首頁 放大器 特殊功能放大器 線路驅動器
首頁
放大器
特殊功能放大器
線路驅動器

THS6226

現行

H 類固定增益 VDSL2 雙埠低功耗 xDSL 和 PLC 線路驅動器

立即訂購
產品規格表

THS6226

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 2 Architecture DSL Line Driver, PLC Line Driver Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 30 BW at Acl (MHz) 125 Acl, min spec gain (V/V) 19 Vn at flatband (typ) (nV√Hz) 6.3 Vn at 1 kHz (typ) (nV√Hz) 13 Iq per channel (typ) (mA) 23.5 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 Input bias current (max) (pA) 6200000 Offset drift (typ) (µV/°C) 15 GBW (typ) (MHz) 125 Iout (typ) (mA) 383 2nd harmonic (dBc) 91 3rd harmonic (dBc) 91 Frequency of harmonic distortion measurement (MHz) 1
Number of channels 2 Architecture DSL Line Driver, PLC Line Driver Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 30 BW at Acl (MHz) 125 Acl, min spec gain (V/V) 19 Vn at flatband (typ) (nV√Hz) 6.3 Vn at 1 kHz (typ) (nV√Hz) 13 Iq per channel (typ) (mA) 23.5 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail No Features Adjustable BW/IQ/IOUT, Shutdown Rating Catalog Operating temperature range (°C) -40 to 85 Input bias current (max) (pA) 6200000 Offset drift (typ) (µV/°C) 15 GBW (typ) (MHz) 125 Iout (typ) (mA) 383 2nd harmonic (dBc) 91 3rd harmonic (dBc) 91 Frequency of harmonic distortion measurement (MHz) 1
VQFN (RHB) 32 25 mm² 5 x 5
  • Digitally-Adjustable Quiescent Current:
    7.6mA to 23.0mA
  • 1.0mA Bias Current Step
  • Independent Voltage Boost and Main Line Driver Disable
  • Low-Power Line Termination Mode
  • Full Capacitor Recharge: 3ms
  • Low Input Voltage Noise Density:
    6.3 nV/√Hz Input-Referred Voltage Noise
  • Low MTPR Distortion:
    70dB with +19.8dBm G.993.2—Profile 8b
  • –91dBc HD3 (1MHz, 60Ω Differential)
  • High Output Current: (383mA into 60Ω)
  • Wide Output Swing: 40VPP (+12V, 60Ω Differential Load with a 1:1.4 Transformer)
  • Wide Bandwidth: 125MHz
  • Port-to-Port Separation of 90dB at 1MHz
  • PSRR: 70dB at 1MHz for Good Isolation
  • APPLICATIONS
    • Ideal for All VDSL2 Profiles
    • Backwards-Compatible with ADSL/ADSL2+/ADSL2++ Systems

    PowerPAD is a trademark of Texas Instruments, Inc.
    All other trademarks are the property of their respective owners
    • Digitally-Adjustable Quiescent Current:
      7.6mA to 23.0mA
    • 1.0mA Bias Current Step
    • Independent Voltage Boost and Main Line Driver Disable
    • Low-Power Line Termination Mode
    • Full Capacitor Recharge: 3ms
    • Low Input Voltage Noise Density:
      6.3 nV/√Hz Input-Referred Voltage Noise
    • Low MTPR Distortion:
      70dB with +19.8dBm G.993.2—Profile 8b
    • –91dBc HD3 (1MHz, 60Ω Differential)
    • High Output Current: (383mA into 60Ω)
    • Wide Output Swing: 40VPP (+12V, 60Ω Differential Load with a 1:1.4 Transformer)
    • Wide Bandwidth: 125MHz
    • Port-to-Port Separation of 90dB at 1MHz
    • PSRR: 70dB at 1MHz for Good Isolation
  • APPLICATIONS
    • Ideal for All VDSL2 Profiles
    • Backwards-Compatible with ADSL/ADSL2+/ADSL2++ Systems

    PowerPAD is a trademark of Texas Instruments, Inc.
    All other trademarks are the property of their respective owners

    The THS6226 is a dual-port, class H, current-feedback architecture, differential line driver amplifier system ideal for xDSL systems. The device is targeted for use in very-high-bit-rate digital subscriber line 2 (VDSL2) line driver systems that enable native DTM signals while supporting greater than +20.5dBm line power (up to 8.5MHz) with good linearity, supporting the G.993.2 VDSL2 8b profile. It is also fast enough to support central-office transmission of +14.5dBm line power up to 30MHz.

