-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61I2-100M — 100-MHz, ±50 ppm, HCSL ultra-low jitter standard differential oscillator LMK61PD0A2 — ±50 ppm, ultra-low jitter, pin selectable, differential oscillator LMK62A2-100M — 100-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62A2-150M — 150-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62A2-156M — 156.25-MHz, LVDS ±50 ppm, high-performance, low-jitter oscillator LMK62A2-200M — 200-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62A2-266M — 266.66-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62E0-156M — 156.25-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK62E2-100M — 100-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK62E2-156M — 156.25-MHz, LVPECL, ±50 ppm, high-performance, low jitter, standard oscillator LMK62I0-100M — 100-MHz, HCSL, ±25 ppm, high-performance, low-jitter oscillator LMK62I0-156M — 156.25-MHz, HCSL, ±25 ppm, high-performance, low-jitter oscillator LMK6C — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency LVCMOS oscillator LMK6D — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency LVDS oscillator LMK6H — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency HCSL oscillator LMK6P — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency LVPECL oscillator
Hardware development
Evaluation board
LMK04832EVM — LMK04832 JESD204B Clock Jitter Cleaner/Clock Generator/Distribution Evaluation Module LMX2571EPEVM — LMX2571-EP evaluation module for 1.34-GHz, low-power, extreme-temperature RF synthesizer LMX2594PSEVM — LMX2594 evaluation module for 15-GHz RF synthesizer with multiple-device phase synchronization XMICR-3P-LMX2492 — LMX2492 X-MWblock evaluation modules XMICR-3P-LMX2572 — LMX2572 X-MWblock evaluation modules XMICR-3P-LMX2592 — LMX2592 X-MWblock evaluation modules XMICR-3P-LMX2594 — LMX2594 X-MWblock evaluation modules XMICR-3P-LMX2595 — LMX2595 X-MWblock evaluation modules
Download options

