首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)
首頁
放大器
運算放大器 (op amps)
高速運算放大器 (GBW ≥ 50 MHz)

LM6172

現行

雙高速、低功率、低失真電壓回饋放大器

alarm通知 立即訂購
產品規格表

LM6172

現行
產品規格表 立即訂購

產品詳細資料

Architecture Voltage FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 100 BW at Acl (MHz) 160 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3000 Vn at flatband (typ) (nV√Hz) 12 Vn at 1 kHz (typ) (nV√Hz) 12 Iq per channel (typ) (mA) 2.3 Vos (offset voltage at 25°C) (max) (mV) 1.5 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 110 Input bias current (max) (pA) 1500000 Offset drift (typ) (µV/°C) 6 Iout (typ) (mA) 85 2nd harmonic (dBc) 50 3rd harmonic (dBc) 50 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 5.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 GBW (typ) (MHz) 100 BW at Acl (MHz) 160 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 3000 Vn at flatband (typ) (nV√Hz) 12 Vn at 1 kHz (typ) (nV√Hz) 12 Iq per channel (typ) (mA) 2.3 Vos (offset voltage at 25°C) (max) (mV) 1.5 Rail-to-rail No Rating Catalog Operating temperature range (°C) -40 to 85 CMRR (typ) (dB) 110 Input bias current (max) (pA) 1500000 Offset drift (typ) (µV/°C) 6 Iout (typ) (mA) 85 2nd harmonic (dBc) 50 3rd harmonic (dBc) 50 Frequency of harmonic distortion measurement (MHz) 5
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6
  • Typical values unless otherwise noted
  • Easy-to-use voltage-feedback topology
  • High slew rate: 3000V/µs
  • Wide unity-gain bandwidth: 100MHz
  • Low supply current: 2.3mA/channel
  • High output current: 50mA/channel
  • Specified operation: ±15V and ±5V
  • Typical values unless otherwise noted
  • Easy-to-use voltage-feedback topology
  • High slew rate: 3000V/µs
  • Wide unity-gain bandwidth: 100MHz
  • Low supply current: 2.3mA/channel
  • High output current: 50mA/channel
  • Specified operation: ±15V and ±5V

The LM6172 is a dual, high-speed voltage-feedback amplifier. The device is unity-gain stable and provides excellent dc and ac performance. With a 100MHz unity-gain bandwidth, 3000V/µs slew rate, and 50mA of output current per channel, the LM6172 offers high performance in dual amplifiers, yet only consumes 2.3mA of supply current per channel.

The LM6172 operates on ±15V power supplies for systems requiring large voltage swings, such as ADSL, scanners and ultrasound equipment. The device is also specified for ±5‑V power supplies for low-voltage applications, such as portable video systems.

The LM6172 is built with TI’s advanced complementary bipolar process. See the LM6171 data sheet for a single amplifier with these same features.

The LM6172 is a dual, high-speed voltage-feedback amplifier. The device is unity-gain stable and provides excellent dc and ac performance. With a 100MHz unity-gain bandwidth, 3000V/µs slew rate, and 50mA of output current per channel, the LM6172 offers high performance in dual amplifiers, yet only consumes 2.3mA of supply current per channel.

The LM6172 operates on ±15V power supplies for systems requiring large voltage swings, such as ADSL, scanners and ultrasound equipment. The device is also specified for ±5‑V power supplies for low-voltage applications, such as portable video systems.

The LM6172 is built with TI’s advanced complementary bipolar process. See the LM6171 data sheet for a single amplifier with these same features.
filter 尋找其它 高速運算放大器 (GBW ≥ 50 MHz)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet LM6172 Dual, High-Speed, Low-Power, Low-Distortion, Voltage-Feedback Amplifier datasheet (Rev. E) PDF | HTML 2024年 12月 11日
E-book The Signal e-book: A compendium of blog posts on op amp design topics 2017年 3月 28日
Application note OA-26 Designing Active High Speed Filters (Rev. C) 2013年 5月 7日
More literature Die D/S LM6172 MDE Dual High Speed, Low Power, Low Distortion Voltage Feedback 2012年 12月 20日
More literature Die D/S LM6172 MDR Dual High Speed, Low Power, Low Distortion Voltage Feedback 2012年 12月 20日
More literature Die D/S LM6172 MDR MCD3010A Dual High Speed, Low Power, Low Dist Voltage Feed 2012年 12月 20日
More literature Die D/S LM6172 MDC Dual Hi Spd, Low Pwr, Low Distortion Voltage Feedback Amp 2012年 9月 27日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMH730036 — 適用於 8 針腳 SOIC 封裝之高速雙運算放大器的評估板

Texas Instruments offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 8-Pin SOIC package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The (...)

使用指南: PDF
模擬型號

LM6172 PSpice Model (Rev. A)

SNOM234A.ZIP (185 KB) - PSpice Model
下載
計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
View Options
計算工具

VOLT-DIVIDER-CALC — Voltage divider calculation tool

The voltage divider calculation tool (VOLT-DIVIDER-CALC) quickly determines a set of resistors for a voltage divider. This KnowledgeBase JavaScript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. VOLT-DIVIDER-CALC can also be used to (...)
立即進行設計
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
PDIP (P) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片