驅動程式或資料庫
AFE8XXX-SERDES-HSC-DESIGN — AFE80xx SERDES HSC design files
AFE80xx SERDES HSC design files
AFE8010
- Request full data sheet
- AFE80xx versions:
- AFE8000: 8 TX, 10 RX
- AFE8004: 4 TX, 4 RX
- AFE8010: 10 RX
- 12 GSPS RF Sampling DACs
- 4 GSPS RF Sampling ADCs
- Maximum RF signal bandwidth:
- TX: 800 MHz (8 ch) or 1.2 GHz (4 ch)
- RX: 800 MHz (8 ch) or 400 MHz (8 ch) + 800 MHz (2 ch)
- RF frequency range:
- TX: 5 MHz to 7.125 GHz
-
RX: 100 MHz to 7.125 GHz
- Digital Step Attenuators (DSA):
- TX: 40 dB range, 1 dB analog and 0.125 dB digital steps
- RX/FB: 25 dB range, 1 dB step
- Single or dual-band DUC, DDCs
- Dual NCOs per chain for fast frequency switching
- Supports TDD operation with fast switching between TX and RX
- Internal PLL/VCO to generate DAC/ADC clocks
- Optional external CLK at DAC or ADC rate
- SerDes data interface:
- JESD204B and JESD204C
- 8 SerDes transceivers up to 32.5 Gbps
- 8b, 10b and 64b, 66b Encoding
- 12 bit, 16 bit, 24 bit and 32 bit resolution
- Subclass 1 multi-device synchronization
- Package:
- 17 mm × 17 mm FCBGA, 0.8-mm pitch
The AFE8000 is a high performance, wide bandwidth multi-channel transceiver, integrating eight RF sampling DACs and 10 RF sampling ADCs. Pin and programming compatible lower channel count versions (AFE8004 with 4TX and 4RX channels, AFE8010 with 10RX channels) are available to allow scalable system designs.
Each receiver (RX) chain includes a 25 dB range DSA (Digital Step Attenuator) followed by a 4 GSPS ADC (analog-to-digital converter). The 10 ADCs are connected to 8 receiver paths (1RX though 8RX) and 2 feedback paths (1FB and 2FB). The ADCs are identical between RX and FB but the digital down converter paths are different (the FB paths are capable of wider bandwidth and can be used as receivers). Each receiver channel has analog peak power detectors and digital peak and power detectors to assist an external or internal autonomous automatic gain controller, and RF overload detectors for device reliability protection. The single or dual digital down converters (DDC) provide up to 800 MHz of signal BW for 8 channels or 400 MHz for 8 channels in addition to 800 MHz for 2 channels.
Each transmitter (TX) chain includes a single or dual digital up converter (DUC). Supporting up to 800 MHz signal bandwidth for eight channels or 1200 MHz for 4 channels. The output of the DUCs drives a 12-GSPS DAC (digital-to-analog converter) with a mixed mode output option to enhance 2nd Nyquist operation. The DAC output includes a variable gain amplifier (TX DSA) with 40 dB range and 1 dB analog and 0.125 dB digital steps.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | AFE80xx RF Sampling Transceiver datasheet (Rev. A) | PDF | HTML | 2023年 6月 15日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
AFE8000EVM — 適用八發射 (TX)、10 接收 (RX)、7-GHz 射頻取樣 AFE 的 AFE8000 評估模組
AFE8000 評估模組 (EVM) 是射頻取樣收發器平台，可同時設定為支援最多八個發射與十個接收 (8T10R) 通道。AFE8000EVM 可評估 AFE8000，其屬於八通道、射頻取樣、類比前端 (AFE) 系列，且該等 AFE 配備 14 位元、12-GSPS 數位轉類比轉換器 (DAC)、14 位元、4-GSPS 類比轉數位轉換器 (ADC)，以及適用 DAC 和 ADC 高頻率時脈產生的晶片內建整合式相鎖迴路/電壓控制振盪器 (PLL/VCO)。
AFE8000EVM (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCBGA (ABJ) | 400 | Ultra Librarian |
| FCBGA (ALK) | 400 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。