PLLATINUMSIM-SW — PLLatinum Sim Tool

close
Latest version
Version: 1.6.8
Release date: Dec 26, 2024
open-in-new

Release notes

open-in-new

View all versions

lock

Setup_PLLatinumSim-1.6.8.exe  — 9016 K

MD5 checksum
lock = Requires export approval (1 minute)
Products
Clock buffers
CDCDB2000 — DB2000QL compliant 20-output clock buffer for PCIe® Gen 1 to Gen 5 CDCDB400 — 4-output clock buffer for PCIe® Gen 1 to Gen 6 CDCDB800 — 8-output clock buffer for PCIe® Gen 1 to Gen 6 CDCDB803 — 8-output clock buffer for PCIe® Gen 1 to Gen 6 with selectable SMBus addresses CDCLVC1102 — Low jitter, 1:2 LVCMOS fan-out clock buffer CDCLVC1103 — Low jitter, 1:3 LVCMOS fan-out clock buffer CDCLVC1104 — Low jitter, 1:4 LVCMOS fan-out clock buffer CDCLVC1106 — Low jitter, 1:6 LVCMOS fan-out clock buffer CDCLVC1108 — Low jitter, 1:8 LVCMOS fan-out clock buffer CDCLVC1110 — Low jitter, 1:10 LVCMOS fan-out clock buffer CDCLVC1112 — Low jitter, 1:12 LVCMOS fan-out clock buffer CDCLVC1310 — Universal input, 10-output low impedance LVCMOS buffer CDCLVD110A — 1-to-10 LVDS clock buffer up to 1100-MHz with minimum skew for clock distribution CDCLVD1204 — Low jitter, 2-input selectable 1:4 universal-to-LVDS buffer CDCLVD1208 — Low jitter, 2-input selectable 1:8 universal-to-LVDS buffer CDCLVD1212 — Low jitter, 2-input selectable 1:12 universal-to-LVDS buffer CDCLVD1213 — Low jitter, 1:4 universal-to-LVDS buffer with selectable output divider CDCLVD1216 — Low jitter, 2-input selectable 1:16 universal-to-LVDS buffer CDCLVD2102 — Low jitter, dual 1:2 universal-to-LVDS buffer CDCLVD2104 — Low jitter, dual 1:4 universal-to-LVDS buffer CDCLVD2106 — Low jitter, dual 1:6 universal-to-LVDS buffer CDCLVD2108 — Low jitter, dual 1:8 universal-to-LVDS buffer CDCLVP110 — 1:10 LVPECL/HSTL to LVPECL clock driver CDCLVP1102 — Low jitter 1:2 universal-to-LVPECL buffer CDCLVP111 — 1:10 LVPECL buffer with selectable input CDCLVP111-EP — HiRel, 1:10 LVPECL buffer with selectable input CDCLVP111-SP — 1:10 high speed clock buffer with selectable input clock driver CDCLVP1204 — Low-jitter, two-input, selectable 1:4 universal-to-LVPECL buffer CDCLVP1208 — Low jitter, 2-input selectable 1:8 universal-to-LVPECL buffer CDCLVP1212 — Low jitter, 2-input selectable 1:12 universal-to-LVPECL buffer CDCLVP1216 — Low jitter, 2-input selectable 1:16 universal-to-LVPECL buffer CDCLVP2102 — Low jitter, dual 1:2 universal-to-LVPECL buffer CDCLVP2104 — Low jitter, dual 1:4 universal-to-LVPECL buffer CDCLVP2106 — Low jitter, dual 1:6 universal-to-LVPECL buffer CDCLVP2108 — Low jitter, dual 1:8 universal-to-LVPECL buffer CDCLVP215 — Dual 1:5 high speed LVPECL fan out buffer LMK00301 — 3-GHz, 10-output differential fanout buffer / level translator LMK00304 — 3.1-GHz differential clock buffer/level translator with 4 configurable outputs LMK00306 — 3.1-GHz differential clock buffer/level translator with 6 configurable outputs LMK00308 — 3.1-GHz differential clock buffer/level translator with 8 configurable outputs LMK00334 — 4-output PCIe® Gen1/Gen2/Gen3/Gen4/Gen5 clock buffer and level translator LMK00334-Q1 — Automotive 4-output PCIe® Gen1/Gen2/Gen3/Gen4/Gen5 clock buffer and level translator LMK00338 — 8-output PCIe® Gen1/Gen2/Gen3/Gen4/Gen5 clock buffer and level translator LMK1C1102 — 2-channel output LVCMOS 1.8-V buffer LMK1C1103 — 3-channel output LVCMOS 1.8-V buffer LMK1C1104 — 4-channel output LVCMOS 1.8-V buffer LMK1C1106 — 6-channel output LVCMOS 1.8-V buffer LMK1C1108 — 8-channel output LVCMOS 1.8-V buffer LMK1D1204 — 4-channel output LVDS 1.8-V buffer LMK1D1204P — 4-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer with pin control LMK1D1208 — 8-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer LMK1D1208I — 8-channel output, 1.8-V, 2.5-V, and 3.3-V LVDS buffer with I²C LMK1D1208P — 8-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer with pin control LMK1D1212 — 12-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer LMK1D1216 — 16-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer LMK1D2102 — Dual bank 2-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer LMK1D2102L — Low additive jitter LVDS buffer LMK1D2104 — Dual bank 4-channel output 1.8V, 2.5V and 3.3V LVDS buffer LMK1D2104L — Dual bank 4-channel output LVDS 1.8V, 2.5V, and 3.3V buffer with 0.7V output common mode option LMK1D2106 — Dual bank 6-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer LMK1D2106L — Dual bank 2-channel output LVDS 1.8V, 2.5V and 3.3V buffer with 0.7V output common mode option LMK1D2108 — Dual bank 8-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer
Clock generators
LMK03318 — Ultra-low jitter clock generator family with single PLL LMK03328 — Ultra-low jitter clock generator family with two independent PLLs LMK3C0105 — 5 output reference-less clock generator with bulk acoustic wave (BAW) LMK3H0102 — Bulk acoustic wave (BAW)-based PCIe Gen 1 to Gen 6-compliant referenceless clock generator
Clock jitter cleaners
