SM72480

AKTIV

1,6-V-, LLP-6 werkseitig voreingestellter Temperaturschalter und Temperatursensor

Jetzt bestellen

Datenblatt

document-pdfAcrobat 1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor datasheet (Rev. C) (Englisch)

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität

LM26LV

AKTIV

Werkseitig voreingestellter Auslösepunkt-Temperaturschalter (±3°C) mit Analogausgang, &plu Additional trip-point options, ranging from 50°C to 150°C

SM72480

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Setpoint type

Factory Programmed

Setpoint value (°C)

105, 120, 125

Operating temperature range (°C)

-50 to 150

Accuracy over temp range (max) (°C)

2.3

Sensor gain (mV/°C)

-10.3, -7.7

Output type

Open drain, Push Pull

Supply voltage (min) (V)

1.6

Supply voltage (max) (V)

5.5

Supply current (typ) (µA)

8

Number of comparator channels

1

Rating

Automotive, Catalog

Interface type

Analog output, Switch

Setpoint type

Factory Programmed

Setpoint value (°C)

105, 120, 125

Operating temperature range (°C)

-50 to 150

Accuracy over temp range (max) (°C)

2.3

Sensor gain (mV/°C)

-10.3, -7.7

Output type

Open drain, Push Pull

Supply voltage (min) (V)

1.6

Supply voltage (max) (V)

5.5

Supply current (typ) (µA)

8

Number of comparator channels

1

Rating

Automotive, Catalog

Interface type

Analog output, Switch

WSON (NGF)

6

5.5 mm² 2.5 x 2.2

Renewable Energy Grade
Low 1.6V Operation
Latching Function: Device Can Latch the Over Temperature Condition
Push-pull and Open-Drain Temperature Switch Outputs
Very Linear Analog V_TEMP Temperature Sensor Output
V_TEMP Output Short-circuit Protected
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection

Key Specifications

Supply Voltage 1.6V to 5.5V
Supply Current 8 μA (typ)
Accuracy, Trip Point Temperature 0°C to 150°C ±2.2°C
Accuracy, VTEMP 0°C to 150°C ±2.3°C
VTEMP Output Drive ±100 μA
Operating Temperature −50°C to 150°C
Hysteresis Temperature 4.5°C to 5.5°C

All trademarks are the property of their respective owners.

Renewable Energy Grade
Low 1.6V Operation
Latching Function: Device Can Latch the Over Temperature Condition
Push-pull and Open-Drain Temperature Switch Outputs
Very Linear Analog V_TEMP Temperature Sensor Output
V_TEMP Output Short-circuit Protected
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection

Key Specifications

Supply Voltage 1.6V to 5.5V
Supply Current 8 μA (typ)
Accuracy, Trip Point Temperature 0°C to 150°C ±2.2°C
Accuracy, VTEMP 0°C to 150°C ±2.3°C
VTEMP Output Drive ±100 μA
Operating Temperature −50°C to 150°C
Hysteresis Temperature 4.5°C to 5.5°C

All trademarks are the property of their respective owners.

The SM72480 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (T_TRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (T_HYST) keeps the output stable in an environment of temperature instability.

In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds T_TRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (T_TRIP − T_HYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure.

The analog output, V_TEMP, delivers an analog output voltage with Negative Temperature Coefficient — NTC.

Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the V_TEMP output pin, which could be used to verify the temperature trip point.

The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.

The SM72480 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (T_TRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (T_HYST) keeps the output stable in an environment of temperature instability.

In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds T_TRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (T_TRIP − T_HYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure.

The analog output, V_TEMP, delivers an analog output voltage with Negative Temperature Coefficient — NTC.

Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the V_TEMP output pin, which could be used to verify the temperature trip point.

The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.

filter

Andere Temperaturschalter suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor datasheet (Rev. C)		05 Apr 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.