Home Power management Power switches High-side switches
Home
Power management
Power switches
High-side switches
NEW

TPS1214-Q1

PREVIEW

Automotive high-side switch controller with low IQ, low power mode, load wakeup, I²t and diagnostics

Order now
Data sheet

TPS1214-Q1

PREVIEW
Data sheet Order now

Product details

Number of channels 1 Operating voltage (max) (V) 40 Operating voltage (min) (V) 3.5 Current sense accuracy +/-2% at 30-mV VSNS FET External Features Adjustable current limit, Automatic load wake-up, Automotive load dump compatibility, Current monitoring, Precharge FET driver, Short circuit protection Operating temperature range (°C) -40 to 125 Rating Automotive
Number of channels 1 Operating voltage (max) (V) 40 Operating voltage (min) (V) 3.5 Current sense accuracy +/-2% at 30-mV VSNS FET External Features Adjustable current limit, Automatic load wake-up, Automotive load dump compatibility, Current monitoring, Precharge FET driver, Short circuit protection Operating temperature range (°C) -40 to 125 Rating Automotive
VQFN (RGE) 23 16 mm² 4 x 4

  • AEC-Q100 automotive qualified for grade 1 temperature
  • 3.5V to 73V input range (74V absolute maximum)
  • Reverse input protection down to –65V
    • TPS12141-Q1 with reverse FET ON (–45V)
  • Integrated 12V charge pump
  • Low IQ = 20µA in low power mode (LPM = Low)
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Dual gate drive: GATE: 0.5A source and 2A sink G: 100µA source and 0.39A sink
  • Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
  • Accurate and fast (5µs) short-circuit protection
  • Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
  • Accurate analog current monitor output (IMON): ±2% at 30mV VSNS
  • NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
  • Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO
  • TPS12142-Q1 (RPP turn OFF), TPS12143-Q1 (RPP turn ON) with I2t disabled
  • Accurate and adjustable undervoltage lockout (UVLO)
  • Short-circuit comparator diagnosis (SCP_TEST)

  • AEC-Q100 automotive qualified for grade 1 temperature
  • 3.5V to 73V input range (74V absolute maximum)
  • Reverse input protection down to –65V
    • TPS12141-Q1 with reverse FET ON (–45V)
  • Integrated 12V charge pump
  • Low IQ = 20µA in low power mode (LPM = Low)
  • Low 1µA shutdown current (EN/UVLO = Low)
  • Dual gate drive: GATE: 0.5A source and 2A sink G: 100µA source and 0.39A sink
  • Accurate I2t overcurrent protection (IOC) with adjustable circuit breaker timer (I2t)
  • Accurate and fast (5µs) short-circuit protection
  • Fast transition (5µs) from low power mode to active mode using adjustable load wakeup threshold or LPM trigger with WAKE indication
  • Accurate analog current monitor output (IMON): ±2% at 30mV VSNS
  • NTC based overtemperature sensing (TMP) and monitoring output (ITMPO)
  • Fault indication (FLT) during short circuit fault, I2t, charge pump UVLO
  • TPS12142-Q1 (RPP turn OFF), TPS12143-Q1 (RPP turn ON) with I2t disabled
  • Accurate and adjustable undervoltage lockout (UVLO)
  • Short-circuit comparator diagnosis (SCP_TEST)

TPS1214-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 73V and a 74V absolute maximum rating the device is suitable for 12V, 24V, and 48V automotive system designs.

It has two integrated gate drives with 0.5A source and 2A sink (GATE) and 100µA source and 0.39A sink (G). With LPM Low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). Auto load wakeup threshold adjusted using RBYPASS resistor placed across CS2+ and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.

The device has accurate current sensing (±2%) output (IMON) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.

The TPS1214-Q1 is available in 23-pin VQFN package.

TPS1214-Q1 is a family of low IQ smart high side drivers with protection and diagnostics. With wide operating voltage range of 3.5V to 73V and a 74V absolute maximum rating the device is suitable for 12V, 24V, and 48V automotive system designs.

