Inicio Controladores para motores Drivers para motores de CC sin escobillas (BLDC) Controladores BLDC
Inicio
Controladores para motores
Drivers para motores de CC sin escobillas (BLDC)
Controladores BLDC
NUEVO

DRV8351-SEP

ACTIVO

Radiation-tolerant, 100-V max simple 3-phase gate driver with bootstrap diodes

Haga su pedido ahora
Hoja de datos

DRV8351-SEP

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Space Architecture Gate driver Vs ABS (max) (V) 100 Operating temperature range (°C) -55 to 125
Rating Space Architecture Gate driver Vs ABS (max) (V) 100 Operating temperature range (°C) -55 to 125
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • 40V Three Phase Half-Bridge Gate driver
    • Drives N-Channel MOSFETs (NMOS)
    • Gate Driver Supply (GVDD): 5-15V
    • MOSFET supply (SHx) supports up to 40V
  • Target Radiation Performance
    • SEL, SEB, and SET immune up to LET = 43 MeV-cm2 /mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2 /mg
    • TID assured for every wafer lot up to 30 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space-enhanced plastic (space EP):
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication site
    • Extended Product Life Cycle
    • Product Traceability
  • Integrated Bootstrap Diodes
  • Supports Inverting and Non-Inverting INLx inputs
  • Bootstrap gate drive architecture
    • 750mA source current
    • 1.5- sink current
  • Low leakage current on SHx pins (<55µA)
  • Absolute maximum BSTx voltage up to 57.5V
  • Supports negative transients up to -22V on SHx
  • Built-in cross conduction prevention
  • Fixed deadtime insertion of 200nS
  • Supports 3.3V and 5V logic inputs with 20V Abs max
  • 4nS typical propagation delay matching
  • Compact TSSOP package
  • Efficient system design with Power Blocks
  • Integrated protection features
    • BST undervoltage lockout (BSTUV)
    • GVDD undervoltage (GVDDUV)
  • 40V Three Phase Half-Bridge Gate driver
    • Drives N-Channel MOSFETs (NMOS)
    • Gate Driver Supply (GVDD): 5-15V
    • MOSFET supply (SHx) supports up to 40V
  • Target Radiation Performance
    • SEL, SEB, and SET immune up to LET = 43 MeV-cm2 /mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2 /mg
    • TID assured for every wafer lot up to 30 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space-enhanced plastic (space EP):
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication site
    • Extended Product Life Cycle
    • Product Traceability
  • Integrated Bootstrap Diodes
  • Supports Inverting and Non-Inverting INLx inputs
  • Bootstrap gate drive architecture
    • 750mA source current
    • 1.5- sink current
  • Low leakage current on SHx pins (<55µA)
  • Absolute maximum BSTx voltage up to 57.5V
  • Supports negative transients up to -22V on SHx
  • Built-in cross conduction prevention
  • Fixed deadtime insertion of 200nS
  • Supports 3.3V and 5V logic inputs with 20V Abs max
  • 4nS typical propagation delay matching
  • Compact TSSOP package
  • Efficient system design with Power Blocks
  • Integrated protection features
    • BST undervoltage lockout (BSTUV)
    • GVDD undervoltage (GVDDUV)

DRV8351-SEP is a three phase half-bridge gate driver, capable of driving high-side and low-side N-channel power MOSFETs. The DRV8351-SEPD generates the correct gate drive voltages using an integrated bootstrap diode and external capacitor for the high-side MOSFETs. GVDD is used to generate gate drive voltage for the low-side MOSFETs. The Gate Drive architecture supports peak up to 750mA source and 1.5A sink currents.

The phase pins SHx are able to tolerate significant negative voltage transients; while high side gate driver supply BSTx and GHx can support higher positive voltage transients (57.5V) abs max voltage which improve the robustness of the system. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency. Undervoltage protection is provided for both low and high sides through GVDD and BST undervoltage lockout.

DRV8351-SEP is a three phase half-bridge gate driver, capable of driving high-side and low-side N-channel power MOSFETs. The DRV8351-SEPD generates the correct gate drive voltages using an integrated bootstrap diode and external capacitor for the high-side MOSFETs. GVDD is used to generate gate drive voltage for the low-side MOSFETs. The Gate Drive architecture supports peak up to 750mA source and 1.5A sink currents.

The phase pins SHx are able to tolerate significant negative voltage transients; while high side gate driver supply BSTx and GHx can support higher positive voltage transients (57.5V) abs max voltage which improve the robustness of the system. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency. Undervoltage protection is provided for both low and high sides through GVDD and BST undervoltage lockout.
filter Buscar otro/a Controladores BLDC
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet DRV8351-SEP: 40-V Three-Phase BLDC Gate Driver datasheet PDF | HTML 09 dic 2024
* Radiation & reliability report DRV8351-SEP Total Ionizing Dose (TID) Report PDF | HTML 12 dic 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8351EVM — Módulo de evaluación DRV8351

El DRV8351 es un IC de controlador de puerta para aplicaciones de accionamiento de motores trifásicos y proporciona tres controladores de medio puente recortados y con compensación de temperatura de alta precisión, cada uno con capacidad para accionar los transistores de efecto de campo de (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 20 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos