AMC0386
- Integrated, high-voltage resistive divider for direct AC or DC voltage sensing without external resistors
- Better than 1% accuracy over temperature and lifetime without system-level calibration
- Supply voltage range:
- High-side (AVDD): 3.0V to 5.5V
- Low-side (DVDD): 2.7V to 5.5V
- Low DC errors:
- Offset error: ±0.9mV (maximum)
- Offset drift: ±7µV/°C (maximum)
- Attenuation error: ±0.25% (maximum)
- Attenuation drift: ±30ppm/°C (maximum)
- High CMTI: 150V/ns (minimum)
- Missing high-side supply detection
- Low EMI: Meets CISPR-11 and CISPR-25 limits
- Available input options:
- AMC0386M06: ±600V, 10MΩ
- AMC0386M10: ±1000V, 12.5MΩ
- Safety-related certifications:
- 7000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 5000VRMS isolation for 1 minute per UL1577
- Fully specified over the extended industrial temperature range: –40°C to +125°C
The AMC0386 is a precision, galvanically isolated delta-sigma (ΔΣ) modulator with a high-voltage, high impedance input, and external clock. The input is designed to connect directly to a high-voltage signal source.
The isolation barrier separates parts of the system that operate on different common-mode voltage levels. The isolation barrier is highly resistant to magnetic interference and is certified to provide reinforced isolation of up to 5kVRMS (60s).
The output bitstream of the AMC0386 is synchronized to an external clock. Combined with a sinc3, OSR 256 filter, the device achieves 14.8 effective bits of resolution or 89dB of dynamic range, at a sample rate of 39kSPS.
With the integrated resistive divider, excellent DC accuracy, low temperature drift and high stability, the AMC0386 achieves better than 1% accuracy over lifetime and temperature without system-level calibration.
The AMC0386 is available in a 15-pin, 0.65mm pitch SSOP package and is fully specified over the temperature range from –40°C to +125°C.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMC038XEVM — AMC038x 평가 모듈
AMC038x 평가 모듈(EVM)은 AMC038x 장치 중 하나와 함께 고정밀 고전압 감지 설계를 시연합니다. 이 평가 모듈은 외부 전압 배당 저항이 필요 없이 최대 1600V 입력 전압을 측정할 수 있습니다. 또한 이 설계에는 저압측 전원에서 고압측 전원을 생성하는 개별 전원 솔루션이 포함되어 있습니다.
DIYAMC-0-EVM — 범용 DIY(Do-it-Yourself) 절연 증폭기 및 변조기 평가 모듈
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
SSOP (DFX) | 15 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.