    The unique architecture of the THS6226 allows quiescent current to be minimal while still achieving very high linearity. Differential distortion, under full bias conditions, is –91dBc at 1MHz and reduces to only –75dBc at 5MHz. Fixed multiple bias settings of the amplifiers offer enhanced power savings for line lengths where the full performance of the amplifier is not required. To allow for even more flexibility and power savings on all profiles, quiescent current is digitally adjustable from 7.6mA to 23mA with a bias current step of 1.0mA. For systems where additional power savings while not transmitting are desired, the THS6226 can be used in its line termination mode to maintain impedance matching.

    The wide output swing on +12V power supplies, coupled with excellent current drive, allows for wide dynamic headroom, keeping distortion minimal.

    The THS6226 is available in a QFN-32 PowerPAD™ package.

    The THS6226 is a dual-port, class H, current-feedback architecture, differential line driver amplifier system ideal for xDSL systems. The device is targeted for use in very-high-bit-rate digital subscriber line 2 (VDSL2) line driver systems that enable native DTM signals while supporting greater than +20.5dBm line power (up to 8.5MHz) with good linearity, supporting the G.993.2 VDSL2 8b profile. It is also fast enough to support central-office transmission of +14.5dBm line power up to 30MHz.

    The unique architecture of the THS6226 allows quiescent current to be minimal while still achieving very high linearity. Differential distortion, under full bias conditions, is –91dBc at 1MHz and reduces to only –75dBc at 5MHz. Fixed multiple bias settings of the amplifiers offer enhanced power savings for line lengths where the full performance of the amplifier is not required. To allow for even more flexibility and power savings on all profiles, quiescent current is digitally adjustable from 7.6mA to 23mA with a bias current step of 1.0mA. For systems where additional power savings while not transmitting are desired, the THS6226 can be used in its line termination mode to maintain impedance matching.

    The wide output swing on +12V power supplies, coupled with excellent current drive, allows for wide dynamic headroom, keeping distortion minimal.

    The THS6226 is available in a QFN-32 PowerPAD™ package.
    filter 尋找其它 線路驅動器
    下載 觀看有字幕稿的影片 影片

    您可能會感興趣的類似產品

    open-in-new 比較替代產品
    功能與所比較的裝置相似
    THS6222 現行 具有共模緩衝器的差動寬頻 PLC 和 HPLC 線路驅動器 Single port line driver for power line communication and DSL applications

    技術文件

    star =TI 所選的此產品重要文件
    找不到結果。請清除您的搜尋條件，然後再試一次。
    檢視所有 3
    類型 標題 日期
    * Data sheet Gated-Class H, Dual-Port, VDSL2 Line Driver datasheet (Rev. C) 2011年 4月 26日
    E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
    Application note Noise Analysis for High Speed Op Amps (Rev. A) 2005年 1月 17日

    設計與開發

    如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

    模擬型號

    THS6226 IBIS Model (Rev. A)

    SBOM459A.ZIP (6 KB) - IBIS Model
    下載
    模擬工具

    PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

    PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
    要求
    模擬工具

    TINA-TI — 基於 SPICE 的類比模擬程式

    TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
    使用指南: PDF
    View Options
    封裝 針腳 CAD 符號、佔位空間與 3D 模型
    VQFN (RHB) 32 Ultra Librarian
    適用 TI 的評估品項標準條款與條件。

    訂購與品質

    內含資訊：
    • RoHS
    • REACH
    • 產品標記
    • 鉛塗層/球物料
    • MSL 等級/回焊峰值
    • MTBF/FIT 估算值
    • 材料內容
    • 認證摘要
    • 進行中持續性的可靠性監測
    內含資訊：
    • 晶圓廠位置
    • 組裝地點

    支援與培訓

    內含 TI 工程師技術支援的 TI E2E™ 論壇

    以英文檢視所有論壇主題

    內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

    若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

    影片