지원 소프트웨어
TUSS4440
- Integrated driver for transformer driven transducers and receiver stage with analog output for ultrasound applications
- 86-dB input dynamic range analog front-end
- First stage low noise amplifier adjustable to 10, 12.5, 15 and 20 V/V
- Configurable bandpass filter from 40 KHz to 500 KHz
- Wide-band logarithmic amplifier
- Supported transducer frequencies (controlled by external clock)
- 40 KHz to 400 KHz
- For low-power applications
- Standby mode: 1.7 mA (typical)
- Sleep mode: 220 µA (typical)
- Configurable drive stage:
- Complimentary low-side drivers with current limit for transformer based transducer excitation
- Configurable burst patterns using IO1 and IO2 pins
- Outputs:
- Voltage output of the demodulated echo envelope on VOUT
- Input signal zero crossing comparator output on OUT3 pin
- Programmable VOUT threshold crossing on OUT4 pin
- Serial Peripheral Interface (SPI) for configuration by microcontroller (MCU)
The TUSS4440 is a highly integrated transformer drive analog front end for industrial ultrasonic applications. The transducer drive stage consists of low-side complementary drivers that can be configured to drive an ultrasonic transducer through a step-up transformer. The device delivers constant current to the primary side of the transformer.
The receive signal path includes a low-noise linear amplifier, a bandpass filter, followed by a logarithmic gain amplifier for input dependent amplification. The logarithmic amplifier allows for high sensitivity for weak echo signals and offers excellent input dynamic range over full range of reflected echoes.
The drivers can be controlled directly through the microcontroller for complete customization of the burst signal, or can be programmed through SPI with a customizable burst length. The TUSS4440 can support a single transducer to send and receive burst signals, or can set up two transducers to split the send and receive functions.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TUSS4440 Transformer Drive Ultrasonic Sensor IC With Logarithmic Amplifier datasheet (Rev. A) | PDF | HTML | 2022/05/19 |
| Application note | Ultrasonic Sensing Basics (Rev. D) | PDF | HTML | 2021/12/02 | |
| Technical article | Shrink your solution size with transformer-less ultrasonic ICs | PDF | HTML | 2020/06/15 | |
| User guide | TUSS44x0 EVM for Ultrasonic Sensors User's Guide (Rev. A) | 2020/04/02 | ||
| Application note | TUSS44x0 Software Development Guide | PDF | HTML | 2020/03/17 | |
| Application note | Logarithmic Amplifier for Ultrasonic Sensor Signal Conditioning | 2020/03/13 | ||
| E-book | E-book: An engineer’s guide to industrial robot designs | 2020/02/12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
BOOSTXL-TUSS4440 — LDO 평가 모듈이 포함된 TUSS4440 변압기 구동식 초음파 변환기
The TUSS4440 EVM is a collective of the BOOSTXL-TUSS4440 and MSP-EXP430F5529LP, which enables users to fully evaluate the TUSS4440 ultrasonic sensor signal conditioner and transformer driver. Transducer compatibility is expanded to open- or closed-top transducers operating between 30 to 500 kHz. (...)
사용 설명서: PDF
거버(Gerber) 파일
Transformer-Drive Ultrasonic Proximity Sensing Module Design Files (TUSS4440PSM)
SLDC024.ZIP (4505 KB)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTJ) | 20 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.