LMK04803 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 1.9-GHz VCO LMK04805 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 2.2-GHz VCO LMK04806 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 2.5-GHz VCO LMK04808 — Low-noise clock jitter cleaner with dual loop PLLs and integrated 2.9-GHz VCO LMK04816 — Three input low-noise clock jitter cleaner with dual loop PLLs LMK04821 — Ultra low jitter synthesizer and jitter cleaner with JESD204B support LMK04826 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 1840 to1970-MHz VCO0 LMK04828 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 2370 to 2630-MHz VCO0. LMK04828-EP — Ultra low-noise JESD204B compliant clock jitter cleaner with temperature range -55 to 105c LMK04832 — Ultra-low-noise, 3.2-GHz, 15-output, JESD204B clock jitter cleaner with dual loop LMK04832-SEP — Radiation-tolerant, 30-krad, ultra-low-noise, 3.2-GHz 15-output JESD204C clock jitter cleaner LMK04832-SP — Radiation-hardened-assured (RHA), ultra-low-noise, 3.2-GHz, 15-output clock jitter cleaner
Oscillators
LMK60A0-148351 — 148.352-MHz, LVDS, high-performance, low jitter, differential oscillator LMK60A0-148M — 148.5-MHz, LVDS, high-performance, low jitter, differential oscillator LMK60E0-156257 — 156.257-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK60E0-156M — 156.5-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK60E0-212M — 212.5-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK60E2-100M — 100.0-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK60E2-125M — 125-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK60E2-150M — 150-MHz, LVPECL, ±50 ppm, low jitter, standard oscillator LMK60E2-156M — 156.25-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK60I2-100M — 100-MHz, HCSL, ±50 ppm, high-performance, low-jitter oscillator LMK60I2-322M — 322.27-MHz, HCSL, ±50 ppm, high-performance, low-jitter oscillator LMK61A2-100M — 100-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-125M — 125-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-156M — 156.25-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-312M — 312.5-MHz, ±50 ppm, LVDS ultra-low jitter standard differential oscillator LMK61A2-644M — LVDS ultra-low jitter programmable oscillator with internal EEPROM LMK61E0-050M — 50-MHz, LVPECL ±25 ppm, ultra-low jitter, standard differential oscillator LMK61E0-155M — 155.52-MHz, LVPECL ±25 ppm, ultra-low jitter, standard differential oscillator LMK61E0-156M — 156.25-MHz, ±25 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E07 — Multi-signal format, ultra-low jitter programmable oscillator with internal EEPROM LMK61E08 — Ultra-low jitter programmable oscillator with internal EEPROM LMK61E0M — LVCMOS ultra-low jitter programmable oscillator with internal EEPROM LMK61E2 — 156.250-MHz, ±50 ppm, ultra-low jitter, integrated EEPROM, fully programmable oscillator LMK61E2-100M — 100-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E2-125M — 125-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E2-156M — 156.25-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61E2-312M — 312.5-MHz, ±50 ppm, LVPECL ultra-low jitter standard differential oscillator LMK61I2-100M — 100-MHz, ±50 ppm, HCSL ultra-low jitter standard differential oscillator LMK61PD0A2 — ±50 ppm, ultra-low jitter, pin selectable, differential oscillator LMK62A2-100M — 100-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62A2-150M — 150-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62A2-156M — 156.25-MHz, LVDS ±50 ppm, high-performance, low-jitter oscillator LMK62A2-200M — 200-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62A2-266M — 266.66-MHz, LVDS ±50 ppm, high-performance, low-jitter, standard oscillator LMK62E0-156M — 156.25-MHz, LVPECL, ±25 ppm, high-performance, low-jitter oscillator LMK62E2-100M — 100-MHz, LVPECL, ±50 ppm, high-performance, low-jitter oscillator LMK62E2-156M — 156.25-MHz, LVPECL, ±50 ppm, high-performance, low jitter, standard oscillator LMK62I0-100M — 100-MHz, HCSL, ±25 ppm, high-performance, low-jitter oscillator LMK62I0-156M — 156.25-MHz, HCSL, ±25 ppm, high-performance, low-jitter oscillator LMK6C — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency LVCMOS oscillator LMK6D — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency LVDS oscillator LMK6H — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency HCSL oscillator LMK6P — Low-jitter, high-performance, bulk-acoustic-wave (BAW) fixed-frequency LVPECL oscillator
Hardware development
Evaluation board
LMK04832EVM — LMK04832 JESD204B Clock Jitter Cleaner/Clock Generator/Distribution Evaluation Module LMX2571EPEVM — LMX2571-EP evaluation module for 1.34-GHz, low-power, extreme-temperature RF synthesizer LMX2594PSEVM — LMX2594 evaluation module for 15-GHz RF synthesizer with multiple-device phase synchronization XMICR-3P-LMX2492 — LMX2492 X-MWblock evaluation modules XMICR-3P-LMX2572 — LMX2572 X-MWblock evaluation modules XMICR-3P-LMX2592 — LMX2592 X-MWblock evaluation modules XMICR-3P-LMX2594 — LMX2594 X-MWblock evaluation modules XMICR-3P-LMX2595 — LMX2595 X-MWblock evaluation modules

Release Information

Bug fixes

What's new

  • Added LMK6H/D/C/P family of oscillators
  • Added LMK61 oscillator
  • Added LMK3H oscillator
  • Added LMX1205

Technical documentation

No results found. Please clear your search and try again.
View all 1
Type Title Date
Application note AN-1811 Bluetooth Antenna Design (Rev. B) May 6, 2013

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support.