홈 전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)
홈
전원 관리
AC/DC 및 DC/DC 컨트롤러(외장 FET)

UCC29002

활성

고급 8핀 부하 공유 컨트롤러, -40°C~105°C

지금 주문
데이터 시트

UCC29002

활성
데이터 시트 지금 주문

제품 상세 정보

Vin (max) (V) 14.25 Operating temperature range (°C) -40 to 105 Control mode Current Topology Buck, Flyback Rating Catalog Features 1% accuracy, Intel SSI load share specification compliant, Load Sharing, high-side or Low-side current sense
Vin (max) (V) 14.25 Operating temperature range (°C) -40 to 105 Control mode Current Topology Buck, Flyback Rating Catalog Features 1% accuracy, Intel SSI load share specification compliant, Load Sharing, high-side or Low-side current sense
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • High accuracy; capable of < 1% current-share error at full load
  • High-side or low-side (GND-referenced) current-sense capability
  • Ultra-low offset current-sense amplifier
  • Single-wire load-share bus
  • Full scale adjustability
  • Intel SSI load-share specification compliant
  • Disconnect from load-share bus at stand-by
  • Load-share bus protection against shorts to GND or to the supply rail
  • 8-pin VSSOP package minimizes space
  • Lead-free assembly
  • High accuracy; capable of < 1% current-share error at full load
  • High-side or low-side (GND-referenced) current-sense capability
  • Ultra-low offset current-sense amplifier
  • Single-wire load-share bus
  • Full scale adjustability
  • Intel SSI load-share specification compliant
  • Disconnect from load-share bus at stand-by
  • Load-share bus protection against shorts to GND or to the supply rail
  • 8-pin VSSOP package minimizes space
  • Lead-free assembly

The UCC29002 device family comprises advanced, high-performance, low-cost load-share controllers that provide all necessary functions to parallel multiple independent power supplies or DC-to-DC modules. Targeted for high-reliability applications in server, workstation, telecom, and other distributed power systems, the controller is suitable for N+1 redundant systems or high-current applications where off-the-shelf power supplies must be paralleled.

The BiCMOS UCC29002 is based on the automatic leader/follower architecture of predecessor UC3902 and UC3907 load-share controllers. The device is capable of better than 1% current-share error between modules at full load by using a very-low offset post-package-trimmed current-sense amplifier and a high-gain negative-feedback loop. With an amplifier common-mode range of 0V to the VDD supply rail, the current-sense resistor, RSHUNT, can be placed in either the GND return path or in the positive output rail of the power supply.

The UCC29002 device family comprises advanced, high-performance, low-cost load-share controllers that provide all necessary functions to parallel multiple independent power supplies or DC-to-DC modules. Targeted for high-reliability applications in server, workstation, telecom, and other distributed power systems, the controller is suitable for N+1 redundant systems or high-current applications where off-the-shelf power supplies must be paralleled.

The BiCMOS UCC29002 is based on the automatic leader/follower architecture of predecessor UC3902 and UC3907 load-share controllers. The device is capable of better than 1% current-share error between modules at full load by using a very-low offset post-package-trimmed current-sense amplifier and a high-gain negative-feedback loop. With an amplifier common-mode range of 0V to the VDD supply rail, the current-sense resistor, RSHUNT, can be placed in either the GND return path or in the positive output rail of the power supply.
filter 기타 AC/DC 및 DC/DC 컨트롤러(외장 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
14개 모두 보기
유형 직함 날짜
* Data sheet UCC29002 and UCC39002 Advanced 8-Pin Load-Share Controller datasheet (Rev. J) PDF | HTML 2017/04/04
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 2024/04/30
More literature Design review of a 2-kW parallelable power supply module 2016/08/17
More literature Design review of a 2-kW parallelable power supply module (PPT) 2016/08/17
Application note Pre-biased Output Voltage Startup Operation of the UCC28950 2011/08/01
Application note Current Sharing in Redundant Systems 2010/01/08
User guide Using The UCC39002 With 3 PT4484 Modules (PR042 (Rev. B) 2009/07/29
Application note Load-Sharing TPS40050 Modules Using the UCC39002 Load-Share Controller 2004/04/13
User guide UCC39002 Advanced Load-Share Controller User's Guide, HPA027A (Rev. A) 2004/02/09
More literature 2003 Power Seminar - Paralleling Power 2003/07/14
Application note 48-VIN, 12-VOUT Loadshare System Using the UCC39002 with Three DC-DC Modules (Rev. A) 2003/02/14
Application note U-163 The UC3902 Load Share Controller and its Performance in Distributed Power (Rev. A) 2002/12/13
More literature Seminar 800 Topic 2 - Load Sharing With Paralleled Power Supplies 2001/02/15
Application note U-129 UC3907 Load Share IC Simplifies Parallel Power Supply Design 1999/09/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC39002EVM — UCC39002 평가 모듈

The UCC39002 is an advanced, high-performance load-share controller that provides all the necessary functions to parallel multiple independent power supplies or dc-to-dc modules. This load-share circuit is based upon the automatic master/slave architecture utilized in the UC3902 and UC3907 (...)

사용 설명서: PDF
TI.com에서 구매 불가
계산 툴

SLUC045 — MathCAD 2000 for Designing with UCC29002 Load Share Controller

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨트롤러(외장 FET)
UCC29002 — 고급 8핀 부하 공유 컨트롤러, -40°C~105°C UCC39002 — 고급 8핀 부하 공유 컨트롤러, 0°C~70°C
다운로드
계산 툴

SLUC684 — UCC29002 Excel Calculator Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨트롤러(외장 FET)
UCC29002 — 고급 8핀 부하 공유 컨트롤러, -40°C~105°C UCC39002 — 고급 8핀 부하 공유 컨트롤러, 0°C~70°C
다운로드
거버(Gerber) 파일

Gerber Files for UCC39002 and UCC29002

SLUC019.ZIP (129 KB)
다운로드
레퍼런스 디자인

PMP10099 — 역방향 전원 공급 장치 - 8개의 입력 1개의 출력 레퍼런스 디자인

This reference design is a power solution for reverse-powered telecom applications. Up to eight isolated inputs provide one common output; the load is shared equally between all active converters.
Test report: PDF
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
PDIP (P) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상