TPS62184
- Dual Phase Balanced Peak Current Mode
- Input Voltage Range: 4 V to 17 V
- Output Voltage:
- 0.9 V ≤ VOUT ≤ 1.8 V (6A),
- 1.8 V ≤ VOUT ≤ 2.5 V (5.5A)
- 2.5 V ≤ VOUT ≤ 3.5 V (5A)
- Typical Quiescent Current of 28 µA
- Output Voltage Accuracy of ±1% (PWM Mode)
- Automatic Efficiency Enhancement (AEE™)
- Phase Shifted Operation
- Automatic Power Save Mode
- Adjustable Soft Start
- Power Good Output
- Undervoltage Lockout
- HICCUP Over Current Protection
- Over Temperature Protection
- Pin to Pin Compatible with TPS62180/2
- NanoFree™ 2.10 mm × 3.10 mm DSBGA Package
The TPS62184 is a synchronous dual-phase step-down DC-DC converter for low profile power rails. It operates with two identical, current balanced phases that are peak current controlled enabling use in height limited applications.
With a wide operating input voltage range of 4 V to 17 V, the device is ideally suited for systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A is continuously provided by two phases of 3 A each, allowing the use of low profile external components. The phases operate out of phase, reducing switching noise significantly.
The TPS62184 automatically enters Power Save Mode to maintain high efficiency down to very light loads. It also incorporates an Automatic Efficiency Enhancement (AEE™) for the entire duty cycle range.
The device features a Power Good signal, as well as an adjustable soft start. The quiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cycle limitation even at lowest output voltage.
The TPS62184 is packaged in a small 24-bump, 0.5 mm pitch DSBGA package.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62184EVM-581 — 자동 효율성 개선(AEE TM)을 지원하는 17V 입력, 6A 출력, 2상 스텝다운 컨버터
The TPS62184EVM-581 (PWR581-002) facilitates the evaluation of the TPS62184 6-A, 2-phase buck converter. The EVM outputs a 1.8-V output voltage from input voltages between 4V and 17V. The TPS62184 features Automatic Efficiency Enhancement (AEE™) to deliver efficiencies in excess (...)
PMP11438 — 6A 이상의 부하 전류에서 12V에서 1.2V로 변환하는 3가지 벅 컨버터 회로 레퍼런스 디자인
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
DSBGA (YZF) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치