Gehäuseinformationen
| Gehäuse | Pins CFP (HSL) (HKX) | 8 |
| Betriebstemperaturbereich (°C) 25 to 25 |
| Gehäusemenge | Träger 25 | TUBE |
Merkmale von INA901-SP
- 5962-1821001
- Radiation Hardness Assured (RHA)
50 krad(Si) at Low Dose Rate - Single Event Latch-up (SEL)
Immune to 75 MeV-cm2/mg at 125 °C - Qualified Over the Military
Temperature Range (–55 °C to 125 °C) - High-Performance 8-Pin
Ceramic Flat Pack Package (HKX)
- Radiation Hardness Assured (RHA)
- Wide Common-Mode Range: –15 V to 65 V
- CMRR: 120 dB
- Accuracy:
- ±0.5-mV Offset
- ±0.2% Gain Error
- 2.5-µV/°C Offset Drift
- 50-ppm/°C Gain Drift
- Bandwidth: Up to 130 kHz
- Gain: 20 V/V
- Quiescent Current: 700 µA
- Power Supply: 2.7 V to 16 V
- Provision for Filtering
Beschreibung von INA901-SP
The INA901-SP is a voltage-output, current-sense amplifier that can sense drops across shunt resistors at common-mode voltages from –15 V to 65 V, independent of the supply voltage. The INA901-SP operates from a single 2.7-V to 16-V supply, drawing 700 µA (typical) of supply current.
The gain of the INA901-SP is 20 V/V. The 130-kHz bandwidth simplifies use in current-control loops. The pinouts readily enable filtering.
The device is specified over the extended operating temperature range of –55 °C to 125 °C and is offered in an 8-pin CFP package.