TSM24CA
- Protection against 1kV, 42Ω IEC 61000-4-5 surges for automotive signal lines
- Robust surge protection:
- IEC 61000-4-5 (8/20µs): 30A
- Low clamping voltage of 40V at 24A for 8/20µs surge current protects downstream components
- Bidirectional polarity to support positive and negative voltage swings and miswiring conditions
- ± 24V working voltage for protecting signals on 12V systems
- Low I/O Capacitance: 12pF (typical)
- Low leakage current of 75nA (maximum)
- Integrated IEC 61000-4-2 ESD protection:
- ±30kV contact discharge
- ±30kV air-gap discharge
- Small SOT-23 leaded package to minimize board space and allow for automatic optical inspection (AOI)
The TSM24CA is a low-capacitance TVS diode and is part of TI’s surge protection device family. The TSM24CA robustly shunts up to 30A of IEC 61000-4-5 (8/20 µs) fault current to protect systems from high power transients or lightning strikes. The device offers a solution to the common industrial signal line EMC requirement to survive up to 1kV IEC 61000-4-5 open circuit voltage coupled through a 42Ω impedance, clamping that surge at 40V (I PP = 24A). The TSM24CA also has a very low line capacitance of 12pF which allows it to protect common automotive communication networks like CAN from surges in EV charging applications.
Additionally, the TSM24CA is available in a small leaded SOT-23 (DBZ) package which is reduced in size by approximately 50 percent compared to the industry standard SMA package. The extremely low device leakage and capacitance provide a minimal effect on the protected line.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ESDEVM — ESD 평가 모듈
TIDA-01606 — 11kW, 양방향 3상 3레벨(T형) 인버터 및 PFC 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.
