TAC5411-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ TA ≤ +125°C
- ADC Channel
- Performance:
- Line differential input dynamic range: 108dB
- Mic differential input dynamic range: 108dB
- THD+N: –95dB
- Channel summing mode supports high SNR
- Input voltage:
- Differential, 10-VRMS full-scale inputs
- Single-ended, 5-VRMS full-scale inputs
- Sample rate (fS) = 8kHz to 768kHz
- Programmable microphone bias (5V to 10V):
- With an integrated efficient boost converter, or
- With external high voltage HVDD supply
- Programmable microphone input fault diagnostics:
- Open inputs or shorted inputs
- Short to ground, MICBIAS or VBAT
- Microphone bias over current protection
- Performance:
- DAC Channel
- DAC performance:
- DAC to Line Out Dynamic Range: 119dB
- DAC to HP Out Dynamic Range: 115dB
- THD+N: –95dB
- Head Phone/Line Out output voltage:
- Differential, 2-VRMS full-scale
- Single-ended, 1-VRMS full-scale
- DAC sample Rates (fs) = 8KHz to 768KHz
- DAC performance:
- Common Features
- Low Latency Filter Selection
- Programmable HPF and Biquad Filters
- I2C Control Interface
- Audio Serial Interface
- Format: TDM, I2S or Left Justified
- Word Length: 16,20,24 or 32 Bits
- Programmable PLL for Flexible Clocking
- Single Supply Operation: 3.3V
- I/O Supply Operation: 1.2V, 1.8V or 3.3V
The TAC5411-Q1 is a high performance Mono Codec with 10VRMS differential Input, 108dB Mono ADC and 2VRMS Mono DAC Channels. The TAC5411-Q1 supports both differential and Single Ended input and output. Device supports both Microphone and Line In input on ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5411-Q1 can drive up to 62.5mW into a Headphone Load. The device also offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAC5411-Q1 integrates an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3V supply, The device can also directly use an external high-voltage supply (HVDD), which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The TAC5411-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes. It allows for sample rates up to 768kHz. The TAC5411-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C. These integrated high-performance features, along with a single, 3.3V supply operation, makes TAC5411-Q1 an excellent choice for space-constrained automotive systems.
您可能會感興趣的類似產品
引腳對引腳的功能與所比較的產品相同
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TAC5411-Q1 Automotive Low Power Mono Audio Codec with integrated programmable boost, micbias and diagnostics datasheet | PDF | HTML | 2022年 1月 13日 |
Application note | TAx5xxx-Q1 Fault Diagnostic Features | PDF | HTML | 2023年 11月 15日 | |
Application note | Clocking Configuration of Device and Flexible Clocking For TAx5x1x Family | PDF | HTML | 2023年 11月 8日 | |
Application note | Clock Error Configuration, Detection, and Modes Supported in TAx5x1x Family | PDF | HTML | 2023年 11月 7日 | |
Application note | Analog Input Configurations, Mixing and Muxing of TAx5x1x-Q1 Devices | PDF | HTML | 2023年 10月 30日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TAC5411Q15B5EVM-K — TAC5411-Q1 評估模組
PUREPATHCONSOLE — 適用於音訊系統設計和開發的 PurePath™ Console 圖形開發套件
PurePath Console’s (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WQFN (RTV) | 32 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。