It has two integrated gate drives with 0.5A source and 2A sink (GATE) and 100µA source and 0.39A sink (G). With LPM Low, the low power path is kept ON and the main FETs are turned OFF with IQ of 20µA (typ). Auto load wakeup threshold adjusted using RBYPASS resistor placed across CS2+ and CS2–. IQ reduces to 1µA (typ) with EN/UVLO low.

The device has accurate current sensing (±2%) output (IMON) with adjustable I2t based overcurrent and short circuit protection using an external RSNS resistor and FLT indication. Auto-retry and latch-off fault behavior can be configured. The device also has NTC based temperature sensing (TMP) and monitoring output (ITMPO) output for overtemperature detection of external FETs.

The TPS1214-Q1 is available in 23-pin VQFN package.
filter Find other High-side switches
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TPS1214-Q1 Low IQ Automotive High Side Switch Controller With Low Power Mode, Load Wakeup, I2 t, and Diagnostics datasheet PDF | HTML 24 Sep 2024
Functional safety information TPS1214-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 24 Sep 2024
EVM User's guide TPS1214-Q1 Evaluation Module for Smart High-Side Driver User's Guide PDF | HTML 06 Sep 2024

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS1214Q1EVM — TPS1214x-Q1 evaluation module

The TPS1214x-Q1 evaluation module (EVM) allows reference circuit evaluation of the TPS1214-Q1 smart high-side driver. The EVM allows for full configuration of the highside driver as well as various parameters such as overcurrent protection, short-circuit protection, as well as configurable I2t (...)

User guide: PDF | HTML
Not available on TI.com
Calculation tool

FET-INRUSH-SOA-CALC — FET SOA margin calculator for dvdt based startup

The design calculator allows user to estimate the FET SOA margin while starting up with dVdt based startup for inrush current control
Supported products & hardware

Supported products & hardware

Products
Ideal diode/ORing controllers
LM7481-Q1 — Automotive ideal diode controller with active rectification driving B2B NFETs LM7481 — 3-V to 65-V back-to-back NFET ideal diode controller with high gate drive, -55°C to 125°C LM74502-Q1 — Automotive reverse polarity protection controller, overvoltage protection, gate drive strength 60 μA LM74502 — 3.2-V to 65-V industrial RPP controller with load disconnect and OVP LM74502H — 3.2-V to 65-V industrial RPP controller with load disconnect, OVP, and high gate drive LM74502H-Q1 — Automotive reverse polarity protection controller, overvoltage protection, gate drive strength 11 mA LM74720-Q1 — Automotive, low IQ ideal diode controller with active rectification and load dump protection LM74721-Q1 — Automotive, TVS less low IQ reverse battery protection ideal diode controller, active rectification LM74722-Q1 — Automotive, low IQ ideal diode controller with 200-khz active rectification and load dump protection LM7480-Q1 — 3-V to 65-V, automotive ideal diode controller driving back to back NFETs LM7480 — 3-V to 65-V back-to-back NFET ideal diode controller, -55°C to 125°C
High-side switch controllers
TPS4800-Q1 — Automotive 100-V low IQ high side driver with protection and diagnostics TPS4810-Q1 — Automotive, 100V low IQ dual high-side driver with short circuit protection and diagnostics TPS4811-Q1 — Automotive 3.5V to 100V high-side driver with protection and diagnostics TPS1200-Q1 — Automotive 45-V low IQ high side driver with protection and diagnostics TPS1210-Q1 — Automotive 45-V low IQ dual high-side driver with short circuit protection and diagnostics TPS1211-Q1 — Automotive 3.5V to 45V high-side driver with protection and diagnostics TPS1213-Q1 — Automotive 45V low IQ high-side driver with low power mode and adjustable short circuit protection
High-side switches
TPS1214-Q1 — Automotive high-side switch controller with low IQ, low power mode, load wakeup, I²t and diagnostics
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
VQFN (RGE) 23 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos