Computer on module
Products and reference designs
Computer on module
Overview
Our integrated circuits and reference designs enable you to build a computer on a module in a small form-factor, enabling fanless solutions with scalable processing performance.
Design requirements
Computer on modules often require:
- Integrated and flexible power delivery.
- Scalable platforms for processing needs.
- Multi-protocol industrial communication and interface solutions.
Block diagram
Find products and reference designs for your system.
X86 based computer on module
Point-of-load regulators
Power management (45)
AC/DC & DC/DC converters (integrated FET)
-
TPS62A03—2.5V to 5.5V input, 3A high-efficiency synchronous buck converter in SOT-563 package
-
TPS51375—4.5V to 24V input, 12A continuous, 26A (max) synchronous buck converter
-
TPS51383—4.5-V to 24-V input, 8-A synchronous buck converter
-
LM70660—High-density, 4.5V to 65V input, 6A low-EMI synchronous DC/DC step-down converter
-
TPS62A02A—2.5V to 5.5V input, 2A high-efficiency step-down converter with forced PWM in SOT package
-
TPS62840—60-nA quiescent current (IQ), 1.8-V to 6.5-VIN, high-efficiency 750-mA step-down converter
Power modules (integrated inductor)
-
TPSM843620—4-V to 18-V input, advanced current mode, 6-A synchronous SWIFT™ step-down power module
-
TPSM82903—3-V to 17-V, 3-A, high-efficiency, low-IQ synchronous buck converter module with integrated inductor
AC/DC & DC/DC controllers (external FET)
-
LM51772—55V wide VIN four-switch buck-boost controller with I2C interface
-
LM51770—78V wide-VIN bidirectional 4-switch buck-boost controller
-
LM51551—2.2-MHz wide VIN nonsynchronous boost, flyback, & SEPIC controller with hiccup
-
TPS51275—5.5-V to 24-V, dual-synchronous buck controller with 5-V and 3.3-V LDOs
-
TPS51215A—3-V to 28-V input, single phase D-CAP2 controller with 2-bit VID
-
TPS53219A—3-V to 28-V, 20-A, synchronous D-CAP buck controller with Eco Mode
Load switches
-
TPS22997—5.5-V 10-A 4-mΩ on-resistance load switch with power good
-
TPS22992—5.5V 6A 8.7mΩ load switch with adjustable rise time and adjustable output discharge
-
TPS22990—5.5-V, 10-A, 3.9-mΩ load switch with adj. rise time, power good and optional output discharge
-
TPS22917—5.5-V, 2-A, 80-mΩ , 10-nA leakage load switch adj. rise time and adj output discharge
-
TPS22916—5.5-V, 2-A, 60-mΩ, 10-nA leakage load switch with output discharge
-
TPS22971—3.6-V, 3-A, 6.7-mΩ load switch with adj. rise time, power good, and output discharge
Supervisor & reset ICs
-
TLV803E—Low-power voltage supervisor (reset IC) with active-low open-drain output
-
TPS3899—Nanopower supervisor with programmable sense and reset delay
-
TPS3840—Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay
-
TPS3710—Wide-VIN voltage detector
-
TLV809E—Low-power voltage supervisor (reset IC) with active-low push-pull output
-
TPS3808E—600nA ultra-low quiescent current supervisor with programmable delay and manual reset
Linear & low-dropout (LDO) regulators
-
TPS7A96—2-A, ultra-low noise ultra-high PSRR RF voltage regulator
-
TLV771—150mA small-size high-PSRR low-dropout (LDO) linear regulator
-
TPS7A02—200mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable
-
TPS7A74—1.5-A low-dropout (LDO) linear regulator with programmable soft start
-
TPS7A19—450-mA, 40-V, low-IQ, adjustable low-dropout voltage regulator with power good & enable
-
TPS745—500-mA, low-IQ, high-accuracy, adjustable ultra-low-dropout voltage regulator with power good
Multi-channel ICs (PMICs)
-
TPS65094—Programmable mid input voltage range Power Management IC (PMIC) for Apollo Lake processors
-
TPS51716—Complete DDR2/3/3L/4 Memory Power Solution Synchronous Buck Controller, 2-A LDO
-
TPS53832A—Low-current PMIC for DDR5 server DIMMS with logging auto-clear function
-
TPS51200—3A Sink/Source DDR Termination Regulator w/ VTTREF Buffered Reference for DDR2, DDR3, DDR3L and DDR4
-
TPS51916—DDR2/3/3L/4 Memory Power Solution Synchronous Buck Controller
-
TPS51216—DDR2/3/3L/4 Memory Power Solution Synchronous Buck Controller, 2-A LDO, Buffered Reference
MOSFETs
-
CSD19534Q5A—100-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 15.1 mOhm
-
CSD19538Q2—100-V, N channel NexFET™ power MOSFET, single SON 2 mm x 2 mm, 59 mOhm
-
CSD25310Q2—-20-V, P channel NexFET™ power MOSFET, single SON 2 mm x 2 mm, 23.9 mOhm
-
CSD17577Q3A—30-V, N channel NexFET™ power MOSFET, single SON 3 mm x 3 mm, 6.4 mOhm
-
CSD18514Q5A—40-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 4.9 mOhm
-
CSD18534Q5A—60-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 9.8 mOhm
Technical documentation
No results found. Please clear your search and try again.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.
